Word not correcting spelling and grammar

Have you ever had one of those days where you’re finishing an important document, but the spell check in Microsoft Word isn’t working correctly? Sometimes you can’t check one document, and other times you can’t spell-check any document. And sometimes, it’s several words. In this troubleshooting tutorial, I’ll show several fixes.

I’ve encountered this annoyance many times. Usually, I can solve the issue with the steps below unless it’s a protected Microsoft Word document. However, one reason you want to correct this issue is that it may interfere with calculating your Word readability statistics.

Spell Check Not Working – (1 Document)

Sometimes Word’s spell check will only work for one document. However, you can open other Microsoft Word documents, and spell check works. The problem is probably with the preferred languages or formatting settings.

Verify Your Language & Check Spelling Options

1. Open the problem document.
2. Press the Ctrl + A keys to select the entire text.
3. From the Review tab, select Language then Set Proofing Language…
4. In the Language dialog box make sure the correct default language is selected.
5. Verify the checkbox Do not check spelling or grammar is unchecked.

1. Click OK.
2. Recheck your document

I wish the above method were foolproof. Highlighting the entire document would overwrite all paragraph settings throughout. On older versions of Microsoft Word, I would get the following message as shown below. However, in Microsoft 365, I no longer get this alert even if I have spelling errors.

This alert message suggests that your document has a section marked “Do not check spelling or grammar.” Unfortunately, I don’t know any easy way to find these marks. So instead, I find a paragraph with a spelling mistake, highlight it, and press Shift + F1.

This opens the Reveal Formatting pane, where you can verify that your correct language is what you expect and if the paragraph has spell check turned off. In the example below, the highlighted paragraph is coded not to check for spelling.

Tip: If you don’t see the pane, you may have some sort of Function lock on your keyboard. Generally, these keyboards have an F Lock key on the top row because there are other functions mapped. Other keyboards may use an Fn key.

In the above example, I misspelled the word “government”. Word did not flag this instance because the paragraph was marked not to do spelling or grammar checks.

To fix the issue, highlight your paragraph and click the Language link in the Reveal Formatting dialog. This will open the Language dialog box, and you can deselect the check spelling or grammar option checkbox.

Are Multiple Proofing Languages Set

Looking at the screen print above, you’ll notice that I have three proofing languages above the double line. They are variations of English for Australia, Canada, United States. Word can get confused if you don’t enable “Detect language automatically“.

According to this support page, Microsoft noted several suggestions:

• Automatic language detection requires that a sentence of text be written in that language. Depending on the length of your sentences, you might need to type several sentences before Word has enough contextual information to automatically detect the language and apply the correct dictionary.
• Words that are spelled the same way in several languages, such as “centre” in English (United Kingdom) and French (France) might cause the Detect language automatically check box to incorrectly identify the language of text. To solve this problem, type more words in the language you want, or clear the Detect language automatically check box.

Review Your Proofing Exception Options

You should check another setting, as there is a Word option where you can elect to hide spelling errors. You can set this option on an individual file.

1. Click the File tab.
2. From the left panel, select Options.
3. In the Word Options dialog, click Proofing.
4. Scroll to the bottom area called Exceptions for:
5. Check to see if the Hide spelling errors in this document only check box is enabled.

Spell Check Not Working – (All Documents)

This second problem can be a real annoyance with many variations. The suggestions range from easy to a Microsoft Windows registry change.

Option 1: Verify the “check spelling as you type” Feature

This feature is an option to see your mistakes as they happen. In some cases, I’ve seen toggling this check box “on” and “off” fix the problem. Additionally, those red squiggly underlines might be from the Word Exclusion Dictionary.

To verify Spelling and Grammar Checkers are on,

1. Click the File tab.
2. From the left menu, select Options at the bottom.
3. In the Word Options dialog, click Proofing.
4. Check the boxes for Check spelling as you type and Mark grammar errors as you type. (See picture above.)
5. Click OK.

Note: For older versions of Word, use the Check Document feature on your Review tab.

Option 2: Check for Conflicting Word Add-in

Still, your problem may be caused by a combination of factors such as another Word add-in. The way to verify this is to see if the spellchecker works in “safe mode”. Safe Mode is a reduced functionality state where Microsoft Word loads without add-ins.

1. Hold down your Ctrl key and then press the icon or menu option for Microsoft Word.
2. Click Yes when the Safe Mode dialog appears.

1. Open up your document.
2. Press F7 to run spell-check.

If the spellchecker works, you need to figure out which add-in is causing the problem. There are two areas where you may see these.

The first is from the Insert tab.

If you click My Add-ins, you will see your installed items. If you hover over an item, a 3-dot menu will appear where you can remove the item.

Additionally, you can access this area from the Word Options dialog box under Add-ins. Hopefully, you recognize an add-in name such as Grammarly. Then you can press the Go button.

You’ll then get a COM Add-ins dialog where you can uncheck the box so it won’t load or remove it. 

I’d suggest closing Word and reopening your document before checking again.

Option 3: Rename Your Word Template

Your Microsoft Word document template, which is either normal.dot or normal.dotm, might also be causing an issue. You can find these files in your Microsoft Templates folder. When you rename the template, Word will reset to the default settings.

Because your global template file has your settings, I would recommend renaming the file to something like normalPRV.dot or normalPRV.dotm so you can change the name if this suggestion doesn’t work.

Tip: If you need to confirm the location of your template you can press your Windows key + r. This will open the Run dialog, where you can copy and paste the command below.

%appdata%MicrosoftTemplates

Option 4: Try Detect and Repair

Now and then, I have the spell-check feature go wonky after some other software update or hardware change. For example, a registry entry has become corrupted. In these rare cases, you may have to repair your installation.

Option 5: Rename a Windows Registry Folder

I don’t like giving instructions on using the Windows registry. But sometimes, this online repair works. If you’re unfamiliar with this area, I strongly recommend reading Microsoft’s https://docs.microsoft.com/en-US/troubleshoot/windows-server/performance/windows-registry-advanced-users.

As with an earlier suggestion, I rename the folder rather than deleting it. Some people rely on third-party dictionaries that may use some of these entries. If you find after renaming the folder, your 3rd party dictionary doesn’t work; you can revert the changes.

To rename the Proofing Tools folder,

1. Close Word.
2. Press the Windows key + R.
3. In the Run dialog box type regedit.
4. Click the OK button.
5. Expand the left pane to HKEY_CURRENT_USER | Software | Microsoft | Shared Tools| Proofing Tools
6. Right-click the folder named 1.0
7. Select Rename from the menu.

1. Rename folder to 1PRV.0
2. Close regedit.
3. Restart Microsoft Word.

Specific Word Isn’t Flagged as Misspelled

Sometimes, you’ve run through the steps above and Word still doesn’t flag an item that is misspelled. This can be frustrating, but sometimes the problem is us. Yes, I have misspelled words when adding them to Word’s custom spell check dictionary. That’s why I also created an exclude dictionary for Word.

Check Your Custom Dictionary

1. Click the File tab.
2. From the left menu, select Options at the bottom.
3. In the Word Options dialog, click Proofing.
4. Scroll down to When correcting spelling in Microsoft Office program section.
5. Click the Custom Dictionaries… button.
6. Click the Edit Word List… button.

1. Find your misspelled word and delete it.
2. Add correct variation if needed.
3. Click OK.

Try Another Online Option & Then Fix

This isn’t a fix for the problem, but it buys you time if you’ve got a deliverable. In the interim, you can save your document and try to open or copy it to another online word processor such as Google Docs or Microsoft Word Online. You will need to have an online account. Once you’ve imported your document, use that system’s spell-checker.

Hopefully, these solutions helped you isolate why spell-check wasn’t working. Now, you can continue to write your great novel, business proposal, letter, or tutorial.

• How to Make Symbols with a Keyboard
• How to Make a Letterhead Template with Word
• How to Add Watermark in Word
• How to Compress a Word Document
• Video: How to Make a Letterhead in Word

All Microsoft Office programs can check spelling, and most can check grammar.

Using Microsoft 365? You may be interested in checking out the powerful new Editor feature in Word! See Editor — your writing assistant for more information.

Run the spelling and grammar checker

To start a check of the spelling and grammar in your document, just press F7.

Click a heading below for more information

See Also

Check spelling and grammar in a different language.

Test your document’s readability

The spelling and grammar checker isn’t working as expected

Select grammar and writing style options in Office 2013 and earlier

Add words to your spell check dictionary

The spelling or grammar checker isn’t checking words in a different language correctly

Choose AutoCorrect options for capitalization, spelling, and symbols

Check spelling before sending a message in Outlook

Learn how to get more from Editor with Microsoft 365

Office for Mac applications automatically check for potential spelling and grammatical errors as you type. If you’d rather wait to check spelling and grammar until you’re done writing, you can turn off automatic checking, or you can check spelling and grammar all at once.

Word

Check spelling and grammar automatically as you type

Word marks potential spelling errors with a red squiggly line, and potential grammatical errors are marked with a green squiggly line.

Tip: If spelling or grammatical errors aren’t marked, you might need to turn on automatic spelling and grammar checking, which is explained in the next procedure.

When you see a spelling or grammatical error, Control click the word or phrase and choose one of the options.

If Word has incorrectly flagged a word as misspelled and you want to add that word to your dictionary so that Word will properly recognize it in the future see Add or edit words in a spell check dictionary

1. On the Word menu, click Preferences > Spelling & Grammar.

2. In the Spelling & Grammar dialog box, under Spelling, check or clear the Check spelling as you type box.

3. Under Grammar, check or clear the Check grammar as you type box.

4. Close the dialog box to save your changes.

1. On the Review tab, click Spelling & Grammar.

2. If Word finds a potential error, the Spelling & Grammar dialog box will open, spelling errors will be shown as red text, and grammatical errors will be shown as green text.

3. To fix an error, do one of the following:

   • Type the correction in the box and then click Change.

   • Under Suggestions, click the word you want to use, and then click Change.

   To skip the error, do one of the following:

   • Click Ignore to skip only that instance of the error.

   • Click Ignore All to skip all instances of the error.

   • For a grammatical error, click Next Sentence to skip that instance of the error and move to the next error.

   To skip a misspelled word in all documents, click Add to add it to the dictionary. This only works for misspelled words. You can’t add custom grammar to the dictionary.

4. After you correct, ignore, or skip an error, Word moves to the next one. When Word finishes reviewing the document, you’ll see a message that the spelling and grammar check is complete.

5. Click OK to return to your document.

You can clear or reset the list of Ignored Words and Grammar so Word will check for spelling and grammar issues you previously told it to ignore.

Note: When you reset the list of Ignored Words and Grammar, the list is cleared only for the currently open document. Any spelling or grammar issues you told Word to ignore in other documents won’t be affected.

1. Open the document that needs to be checked.

2. On the Tools menu, point to Spelling and Grammar, and then click Reset Ignored Words and Grammar.

   

   Word displays a warning about the operation resetting the spelling checker and the grammar checker.

   

3. Click Yes to proceed.

4. Click the Review tab, and then click Spelling & Grammar to check spelling and grammar.

Outlook

Check spelling and grammar automatically as you type

By default, Outlook checks for spelling errors as you type. Outlook uses a dashed red underline to indicate possible spelling errors and a dashed green line to indicate possible grammatical errors.

1. When you see a word with a dashed underline, Control click the word or phrase and choose one of the options.

   

2. On the shortcut menu, do one of the following:

   • Click one of the guesses at the top of the shortcut menu.

   • Click Ignore Spelling to ignore one instance of the word.

   • Click Learn Spelling to add the word to the spelling dictionary.

After opening an email message:

• To have Outlook correct spelling mistakes automatically, on the Outlook menu, click Preferences. Click on Spelling and Grammar under Personal Settings. Click box next to Checkspelling as you type.

• To turn automatic grammar checking on or off, on the Outlook menu, click Preferences. Click on Spelling and Grammar under Personal Settings. Click box next to Check grammar as you type.

You can correct all the spelling and grammar issues at the same time after you finish composing a message or other items.

1. On the Edit menu, point to Spelling and Grammar, and then click Spelling and Grammar…

2. Do any of the following:

   • In the list of suggestions, click the word that you want to use, or enter a new spelling in the box at the top, and then click Change.

   • Click Ignore to ignore this word and move on to the next misspelled word.

   • Click Add to add the word to the spelling dictionary.

Tip: The keyboard shortcut for skipping to the next spelling or grammar error is + ; .

PowerPoint

You can check spelling in PowerPoint, but you can’t check grammar.

Check spelling automatically as you type

PowerPoint automatically checks for and marks potential spelling errors with a wavy, red underline.

Tip: If spelling errors aren’t marked, you might need to turn on automatic spell checking, which is explained in the next procedure.

When you see a spelling error, Ctrl+click or right-click the word or phrase and choose one of the suggested options.

1. On the PowerPoint menu, click Preferences > Spelling.

2. In the Spelling dialog box, select or clear the Check spelling as you type box.

1. On the Review tab, click Spelling.

2. If PowerPoint finds a potential error, the Spelling pane opens and spelling errors are shown.

3. To fix an error, do one of the following:

   • Correct the error on your slide.

   • Click one of the suggested words in the Spelling pane, and then click Change.

   To skip the error, do one of the following:

   • Click Ignore to skip only that instance of the error.

   • Click Ignore All to skip all instances of the error.

   • click Add to skip a misspelled word in all documents and add it to the dictionary.

4. After you correct, ignore, or skip an error, PowerPoint moves to the next one. When PowerPoint finishes reviewing the presentation, you’ll see a message that the spelling check is complete.

5. Click OK to return to your presentation. 

Excel

You can check spelling in Excel, but you can’t check grammar.

Check spelling all at once

1. On the Review tab, click Spelling.

   Note: The Spelling dialog box will not open if no spelling errors are detected, or if the word you are trying to add already exists in the dictionary.

2. Do any of the following.

   To	Do this
   Change the word	Under Suggestions, click the word that you want to use, and then click Change.
   Change every occurrence of this word in this document	Under Suggestions, click the word that you want to use, and then click Change All.
   Ignore this word and move on to the next misspelled word	Click Ignore Once.
   Ignore every occurrence of this word in this document and move on to the next misspelled word	Click Ignore All.

See also

Check spelling and grammar in a different language

Get your automatic editor back in action

Updated on April 20, 2022

While Word’s spell check works well most of the time, sometimes it can appear to stop operating. Some simple troubleshooting steps will quickly get Word’s spelling and grammar-checking tool back up and running. These solutions apply to Word for Microsoft 365, Word 2019, Word 2016, Word 2013, Word 2010, and Word for Mac.

Causes of Word’s Spell Check Not Working

There are several reasons Word’s spelling and grammar-checking tool might not be working. You might have changed a simple setting, or the language settings may be off. Exceptions may have been placed on the document or the spell-check tool, or the Word template may have an issue.

Whatever the reason, some easy fixes are likely to have Word back to pointing out mistakes in your documents soon.

The spelling and grammar checker may return an error message about the default language or say «Spelling and grammar check is complete» without flagging any errors. You may not receive any message but may notice the tool isn’t functioning.

Add Grammarly to Word: Learn How Now

How to Fix Word’s Spell Checker Not Working

Follow these troubleshooting steps in the order we present, from the simplest solution to the most complex.

1. Make sure Word spell check is turned on, the most likely culprit and most straightforward solution. If you haven’t enabled automatic spell-checking, the tool won’t function as you expect. Also, select the Mark grammar errors as you type and Check grammar with spelling check boxes.

   On a Mac, select Word > Preferences > Spelling & Grammar, and select the Check spelling as you type and Check grammar as you type check boxes.

2. Check Word’s proofing language. Word may be set to the wrong proofing language, causing it to miss errors. Make sure Word is proofing in the correct language, and see if this solves the problem.

3. Check for proofing exceptions. A setting for Hide proofing errors, or other exceptions, may have been enabled in the document. The spell-check tool might not work as expected if a user has made exceptions for checking the spelling or grammar.

4. Open Word in Safe Mode. A Word add-in can interfere with the spelling and grammar-checking tool, causing it to work sporadically or not at all. If you start Word in Safe Mode, add-ins aren’t enabled. See if the spelling and grammar-checking tool works. If it does, move on to step 5.

5. Disable add-ins one at a time. An add-in might be the problem if the spelling and grammar-checking tool worked in Safe Mode. Disable add-ins one at a time to isolate the one causing the issue. When you find the culprit, permanently disable it.

6. Rename the default template. If the issue still isn’t resolved, there could be something wrong with Word’s global template, which is called normal.dotm. Renaming the template could fix the problem. Word will generate a new default document without any customizations.

   When you rename the normal.dotm template, you lose the default settings you established, including styles, toolbars, AutoText entries, and macros.

7. Repair Word. If all your efforts haven’t resolved the spell-check problem, use the built-in Office Repair utility to fix Word. This tool repairs the entire Office suite even if there’s only one application you want to fix.

   This tool is only available for Windows versions of Office.

8. Contact Microsoft Word. If you still can’t fix the problem with Word’s spelling and grammar-checking tool not working, visit the Microsoft Word help page. With a searchable knowledge base, community forums, and contact information, you’ll find additional help.

FAQ

• Why is Grammarly not working in Word?

  If Grammarly in Word isn’t working, you may be working in a password-protected document, you may have opened the document in Protected View, or the document is stored on a network. To solve the problem, save your document to a local drive and open it from there.

• How do I turn off spell check in Word?

  To turn off spell check in Word on a PC, go to File > Options > Proofing. Uncheck the box next to Check spelling as you type. On a Mac, go to Tools > Spelling & Grammar and select Hide Spelling Errors.

• How do I reset spell check in Word?

  To reset Word’s spell check on a PC, go to the Tools menu and select Spelling & Grammar > Options. In the Proofing Tools section, select Recheck Document. On a Mac, go to Tools > Spelling & Grammar and select Reset Ignored Words and Grammar.

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day

Subscribe

/en/word2016/charts/content/

Introduction

Worried about making mistakes when you type? Don’t be. Word provides you with several proofing features—including the Spelling and Grammar tool—that can help you produce professional, error-free documents.

Optional: Download our practice document.

Watch the video below to learn more about using the Spelling and Grammar tool.

To run a Spelling and Grammar check:

1. From the Review tab, click the Spelling & Grammar command.

   

2. The Spelling and Grammar pane will appear on the right. For each error in your document, Word will try to offer one or more suggestions. You can select a suggestion and click Change to correct the error.

   

3. Word will move through each error until you have reviewed all of them. After the last error has been reviewed, a dialog box will appear confirming that the spelling and grammar check is complete. Click OK.

   

If no suggestions are given, you can manually type the correct spelling in your document.

Ignoring «errors»

The spelling and grammar check is not always correct. Particularly with grammar, there are many errors Word will not notice. There are also times when the spelling and grammar check will say something is an error when it’s actually not. This often happens with names and other proper nouns, which may not be in the dictionary.

If Word says something is an error, you can choose not to change it. Depending on whether it’s a spelling or grammatical error, you can choose from several options.

For spelling «errors»:

• Ignore: This will skip the word without changing it.
• Ignore All: This will skip the word without changing it, and it will also skip all other instances of the word in the document.
• Add: This adds the word to the dictionary so it will never come up as an error. Make sure the word is spelled correctly before choosing this option.

For grammar «errors»:

• Ignore: This will skip the word or phrase without changing it.

For some grammatical errors, Word will provide an explanation for why it thinks something is incorrect. This can help you determine whether you want to change or ignore it.

Automatic spelling and grammar checking

By default, Word automatically checks your document for spelling and grammar errors, so you may not even need to run a separate check. These errors are indicated by colored wavy lines.

• The red line indicates a misspelled word.
• The blue line indicates a grammatical error, including misused words.

  

A misused word—also known as a contextual spelling error—occurs when a word is spelled correctly but used incorrectly. For example, if you used the phrase Deer Mr. Theodore at the beginning of a letter, deer would be a contextual spelling error. Deer is spelled correctly, but it is used incorrectly in the letter. The correct word is Dear.

To correct spelling errors:

1. Right-click the underlined word, then select the correct spelling from the list of suggestions.

   

2. The corrected word will appear in the document.

You can also choose to Ignore All instances of an underlined word or add it to the dictionary.

To correct grammar errors:

1. Right-click the underlined word or phrase, then select the correct spelling or phrase from the list of suggestions.

   
2. The corrected phrase will appear in the document.

To change the automatic spelling and grammar check settings:

1. Click the File tab to access Backstage view, then click Options.

   

2. A dialog box will appear. On the left side of the dialog box, select Proofing. From here, you have several options to choose from. For example, if you don’t want Word to mark spelling errors, grammar errors, or frequently confused words automatically, simply uncheck the desired option.

   

If you’ve turned off the automatic spelling and/or grammar checks, you can still go to the Review tab and click the Spelling & Grammar command to run a new check.

To hide spelling and grammar errors in a document:

If you’re sharing a document like a resume with someone, you might not want that person to see the red and blue lines. Turning off the automatic spelling and grammar checks only applies to your computer, so the lines may still show up when someone else views your document. Fortunately, Word allows you to hide spelling and grammar errors so the lines will not show up on any computer.

1. Click the File tab to go to Backstage view, then click Options.
2. A dialog box will appear. Select Proofing, then check the box next to Hide spelling errors in this document only and Hide grammar errors in this document only, then click OK.

   

3. The lines in the document will be hidden.

Challenge!

1. Open our practice document. If you already downloaded our practice document in order to follow along with the lesson, be sure to download a fresh copy by clicking the link in this step.
2. Run a Spelling & Grammar check.
3. Ignore the spelling of names like Marcom.
4. Correct all other spelling and grammar mistakes.
5. When you’re finished, your document should look like this:

   

/en/word2016/track-changes-and-comments/content/

Microsoft Word is an indisputable leader among text processing applications. Whether you are using Windows or Mac, Microsoft 365 is an essential package for creating documents. However, Word can create some problems that can easily annoy you. Spelling and grammar checker not working issue is one of the problems many users face when using Microsoft Word. In this article, let us explain how to fox this issue and write error free content like a pro.

Earlier Word versions used to check two things – one is spelling and other is grammar. Word used to underline spelling errors with red wavy line and grammar errors with green wavy line. However, the new AI powered Editor interface has slew of checks like clarity, conciseness, formality, etc. including similarly checker in addition to spelling and grammar checks.

However, sometimes Word will not highlight the spelling / grammar checks making you crazy. You will not find any red or green lines even though the document has misspelled words and the Editor will also show you 100% perfect without detecting the errors.

Here are some of the suggestions that you can try to fix the spelling and grammar checker in Microsoft Word.

Fix Spelling and Grammar Checker in Word

Let us explain the available options primarily for Microsoft 365 for Windows. We have mentioned the applicable cases for Mac version since features like repairing Word are only available for Windows.

1. Check Dictionary Language

Proofing tools in Word uses the language set in the dictionary for checking errors. If the document language is different than your dictionary language, you will see all the words are underlined with red or green wavy line. You can simply check the status bar in Word to confirm the language. Click on the language in status bar to change to English or the document’s language to remove all the red/green underlines.

In addition, make sure the option “Do not check spelling or grammar” is not checked. Otherwise, Word will ignore the spelling and grammar errors leading to confusion that you might think it is not working. If the document language is not installed, Word will suggest installing the proofing language for checking spelling and grammar. You can opt to download and install the required language pack for proofing.

Good part is that this dictionary language check from the status bar option is available in Word app comes with Microsoft 365 subscription in Mac also.

2. Check Proofing Options

Word by default will check your document in the background while you type and suggest the spelling and grammar errors. If you have changed the default behavior, it will result in not showing any red or green lines while you type. In Windows, open “Word Options” dialog box  by going to “File > Options” menu in Word app. When you are in “Word Options”, go to “Proofing” section and check the followings:

• Auto Correction – if Word is not capitalizing the first word and correct other suggestions automatically, then click on “AutoCorrect Options…” button. Check your settings and make sure everything is fine as per your need.
• Spelling Correction – by default Word ignores the words in capital, containing numbers and mark repeat words. You can check these options are set correctly in this section.
• Spelling and grammar checking – this is the main section that you might have changed. Make sure to enable “Check spelling as you type” and “Make grammar errors as you type” options. This will enable Word to show red and green underlines instantly after you type the words.
• Exceptions – under this section make sure the options “Hide spelling errors in this document only” and “Hide grammar errors in this document only” options. Ensure to check this especially when you have received the document from someone else. The author of the document might have set these options mistakenly or for different purposes.

In addition, check the proofing language under “Language” tab from the sidebar and make sure you have the required language installed for doing spelling and grammar check.

In Mac, you can check these settings under “Spelling & Grammar” section by going to “Word > Preferences…” menu.

Note: Changing settings may affect other Office applications like Outlook. Therefore, make sure to change the options with care.

3. Disable Add-ins

There are large number third-party add-ins available for Word Windows version. These add-ins can easily create problems with the default spelling and grammar checker. When you are in “Word Options” section, go to “Add-ins” tab. Select the type of add-ins from “Manage” dropdown box and click “Go…” button. Simply, disable the add-ins by unchecking the box. Now, check the problem is fixed and spelling checker is working. If yes, you can enable the add-ins one by one to find the actual one causing the problem.

4. Check in Safe Mode

Though the above method works to find the problematic add-in, it may take long time. The alternate option is to open Word in a safe mode which will automatically disable all installed add-ins.

• Press “Win + R” to open Run command prompt.
• Type winword / safe and press “OK” button.
• This will open Word in Safe mode and check the spelling checker is working.

If it is working, you can follow the above explained method to find and disable the add-in that causes the problem.

5. Repair Microsoft Word

If none of the above methods work and you also feel Word is not working properly on your computer, then you can use repair option to fix all problems in your installation. However, if you have Microsoft 365 subscription, this will repair the entire Office installation that includes other Office apps.

• Press “Win + I” keys to open Windows Settings app.
• Go to “Apps” section and click on “Apps & features” tab.
• Here you will find all installed apps in your computer. Search for 365 or Word to find the Office installation.
• Click on the three dots vertical icon and select “Modify” option.

• This will open Office Repair wizard. First select “Quick Check” and click on the “Repair” button to start repairing the installation. If this did not fix the issue, then try “Online Repair” and follow the instructions to repair your Office applications.