What is word size in computer

Consider the following:

CPU (processor), RAM (main memory), I/O devices (mouse, keyboard, printer), Bus (data transfer component).

How would you like these computer parts to communicate and transfer data?
you definitely need a fixed size of bits to be considered a single unit of data.

For that, Computer scientists agreed to standardize this unit to be 32 bits or 64 bits (depending on the manufacturer choice).

They gave this unit a name and called it a Word.

So a Word is nothing but a unit of data (bunch of bits (signal charges of zeros and ones)) that moves around from a computer component to another.

For instance buses are built with 32 bits (4 bytes) and some with 64 bits (8 bytes). Likewise with the CPU (hardware) and operating systems (software) are built with either 32 bits or 64 bits.

It just happened to be the standard unit named Word and sized 32 bits or 64 bits.

Ps: Word is one of the many data size units that move around inside the computer, different computer components use different sizes to transport data (signals charges that represent zeros and ones), for instance RAM can use size of 64 bits while Buses can use 32 bits. Hardware designers design the architecture of components taking into account these size differences to either implement Word size of 32 bits on only CPU but 64 bits on RAM, or implement the same size on all components, …etc. Word size used to be 8 bits (1 byte), but nowadays the most comment unit size is 64 bits on most computer components such as CPU or RAM, or Bus, …etc.

From Wikipedia, the free encyclopedia

In computing, a word is the natural unit of data used by a particular processor design. A word is a fixed-sized datum handled as a unit by the instruction set or the hardware of the processor. The number of bits or digits^[a] in a word (the word size, word width, or word length) is an important characteristic of any specific processor design or computer architecture.

The size of a word is reflected in many aspects of a computer’s structure and operation; the majority of the registers in a processor are usually word-sized and the largest datum that can be transferred to and from the working memory in a single operation is a word in many (not all) architectures. The largest possible address size, used to designate a location in memory, is typically a hardware word (here, «hardware word» means the full-sized natural word of the processor, as opposed to any other definition used).

Documentation for older computers with fixed word size commonly states memory sizes in words rather than bytes or characters. The documentation sometimes uses metric prefixes correctly, sometimes with rounding, e.g., 65 kilowords (KW) meaning for 65536 words, and sometimes uses them incorrectly, with kilowords (KW) meaning 1024 words (2¹⁰) and megawords (MW) meaning 1,048,576 words (2²⁰). With standardization on 8-bit bytes and byte addressability, stating memory sizes in bytes, kilobytes, and megabytes with powers of 1024 rather than 1000 has become the norm, although there is some use of the IEC binary prefixes.

Several of the earliest computers (and a few modern as well) use binary-coded decimal rather than plain binary, typically having a word size of 10 or 12 decimal digits, and some early decimal computers have no fixed word length at all. Early binary systems tended to use word lengths that were some multiple of 6-bits, with the 36-bit word being especially common on mainframe computers. The introduction of ASCII led to the move to systems with word lengths that were a multiple of 8-bits, with 16-bit machines being popular in the 1970s before the move to modern processors with 32 or 64 bits.^[1] Special-purpose designs like digital signal processors, may have any word length from 4 to 80 bits.^[1]

The size of a word can sometimes differ from the expected due to backward compatibility with earlier computers. If multiple compatible variations or a family of processors share a common architecture and instruction set but differ in their word sizes, their documentation and software may become notationally complex to accommodate the difference (see Size families below).

Uses of words[edit]

Depending on how a computer is organized, word-size units may be used for:

Fixed-point numbers

Holders for fixed point, usually integer, numerical values may be available in one or in several different sizes, but one of the sizes available will almost always be the word. The other sizes, if any, are likely to be multiples or fractions of the word size. The smaller sizes are normally used only for efficient use of memory; when loaded into the processor, their values usually go into a larger, word sized holder.

Floating-point numbers

Holders for floating-point numerical values are typically either a word or a multiple of a word.

Addresses

Holders for memory addresses must be of a size capable of expressing the needed range of values but not be excessively large, so often the size used is the word though it can also be a multiple or fraction of the word size.

Registers

Processor registers are designed with a size appropriate for the type of data they hold, e.g. integers, floating-point numbers, or addresses. Many computer architectures use general-purpose registers that are capable of storing data in multiple representations.

Memory–processor transfer

When the processor reads from the memory subsystem into a register or writes a register’s value to memory, the amount of data transferred is often a word. Historically, this amount of bits which could be transferred in one cycle was also called a catena in some environments (such as the Bull GAMMA 60 [fr]).^[2][3] In simple memory subsystems, the word is transferred over the memory data bus, which typically has a width of a word or half-word. In memory subsystems that use caches, the word-sized transfer is the one between the processor and the first level of cache; at lower levels of the memory hierarchy larger transfers (which are a multiple of the word size) are normally used.

Unit of address resolution

In a given architecture, successive address values designate successive units of memory; this unit is the unit of address resolution. In most computers, the unit is either a character (e.g. a byte) or a word. (A few computers have used bit resolution.) If the unit is a word, then a larger amount of memory can be accessed using an address of a given size at the cost of added complexity to access individual characters. On the other hand, if the unit is a byte, then individual characters can be addressed (i.e. selected during the memory operation).

Instructions

Machine instructions are normally the size of the architecture’s word, such as in RISC architectures, or a multiple of the «char» size that is a fraction of it. This is a natural choice since instructions and data usually share the same memory subsystem. In Harvard architectures the word sizes of instructions and data need not be related, as instructions and data are stored in different memories; for example, the processor in the 1ESS electronic telephone switch has 37-bit instructions and 23-bit data words.

Word size choice[edit]

When a computer architecture is designed, the choice of a word size is of substantial importance. There are design considerations which encourage particular bit-group sizes for particular uses (e.g. for addresses), and these considerations point to different sizes for different uses. However, considerations of economy in design strongly push for one size, or a very few sizes related by multiples or fractions (submultiples) to a primary size. That preferred size becomes the word size of the architecture.

Character size was in the past (pre-variable-sized character encoding) one of the influences on unit of address resolution and the choice of word size. Before the mid-1960s, characters were most often stored in six bits; this allowed no more than 64 characters, so the alphabet was limited to upper case. Since it is efficient in time and space to have the word size be a multiple of the character size, word sizes in this period were usually multiples of 6 bits (in binary machines). A common choice then was the 36-bit word, which is also a good size for the numeric properties of a floating point format.

After the introduction of the IBM System/360 design, which uses eight-bit characters and supports lower-case letters, the standard size of a character (or more accurately, a byte) becomes eight bits. Word sizes thereafter are naturally multiples of eight bits, with 16, 32, and 64 bits being commonly used.

Variable-word architectures[edit]

Early machine designs included some that used what is often termed a variable word length. In this type of organization, an operand has no fixed length. Depending on the machine and the instruction, the length might be denoted by a count field, by a delimiting character, or by an additional bit called, e.g., flag, or word mark. Such machines often use binary-coded decimal in 4-bit digits, or in 6-bit characters, for numbers. This class of machines includes the IBM 702, IBM 705, IBM 7080, IBM 7010, UNIVAC 1050, IBM 1401, IBM 1620, and RCA 301.

Most of these machines work on one unit of memory at a time and since each instruction or datum is several units long, each instruction takes several cycles just to access memory. These machines are often quite slow because of this. For example, instruction fetches on an IBM 1620 Model I take 8 cycles (160 μs) just to read the 12 digits of the instruction (the Model II reduced this to 6 cycles, or 4 cycles if the instruction did not need both address fields). Instruction execution takes a variable number of cycles, depending on the size of the operands.

Word, bit and byte addressing[edit]

The memory model of an architecture is strongly influenced by the word size. In particular, the resolution of a memory address, that is, the smallest unit that can be designated by an address, has often been chosen to be the word. In this approach, the word-addressable machine approach, address values which differ by one designate adjacent memory words. This is natural in machines which deal almost always in word (or multiple-word) units, and has the advantage of allowing instructions to use minimally sized fields to contain addresses, which can permit a smaller instruction size or a larger variety of instructions.

When byte processing is to be a significant part of the workload, it is usually more advantageous to use the byte, rather than the word, as the unit of address resolution. Address values which differ by one designate adjacent bytes in memory. This allows an arbitrary character within a character string to be addressed straightforwardly. A word can still be addressed, but the address to be used requires a few more bits than the word-resolution alternative. The word size needs to be an integer multiple of the character size in this organization. This addressing approach was used in the IBM 360, and has been the most common approach in machines designed since then.

When the workload involves processing fields of different sizes, it can be advantageous to address to the bit. Machines with bit addressing may have some instructions that use a programmer-defined byte size and other instructions that operate on fixed data sizes. As an example, on the IBM 7030^[4] («Stretch»), a floating point instruction can only address words while an integer arithmetic instruction can specify a field length of 1-64 bits, a byte size of 1-8 bits and an accumulator offset of 0-127 bits.

In a byte-addressable machine with storage-to-storage (SS) instructions, there are typically move instructions to copy one or multiple bytes from one arbitrary location to another. In a byte-oriented (byte-addressable) machine without SS instructions, moving a single byte from one arbitrary location to another is typically:

1. LOAD the source byte
2. STORE the result back in the target byte

Individual bytes can be accessed on a word-oriented machine in one of two ways. Bytes can be manipulated by a combination of shift and mask operations in registers. Moving a single byte from one arbitrary location to another may require the equivalent of the following:

1. LOAD the word containing the source byte
2. SHIFT the source word to align the desired byte to the correct position in the target word
3. AND the source word with a mask to zero out all but the desired bits
4. LOAD the word containing the target byte
5. AND the target word with a mask to zero out the target byte
6. OR the registers containing the source and target words to insert the source byte
7. STORE the result back in the target location

Alternatively many word-oriented machines implement byte operations with instructions using special byte pointers in registers or memory. For example, the PDP-10 byte pointer contained the size of the byte in bits (allowing different-sized bytes to be accessed), the bit position of the byte within the word, and the word address of the data. Instructions could automatically adjust the pointer to the next byte on, for example, load and deposit (store) operations.

Powers of two[edit]

Different amounts of memory are used to store data values with different degrees of precision. The commonly used sizes are usually a power of two multiple of the unit of address resolution (byte or word). Converting the index of an item in an array into the memory address offset of the item then requires only a shift operation rather than a multiplication. In some cases this relationship can also avoid the use of division operations. As a result, most modern computer designs have word sizes (and other operand sizes) that are a power of two times the size of a byte.

Size families[edit]

As computer designs have grown more complex, the central importance of a single word size to an architecture has decreased. Although more capable hardware can use a wider variety of sizes of data, market forces exert pressure to maintain backward compatibility while extending processor capability. As a result, what might have been the central word size in a fresh design has to coexist as an alternative size to the original word size in a backward compatible design. The original word size remains available in future designs, forming the basis of a size family.

In the mid-1970s, DEC designed the VAX to be a 32-bit successor of the 16-bit PDP-11. They used word for a 16-bit quantity, while longword referred to a 32-bit quantity; this terminology is the same as the terminology used for the PDP-11. This was in contrast to earlier machines, where the natural unit of addressing memory would be called a word, while a quantity that is one half a word would be called a halfword. In fitting with this scheme, a VAX quadword is 64 bits. They continued this 16-bit word/32-bit longword/64-bit quadword terminology with the 64-bit Alpha.

Another example is the x86 family, of which processors of three different word lengths (16-bit, later 32- and 64-bit) have been released, while word continues to designate a 16-bit quantity. As software is routinely ported from one word-length to the next, some APIs and documentation define or refer to an older (and thus shorter) word-length than the full word length on the CPU that software may be compiled for. Also, similar to how bytes are used for small numbers in many programs, a shorter word (16 or 32 bits) may be used in contexts where the range of a wider word is not needed (especially where this can save considerable stack space or cache memory space). For example, Microsoft’s Windows API maintains the programming language definition of WORD as 16 bits, despite the fact that the API may be used on a 32- or 64-bit x86 processor, where the standard word size would be 32 or 64 bits, respectively. Data structures containing such different sized words refer to them as:

• WORD (16 bits/2 bytes)
• DWORD (32 bits/4 bytes)
• QWORD (64 bits/8 bytes)

A similar phenomenon has developed in Intel’s x86 assembly language – because of the support for various sizes (and backward compatibility) in the instruction set, some instruction mnemonics carry «d» or «q» identifiers denoting «double-«, «quad-» or «double-quad-«, which are in terms of the architecture’s original 16-bit word size.

An example with a different word size is the IBM System/360 family. In the System/360 architecture, System/370 architecture and System/390 architecture, there are 8-bit bytes, 16-bit halfwords, 32-bit words and 64-bit doublewords. The z/Architecture, which is the 64-bit member of that architecture family, continues to refer to 16-bit halfwords, 32-bit words, and 64-bit doublewords, and additionally features 128-bit quadwords.

In general, new processors must use the same data word lengths and virtual address widths as an older processor to have binary compatibility with that older processor.

Often carefully written source code – written with source-code compatibility and software portability in mind – can be recompiled to run on a variety of processors, even ones with different data word lengths or different address widths or both.

Table of word sizes[edit]

^[8][9]

See also[edit]

• Integer (computer science)

Notes[edit]

References[edit]

Word “size” refers to the amount of data a CPU’s internal data registers can hold and process at one time. Modern desktop computers have 64-bit words. Computers embedded in appliances and consumer products have word sizes of 8, 16 or 32 bits. See bit and byte.

What is the word size of a computer measured in?

“Word size” refers to the number of bits processed by a computer’s CPU in one go (these days, typically 32 bits or 64 bits).

What is the size of each word?

A byte is eight bits, a word is 2 bytes (16 bits), a doubleword is 4 bytes (32 bits), and a quadword is 8 bytes (64 bits).

Is a word 16 or 32 bits?

In x86 assembly language WORD , DOUBLEWORD ( DWORD ) and QUADWORD ( QWORD ) are used for 2, 4 and 8 byte sizes, regardless of the machine word size. A word is typically the “native” data size of the CPU. That is, on a 16-bit CPU, a word is 16 bits, on a 32-bit CPU, it’s 32 and so on.

What is a word in computers?

In computer architecture, a word is a unit of data of a defined bit length that can be addressed and moved between storage and the computer processor.A word can contain a computer instruction, a storage address, or application data that is to be manipulated (for example, added to the data in another word space).

What is the word size of a 64 bit computer?

Each set of 8 bits is called a byte. Two bytes together as in a 16 bit machine make up a word , 32 bit machines are 4 bytes which is a double word and 64 bit machines are 8 bytes which is a quad word.

Why is a computer word size important?

Explanation: The word size of a computer generally indicates the largest integer it can process in a single instruction, and the size of a memory address, which is usually, but not necessarily the same as the integer size. The main indication of the word size is how much memory the processor can address.

How do you find a word size?

That being said, on Windows with Intel processors, the nominal word size will be either 32 or 64 bits and you can easily figure this out:

1. if your program is compiled for 32-bits, then the nominal word size is 32-bits.
2. if you have compiled a 64-bit program then then the nominal word size is 64-bits.

What is digital word?

1 : relating to or using calculation directly with digits rather than through measurable physical quantities. 2 : of or relating to data in the form of numerical digits digital images digital broadcasting. 3 : providing displayed or recorded information in numerical digits from an automatic device a digital watch.

What do you mean by 32 bit or 64-bit word size?

Traditionally the term “word” refers to the size of the processor’s registers and main data path. By that definition a “word” would be 32 bit on your 32-bit system and 64-bit on your 64-bit system.

What is 64-bit system?

An operating system that is designed to work in a computer that processes 64 bits at a time.A 64-bit operating system will not work in a 32-bit computer, but a 32-bit operating system will run in a 64-bit computer. See 64-bit computing.

What are the speed and word size of the CPU?

(1) The word size for a computer is the number of bits that the central processing unit (CPU) of a particular computer can handle at one time. These word sizes range from a nibble to more than 128 bits. (2) Word size = 16 bits (or two bytes).

A word is an integer number of bytes for example, one, two, four, or eight. When someone talks about the “n-bits” of a machine, they are generally talking about the machine’s word size. For example, when people say the Pentium is a 32-bit chip, they are referring to its word size, which is 32 bits, or four bytes.

What is word size in RAM?

Traditionally, a “word” in computer architectures was generally the smallest addressable unit of memory. And traditionally this has been the same as the machine’s general purpose register size.

How much is a word size?

Word “size” refers to the amount of data a CPU’s internal data registers can hold and process at one time. Modern desktop computers have 64-bit words. Computers embedded in appliances and consumer products have word sizes of 8, 16 or 32 bits.

How do I know 64-bit or 32-bit?

Press and hold the Windows key and the Pause key. In the System window, next to System type, it lists 32-bit Operating System for a 32-bit version of Windows, and 64-bit Operating System if you’re running the 64-bit version.

What is word size of a processor?

A word is a fixed-sized piece of data handled as a unit by the instruction set or the hardware of the processor.Modern processors, including embedded systems, usually have a word size of 8, 16, 24, 32, or 64 bits, while modern general purpose computers usually use 32 or 64 bits.

What is the effect of word size on processor speed?

On the x86 processors (so this is what happens on all modern PC and Mac), for historical reasons, the 64-bit mode does not come only with 64-bit registers; it also offers twice as many registers to the application, and this helps performance by a fair bit.

What are the 7 types of computers?

Types of computers

• Supercomputer.
• Mainframe.
• Server Computer.
• Workstation Computer.
• Personal Computer or PC.
• Microcontroller.
• Smartphone. 8 References.

What is the word size of 32 GB RAM?

A 32bit CPU will have a 32bit word, a 64bit CPU will deal with 64bit words.

Is digitally a real word?

Yes, digitally is in the scrabble dictionary.

The word size of a computer generally indicates the largest integer it can process in a single instruction, and the size of a memory address, which is usually, but not necessarily the same as the integer size. The main indication of the word size is how much memory the processor can address.

How large is a word on a 64 bit computer?

Bits and Bytes They started as 8-bit machines and now are up to 64-bit Nintendos. Each set of 8 bits is called a byte. Two bytes together as in a 16 bit machine make up a word , 32 bit machines are 4 bytes which is a double word and 64 bit machines are 8 bytes which is a quad word.

What is Computer size?

(1) The word size for a computer is the number of bits that the central processing unit (CPU) of a particular computer can handle at one time. These word sizes range from a nibble to more than 128 bits. (2) Word size = 16 bits (or two bytes).

What does the word size mean?

1. Size, volume, mass, bulk are terms referring to the extent or dimensions of that which has magnitude and occupies space. Size is the general word: of great size; small in size. Volume often applies to something that has no fixed shape: Smoke has volume.

What is an example of size?

Size is a measurement or amount of a person or thing. An example of size is a medium dress. An example of size is a four feet tall, two feet wide dresser. An example of size is a six feet tall man with a 36-inch waist.

How do I check my memory bandwidth?

The theoretical maximum memory bandwidth for Intel Core X-Series Processors can be calculated by multiplying the memory frequency (one half since double data rate x 2), multiplied by the number of the bytes of width, and multiplied by the number of the channels supported for the processor.

What is data width of a memory?

The memory width specifies the data width of the memory module interface in bits. For example, 64 would indicate a 64-bit data width, as is found on non-ECC DIMMs common in SDR and DDR1–4 families of RAM. The memory depth is the total memory capacity in bits divided by the non-parity memory width.

What is CPU memory bandwidth?

Memory bandwidth is the rate at which data can be read from or stored into a semiconductor memory by a processor. Memory bandwidth is usually expressed in units of bytes/second, though this can vary for systems with natural data sizes that are not a multiple of the commonly used 8-bit bytes.

How do I increase my memory bandwidth?

Make memory wider (assume monolithic memory)

1. Sending one address, yields transfer of more than one word if bus width allows it (e.g., Alpha 21064 has L2, DRAM, and memory bus all 256 bits wide)
2. But less modularity (buy bigger increments of memory)

What is max bandwidth?

Bandwidth describes the maximum data transfer rate of a network or Internet connection. It measures how much data can be sent over a specific connection in a given amount of time. For example, a gigabit Ethernet connection has a bandwidth of 1,000 Mbps (125 megabytes per second).

Is bandwidth a speed?

A link in a network is determined by two factors, bandwidth and speed. These are usually the same but not always. Definition: Speed is bit rate of the circuit while bandwidth is the amount of “speed” available for use.

What is a good bandwidth for Internet?

What is a good internet speed? A good internet speed is at or above 25 Mbps. These speeds will support most online activity, such as HD streaming, online gaming, web browsing and downloading music.

Is a word 4 bytes?

A byte is eight bits, a word is 2 bytes (16 bits), a doubleword is 4 bytes (32 bits), and a quadword is 8 bytes (64 bits).

What are the three memory systems?

Key Points

• The three main stages of memory are encoding, storage, and retrieval.
• The three main forms of memory storage are sensory memory, short-term memory, and long-term memory.

What Does Word Size Mean?

In computing, word size refers to the maximum number of bits that a CPU can process at a time. A word is a fixed-sized piece of data which is dictated by the processor hardware architecture; fixed in a sense that it is the maximum size that the processor is always using, yet variable in the sense that word sizes vary amongst processor architectures, most notably because of generation and the state of technology.

Techopedia Explains Word Size

Word size has varied in size and even in meaning throughout the history of the computer. Originally, “word” meant 16 bits, as that was the maximum possible value at the time. But as processor hardware technology progressed and computers were able to handle larger and larger amounts of data, word simply became the maximum possible number of bits that the processor in question can process. So word size could be as low as 4 bits or as high as 64 bits, depending on what a particular processor can handle.

Word size is used for a number of concepts, all relating to processing. It is used in any of the following:

• Addresses — The address must be able to represent the full range possible, so it uses a full word or a multiple of it.
• Fixed-point numbers — Integers are available in different sizes, but usually it takes the size of the full word supported by the processor.
• Floating-point numbers — Holders for floating-point numbers typically use the full word size length or multiples of it.
• Registers — The size of the register depends on the kind of register and what its purpose is, but a general-purpose register usually uses the maximum word size capability of the processor.
• Instructions — Instruction sets for processors are often coded in full word size.

Word “size” refers to the amount of data a CPU’s internal data registers can hold and process at one time. Modern desktop computers have 64-bit words. Computers embedded in appliances and consumer products have word sizes of 8, 16 or 32 bits.

How does word size affect CPU?

The bottom line: larger word lengths means we can process more data faster in the processor, which is greatly needed as we advance computing technology. This is why so many instruction set extensions (MMX, SSE, etc…) have been created: to process larger amounts of data in less amount of time.

What is meant by word size ‘?

What Does Word Size Mean? In computing, word size refers to the maximum number of bits that a CPU can process at a time.

What are the words of a CPU?

A word is a fixed-sized piece of data processed as a unit by the processor. the largest system bus size (the largest piece of data that can be transferred to and from the working memory) the largest address size.

What is 32 bit word size?

The word size is typically the register size, and on 32-bits the word size is 32. On 64 it is 64. This may confuse some new programmers who see WORD size in languages as 16-bit. At the time, the CPUs were 16 bits, so when computers moved to 32-bit processors (and beyond) the WORD size data type was still 16.

Why is word size important?

Explanation: The word size of a computer generally indicates the largest integer it can process in a single instruction, and the size of a memory address, which is usually, but not necessarily the same as the integer size. The main indication of the word size is how much memory the processor can address.

What are the advantages and disadvantages of increasing word size?

Therefore, increasing word size increases the capability to process larger units of data. The disadvantages of increased word size are increased CPU, bus, and memory complexity and, therefore, cost. This complexity increases at a faster rate than the increase in word size.

What is a word in computers?

In computer architecture, a word is a unit of data of a defined bit length that can be addressed and moved between storage and the computer processor. A word can contain a computer instruction, a storage address, or application data that is to be manipulated (for example, added to the data in another word space).

Data structures containing such different sized words refer to them as WORD (16 bits/2 bytes), DWORD (32 bits/4 bytes) and QWORD (64 bits/8 bytes) respectively.

What is the word size of a 64 bit computer?

Each set of 8 bits is called a byte. Two bytes together as in a 16 bit machine make up a word , 32 bit machines are 4 bytes which is a double word and 64 bit machines are 8 bytes which is a quad word.

What is CPU small answer?

central processing unit (CPU), principal part of any digital computer system, generally composed of the main memory, control unit, and arithmetic-logic unit. In modern computers, the CPU is contained on an integrated circuit chip called a microprocessor.

What is CPU example?

The definition of CPU stands for central processing unit, which is the control center of a computer. An example of a CPU is the part of a computer in control of all its functions. The CPU often is contained on a single silicon chip, known as a microprocessor.

What is CPU English?

abbreviation Computers. central processing unit: the key component of a computer system, which contains the circuitry necessary to interpret and execute program instructions.

How do you find a word size?

That being said, on Windows with Intel processors, the nominal word size will be either 32 or 64 bits and you can easily figure this out: if your program is compiled for 32-bits, then the nominal word size is 32-bits. if you have compiled a 64-bit program then then the nominal word size is 64-bits.

Is a word always 2 bytes?

A byte is eight bits, a word is 2 bytes (16 bits), a doubleword is 4 bytes (32 bits), and a quadword is 8 bytes (64 bits).

What is word size in x86?

In the x86 PC (Intel, AMD, etc.), although the architecture has long supported 32-bit and 64-bit registers, its native word size stems back to its 16-bit origins, and a “single” word is 16 bits. A “double” word is 32 bits. See 32-bit computer and 64-bit computer.

What is word size how size effect on processing speed?

1. Theoretically, a bigger word size makes code a bit slower. The reason is that in a 64-bit architecture, pointers are 64-bit words, hence data structures which are full of pointers (lists, trees, hash tables) tend to use more RAM than what equivalent code does on a 32-bit architecture.

What is the difference between bus size and word size?

The data bus is bi-directional. Word size describes the width of the data bus. At the moment new processors will usually have a word size of 8 bytes (64 bits), allowing for 64 bits to be transferred during each cycle.

How does pipelining improve CPU efficiency?

Pipelining is a technique used to improve the execution throughput of a CPU by using the processor resources in a more efficient manner. The basic idea is to split the processor instructions into a series of small independent stages. Each stage is designed to perform a certain part of the instruction.

What part of the CPU performs arithmetic calculations?

The arithmetic logic unit (ALU) performs mathematical calculations; it is the part that computes. The ALU is fed instructions by the control unit, which acts as a traffic cop, sending instructions to the ALU.

What characteristics of the CPU and of the system bus should be balanced to achieve maximum system performance?

What characteristics of the CPU and of the system bus should be balanced to achieve maximum system performance? The width of the data bus should equal or exceed CPU word size. The bus clock rate should match the CPU clock rate, though this is difficult or impossible to achieve.

How many bits is a 4 letter word?

Furthermore, a quad-word, or QWORD, is 2 DWORDs, same as 4 WORDs, 8 characters, or 64 bits.

Is a byte 4 or 8 bits?

The byte is a unit of digital information that most commonly consists of eight bits. Historically, the byte was the number of bits used to encode a single character of text in a computer and for this reason it is the smallest addressable unit of memory in many computer architectures.

What is 16 bits called?

BYTE – 8 bits, unsigned. WORD – 16 bits, unsigned. DWORD – 32 bits, unsigned.

A word is a set number of bits managed as a unit.

Hardware Word

A hardware word is the group of bits normally managed by a processor. The word size is a distinguishing feature of a processor, and is typically a power-of-two multiple of eight bits (8, 16, 32, or 64 bits), although some rare or early processors used different word sizes.

The word size is usually associated with the size of general-purpose registers and the amount of data read from or written to memory at one time. Most modern processors can read/write alternate word sizes (for example, a «64-bit» x86_64 system can also read/write 32, 16, and 8 bit values to/from memory, and 64-bit registers can be accessed as 32, 16, or 8-bit subsets). Additionally, many modern systems use a different memory word size than CPU word size (for example, a «64-bit» system may be built to read/write memory 128 bits at a time), but this is transparent to the programmer and user.

Common Names for Various Word Sizes

Bit

A bit is a single binary digit, a value that can take one of two states. These states may be referred to as:

• 1 or 0
• True or False
• On or Off (electrically)
• Positive or Negative charge, or Forward or Reverse current flow (electrically — differential signalling)

Byte

A byte is a collection of eight bits. It is a convenient size for use with many small character sets such as ASCII, ISO8859, and EBCDIC, and can also be used with the UTF-8 encoding of Unicode. It is often viewed as the smallest hardware word size that makes sense for general-purpose computing.

Most computers with larger hardware word sizes continue to rank memory, storage, and data sizes in bytes (or prefixed multiples of bytes) for comparability. For example, an x86_64 system will be advertised as having «16 gigabytes» of memory instead of «2 gigawords».

Octet

Another name for byte, commonly used in telecommunication standards and in French.

Nibble

A nibble (or nybble) is a half-byte, corresponding to one hexadecimal or BCD digit.

Half word, Single word, Double word, Quad word

The terms half word (or halfword or half-word), single word, double word, and quad word are often used in contemporary computing to refer to common word sizes relative to a 32-bit base word size:

• half word = 16 bits
• single word = 32 bits
• double word = 64 bits
• quad word = 128 bits

This terminology can be seen, for example, in the lane naming conventions for AArch64 SIMD (where v0.8h refers to the 128-bit vector register 0 divided in eight half word lanes) and x86_86 instruction suffixes (MOVQ to move a quad word).

The 32-bit base size is reflective of the 32-bit standard integer size used in the predominant LP64 (and less common ILP32) programming models.

Read this article. As it explains:

«In computing, a word is the natural unit of data used by a particular processor design. A word is a fixed-sized piece of data handled as a unit by the instruction set or the hardware of the processor. The number of bits in a word (the word size, word width, or word length) is an important characteristic of any specific processor design or computer architecture.»

In computing, a word is the natural unit of data used by a particular processor design. A word is a fixed-sized piece of data handled as a unit by the instruction set or the hardware of the processor. The number of bits in a word (the word size, word width, or word length) is an important characteristic of any specific processor design or computer architecture.

The size of a word is reflected in many aspects of a computer’s structure and operation; the majority of the registers in a processor are usually word sized and the largest piece of data that can be transferred to and from the working memory in a single operation is a word in many (not all) architectures. The largest possible address size, used to designate a location in memory, is typically a hardware word (here, «hardware word» means the full-sized natural word of the processor, as opposed to any other definition used).

Modern processors, including embedded systems, usually have a word size of 8, 16, 24, 32, or 64 bits, while modern general purpose computers usually use 32 or 64 bits. Special purpose digital processors, such as DSPs for instance, may use other sizes, and many other sizes have been used historically, including 9, 12, 18, 24, 26, 36, 39, 40, 48, and 60 bits. The slab is an example of a system with an earlier word size. Several of the earliest computers (and a few modern as well) used BCD rather than plain binary, typically having a word size of 10 or 12 decimal digits, and some early decimal computers had no fixed word length at all.

The size of a word can sometimes differ from the expected due to backward compatibility with earlier computers. If multiple compatible variations or a family of processors share a common architecture and instruction set but differ in their word sizes, their documentation and software may become notationally complex to accommodate the difference (see Size families below).

Uses of words

Depending on how a computer is organized, word-size units may be used for:

Fixed point numbers

Holders for fixed point, usually integer, numerical values may be available in one or in several different sizes, but one of the sizes available will almost always be the word. The other sizes, if any, are likely to be multiples or fractions of the word size. The smaller sizes are normally used only for efficient use of memory; when loaded into the processor, their values usually go into a larger, word sized holder.

Floating point numbers

Holders for floating point numerical values are typically either a word or a multiple of a word.

Addresses

Holders for memory addresses must be of a size capable of expressing the needed range of values but not be excessively large, so often the size used is the word though it can also be a multiple or fraction of the word size.

Registers

Processor registers are designed with a size appropriate for the type of data they hold, e.g. integers, floating point numbers or addresses. Many computer architectures use «general purpose registers» that can hold any of several types of data, these registers must be sized to hold the largest of the types, historically this is the word size of the architecture though increasingly special purpose, larger, registers have been added to deal with newer types.

Memory-processor transfer

When the processor reads from the memory subsystem into a register or writes a register’s value to memory, the amount of data transferred is often a word. Historically, this amount of bits which could be transferred in one cycle was also called a catena in some environments (such as the Bull GAMMA 60 (fr)). In simple memory subsystems, the word is transferred over the memory data bus, which typically has a width of a word or half-word. In memory subsystems that use caches, the word-sized transfer is the one between the processor and the first level of cache; at lower levels of the memory hierarchy larger transfers (which are a multiple of the word size) are normally used.

Unit of address resolution

In a given architecture, successive address values designate successive units of memory; this unit is the unit of address resolution. In most computers, the unit is either a character (e.g. a byte) or a word. (A few computers have used bit resolution.) If the unit is a word, then a larger amount of memory can be accessed using an address of a given size at the cost of added complexity to access individual characters. On the other hand, if the unit is a byte, then individual characters can be addressed (i.e. selected during the memory operation).

Instructions

Machine instructions are normally the size of the architecture’s word, such as in RISC architectures, or a multiple of the «char» size that is a fraction of it. This is a natural choice since instructions and data usually share the same memory subsystem. In Harvard architectures the word sizes of instructions and data need not be related, as instructions and data are stored in different memories; for example, the processor in the 1ESS electronic telephone switch had 37-bit instructions and 23-bit data words.

Word size choice

When a computer architecture is designed, the choice of a word size is of substantial importance. There are design considerations which encourage particular bit-group sizes for particular uses (e.g. for addresses), and these considerations point to different sizes for different uses. However, considerations of economy in design strongly push for one size, or a very few sizes related by multiples or fractions (submultiples) to a primary size. That preferred size becomes the word size of the architecture.

Character size was in the past (pre-variable-sized character encoding) one of the influences on unit of address resolution and the choice of word size. Before the mid-1960s, characters were most often stored in six bits; this allowed no more than 64 characters, so the alphabet was limited to upper case. Since it is efficient in time and space to have the word size be a multiple of the character size, word sizes in this period were usually multiples of 6 bits (in binary machines). A common choice then was the 36-bit word, which is also a good size for the numeric properties of a floating point format.

After the introduction of the IBM System/360 design, which used eight-bit characters and supported lower-case letters, the standard size of a character (or more accurately, a byte) became eight bits. Word sizes thereafter were naturally multiples of eight bits, with 16, 32, and 64 bits being commonly used.

Variable word architectures

Early machine designs included some that used what is often termed a variable word length. In this type of organization, a numeric operand had no fixed length but rather its end was detected when a character with a special marking, often called word mark, was encountered. Such machines often used binary coded decimal for numbers. This class of machines included the IBM 702, IBM 705, IBM 7080, IBM 7010, UNIVAC 1050, IBM 1401, and IBM 1620.

Most of these machines work on one unit of memory at a time and since each instruction or datum is several units long, each instruction takes several cycles just to access memory. These machines are often quite slow because of this. For example, instruction fetches on an IBM 1620 Model I take 8 cycles just to read the 12 digits of the instruction (the Model II reduced this to 6 cycles, or 4 cycles if the instruction did not need both address fields). Instruction execution took a completely variable number of cycles, depending on the size of the operands.

Word and byte addressing

The memory model of an architecture is strongly influenced by the word size. In particular, the resolution of a memory address, that is, the smallest unit that can be designated by an address, has often been chosen to be the word. In this approach, address values which differ by one designate adjacent memory words. This is natural in machines which deal almost always in word (or multiple-word) units, and has the advantage of allowing instructions to use minimally sized fields to contain addresses, which can permit a smaller instruction size or a larger variety of instructions.

When byte processing is to be a significant part of the workload, it is usually more advantageous to use the byte, rather than the word, as the unit of address resolution. This allows an arbitrary character within a character string to be addressed straightforwardly. A word can still be addressed, but the address to be used requires a few more bits than the word-resolution alternative. The word size needs to be an integer multiple of the character size in this organization. This addressing approach was used in the IBM 360, and has been the most common approach in machines designed since then.

Individual bytes can be accessed on a word-oriented machine in one of two ways. Bytes can be manipulated by a combination of shift and mask operations in registers. Moving a single byte from one arbitrary location to another may require the equivalent of the following:

• LOAD the word containing the source byte
• SHIFT the source word to align the desired byte to the correct position in the target word
• AND the source word with a mask to zero out all but the desired bits
• LOAD the word containing the target byte
• AND the target word with a mask to zero out the target byte
• OR the registers containing the source and target words to insert the source byte
• STORE the result back in the target location

Alternatively many word-oriented machines implement byte operations with instructions using special byte pointers in registers or memory. For an example the PDP-10 byte pointer contained the size of the byte in bits (allowing different-sized bytes to be accessed), the bit position of the byte within the word, and the word address of the data. Instructions could automatically adjust the pointer to the next byte on, for example, load and deposit (store) operations.

Powers of two

Different amounts of memory are used to store data values with different degrees of precision. The commonly used sizes are usually a power of two multiple of the unit of address resolution (byte or word). Converting the index of an item in an array into the address of the item then requires only a shift operation rather than a multiplication. In some cases this relationship can also avoid the use of division operations. As a result, most modern computer designs have word sizes (and other operand sizes) that are a power of two times the size of a byte.

Size families

As computer designs have grown more complex, the central importance of a single word size to an architecture has decreased. Although more capable hardware can use a wider variety of sizes of data, market forces exert pressure to maintain backward compatibility while extending processor capability. As a result, what might have been the central word size in a fresh design has to coexist as an alternative size to the original word size in a backward compatible design. The original word size remains available in future designs, forming the basis of a size family.

In the mid-1970s, DEC designed the VAX to be a successor of the PDP-11. They used word for a 16-bit quantity, while longword referred to a 32-bit quantity. This was in contrast to earlier machines, where the natural unit of addressing memory would be called a word, while a quantity that is one half a word would be called a halfword. In fitting with this scheme, a VAX quadword is 64 bits.

Another example is the x86 family, of which processors of three different word lengths (16-bit, later 32- and 64-bit) have been released. As software is routinely ported from one word-length to the next, some APIs and documentation define or refer to an older (and thus shorter) word-length than the full word length on the CPU that software may be compiled for. Also, similar to how bytes are used for small numbers in many programs, a shorter word (16 or 32 bits) may be used in contexts where the range of a wider word is not needed (especially where this can save considerable stack space or cache memory space). For example, Microsoft’s Windows API maintains the programming language definition of WORD as 16 bits, despite the fact that the API may be used on a 32- or 64-bit x86 processor, where the standard word size would be 32 or 64 bits, respectively. Data structures containing such different sized words refer to them as WORD (16 bits/2 bytes), DWORD (32 bits/4 bytes) and QWORD (64 bits/8 bytes) respectively. A similar phenomenon has developed in Intel’s x86 assembly language – because of the support for various sizes (and backward compatibility) in the instruction set, some instruction mnemonics carry «d» or «q» identifiers denoting «double-«, «quad-» or «double-quad-«, which are in terms of the architecture’s original 16-bit word size.

In general, new processors must use the same data word lengths and virtual address widths as an older processor to have binary compatibility with that older processor.

Often carefully written source code – written with source code compatibility and software portability in mind – can be recompiled to run on a variety of processors, even ones with different data word lengths or different address widths or both.

Source: Wikipedia, https://en.wikipedia.org/wiki/Word_(computer_architecture)
 This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 License.