Word table in line with text

Just like you can wrap text around an image in your document, the same is possible with tables. If you have a small table and want a more pleasing appearance, here’s how to wrap the text around it in Microsoft Word.

1. Right-click on the table and select “Table Properties.”
2. In the Table tab, select the “Around” option.
3. Adjust the wrapping by dragging and dropping the table, or by clicking “Positioning” in Table Properties.

By default, Word places tables outside of the text. This allows you to manually or even automatically resize your table to fit the page or its contents. But it takes only a few clicks to place your table in line with your text.

Select the table and either right-click and choose “Table Properties” or pick “Properties” in the floating toolbar.

Go to the Table tab in the pop-up window. In the Text Wrapping section at the bottom, select Around and click “OK.”

You’ll immediately see your table and text move to accommodate each other.

Position a Table With the Text

If the way the table and text appear together needs some tweaking, you have a few options.

To move the table, select it and drag it to its new location within the text. Keep in mind that line breaks or different paragraphs in your text block may affect where the table lands.

You can also consider resizing the table, changing the alignment, or adjusting the table position. An easy way to do this is to return to the Table Properties window.

RELATED: How to Align a Table Horizontally in Microsoft Word

On the Table tab, you have an option for Size right at the top where you can enter or use the arrows for the exact width of the table rather than manually resizing it. Beneath Size, you can adjust the Alignment for left, center, or right.

For even more options, click “Positioning.” This button is only available when you choose Around under Text Wrapping.

In the Table Positioning window, you can choose the Horizontal position for the table relative to the column, margin, or page. Plus, you can adjust the Vertical position relative to the paragraph, margin, or page.

You can also enter measurements for how far you want the table from the surrounding text. Enter the inches for Top, Bottom, Left, or Right, or use the arrows to increase or decrease those measurements.

Below Options at the bottom of the window, you can optionally check the boxes to move the table with the text and allow overlapping with other tables.

When you finish, click “OK” to see the changes in your document.

If you have a little table that doesn’t stretch the width of the document or has a small amount of content inside, wrapping the text around your table may give that section of your document the ideal appearance.

READ NEXT

• › How to Make Only One Page Landscape in a Word Document
• › How to Convert a Table to an Image in Microsoft Word
• › How to Move a Table in Microsoft Word
• › How to Get a Refund on the PlayStation Store
• › Discord Direct Message Won’t Go Away? Here’s the Fix
• › Save Hundreds on Elegoo’s New PHECDA Laser Engraver Through Kickstarter
• › The New Winamp Is Here, but It’s Not What You’d Expect
• › Android’s Nearby Share Has (Unofficially) Arrived on Mac

How to put a table inline with the text

---

A table is a collection of information or data, usually represented by horizontal rows and vertical columns. Each column and each row can have a header. Some tables have only column headings or only row headings. The box at the junction of each column and row is a cell that contains data such as text, numeric information, or images. Some cells can be merged or split (see more about formatting tables). E.g.:

Microsoft Word has many features that make working with tables simple and convenient.

Create a table

There are several ways how to insert or create a table:

To create a blank table in a Word document, do the following:

   1.   Place your cursor where you want to insert the table.

   2.   On the Insert tab, in the Tables group, click the Table button:

   3.   Do one of the following:

Create a blank table of up to 10 columns and 8 rows

• To create a table of up to 10 columns and 8 rows, move the cursor right (to select columns) and down (to select rows) the grid to select as many cells as you need. E.g., the table of 5 columns and 3 rows (selected cells will turn orange):

  

  Click on a cell in the grid with the expected number of rows and columns (or press Enter) to insert an empty table to fit the width of the text (paragraph).

  The table has the specified number of single-line text rows in the current paragraph and equal-width columns. E.g., the table of 3 rows and 5 columns:

  

Create a blank table with more than 10 columns or more than 8 rows

• To create a table with more than 10 columns or more than 8 rows, do one of the following:
  • Create a table with exactly 10 columns or 8 rows, then add as many columns or rows as you need (see below how to customize table).
  • Click the Insert Table… option:

    

    In the Insert Table dialog box:

    

    • In the Table size group, specify the number of columns and rows,
    • In the AutoFit behavior group, specify the width of the table and its columns:
      • Select the Fixed column width option to customize width in the appropriate field: select Auto (used by default) or specify width. E.g., 0.75″:

      

      • Select the AutoFit contents option to adjust cell sizes to the document content. E.g.:

      

      • Select the AutoFit to window option to adjust the table’s width to the document content width. E.g.:

      

    • Select the Remember dimension for new tables check box if you want to create tables with the same options later. Word will remember your customization.

Create a blank table manually

• To manually create an empty table, click the Draw Table option:

  

  After clicking that option, the cursor changes to the pencil that allows drawing cells directly in the Word document to create a table:

  

  Click anywhere in a document but the table itself by the pencil to stop drawing a table.

  Notes:

  1. To draw additional lines, select a table, then on the Table Layout tab, in the Draw group, click the Draw Table button:

     

  2. If you draw a line in the wrong position, click the Eraser button in the Draw group of the Table Layout tab:

     

  3. We recommend displaying the rulers or gridlines to help you place the lines correctly.

Create a table using predefined templates

To create a table using predefined Word templates of tables and calendars, do the following:

   1.   Place your cursor where you want to insert the table.

   2.   On the Insert tab, in the Tables group, click the Table dropdown list, then select Quick Tables list:

   3.   From the Quick Tables gallery, select the template you prefer.

For example:

Create a table from the existing data

To create a table from the existing data in a document data (either as regular text or as a tabbed list), do the following:

   1.   Select the document data you want to shape into a new table.

   2.   On the Insert tab, in the Tables group, click the Table dropdown list, then select Convert Text to Table…:

   3.   In the Convert Text to Table dialog box:

• In the Table size group, specify the number of columns,
• In the AutoFit behavior group, specify whether the width of the columns should be fixed (see details above),
• In the Separate text at group, select the character that separates text into columns in the selected text: paragraph marks, commas, tabs, or some other character.

E.g.:

Insert a Microsoft Excel spreadsheet

Note: It is possible to insert a Microsoft Excel spreadsheet in a document. To do so, on the Insert tab, in the Tables group, click the Table dropdown list, then select Excel Spreadsheet:

Word opens the Excel spreadsheet where you can enter the data. You can use Excel features such as functions and formulas to create or manipulate the data. Note that it is not a Word table.

Add rows and columns

To add a row and a column to a table, do the following:

   1.   Position the cursor:

• to a cell in a row above or below which you need to insert a row,
• to a cell in a column left or right which you need to insert a column.

   2.   Do one of the following:

• Click the Insert dropdown list in the Mini toolbar:

  

• On the Table Layout tab, in the Rows & Columns group:

  

  • Click the Insert Above button to insert a row above the row with the cursor,
  • Click the Insert Below button to insert a row below the row with the cursor,
  • Click the Insert Left button to insert a column left to the column with the cursor,
  • Click the Insert Right button to insert a column right to the column with the cursor.
• Right-click and select the Insert list:

  

Notes:

1. To insert rows or columns, move the mouse over the table or left of the table until you see the Insertion indicator, then click the icon:

     and  
   

2. You can choose the option Insert -> Insert Cells… from the popup menu; Word opens the Insert Cells dialog box:

   

   After selecting the option and clicking the OK button, Word adds an entire row or column, not a cell. Word just moves cells according to the selection.

Delete a table element

To delete a table element, do the following:

   1.   Select the cell, multiple cells, the entire column or multiple columns, the entire row, or multiple rows.

   2.   Do one of the following:

• Click the Delete dropdown list in the Mini toolbar:

  

• On the Table Layout tab, in the Rows & Columns group, click the Delete dropdown list, then select one of the options:

  

   3.   Select one of the proposed options:

Note: You can select the element you want to delete, right-click on the selection and select the appropriate item in the popup menu. For example, if the entire table is selected or the column is selected:

  and  

Convert a table into text

To convert a table into text in Word, follow the next steps:

   1.   Click anywhere in the table.

   2.   On the Layout tab, in the Format group, click the Convert to Text button:

   3.   In the Convert Table to Text dialog box, select the charter to separate cells data in the text:

   4.   Click OK.