Vba excel как выделить диапазон строк

Подскажите как выделить  диапазон строк от a до b
Public a, b As Integer
Sub asd()

  a = Range(«диапазон»).Rows(Range(«диапазон»).Rows.Count).Row
  b= UsedRange.Rows.Count
    Rows(«a:b»).Select
End sub

Почему когда стоят переменные в скобках не выделяет строки, а скажем  Rows(a).Select работает.
a и b находит верно я проверял через msgbox.

Ок, спасибо.
В моем случае будет.
rows(a+1).Resize(b-а).Select

1. 1

   Select one cell on the current worksheet. Let’s say you want to select cell E6 with Visual Basic. You can do this with either of the following options:^[1]
   

   ActiveSheet.Cells(6, 5).Select
   

   ActiveSheet.Range("E6").Select
   

2. 2

   Select one cell on a different worksheet in the same workbook. Let’s say our example cell, E6, is on a sheet called Sheet2. You can use either of the following options to select it:

   Application.Goto ActiveWorkbook.Sheets("Sheet2").Cells(6, 5)
   

   Application.Goto (ActiveWorkbook.Sheets("Sheet2").Range("E6"))
   

   Advertisement

3. 3

   Select one cell on a worksheet in a different workbook. Let’s say you want to select a cell from Sheet1 in a workbook called BOOK2.XLS. Either of these two options should do the trick:

   Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Cells(2,1)
   

   Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Range("A2")
   

4. 4

   Select a cell relative to another cell. You can use VB to select a cell based on its location relative to the active (or a different) cell. Just be sure the cell exists to avoid errors. Here’s how to use :

   • Select the cell three rows below and four columns to the left of the active cell:

     ActiveCell.Offset(3, -4).Select
     

   • Select the cell five rows below and four columns to the right of cell C7:

     ActiveSheet.Cells(7, 3).Offset(5, 4).Select
     

Advertisement

1. 1

   Select a range of cells on the active worksheet. If you wanted to select cells C1:D6 on the current sheet, you can enter any of the following three examples:

   ActiveSheet.Range(Cells(1, 3), Cells(6, 4)).Select
   

   ActiveSheet.Range("C1:D6").Select
   

   ActiveSheet.Range("C1", "D6").Select
   

2. 2

   Select a range from another worksheet in the same workbook. You could use either of these examples to select cells C3:E11 on a sheet called Sheet3:

   Application.Goto ActiveWorkbook.Sheets("Sheet3").Range("C3:E11")
   

   Application.Goto ActiveWorkbook.Sheets("Sheet3").Range("C3", "E11")
   

3. 3

   Select a range of cells from a worksheet in a different workbook. Both of these examples would select cells E12:F12 on Sheet1 of a workbook called BOOK2.XLS:

   Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Range("E12:F12")
   

   Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Range("E12", "F12")
   

4. 4

   Select a named range. If you’ve assigned a name to a range of cells, you’d use the same syntax as steps 4-6, but you’d replace the range address (e.g., «E12», «F12») with the range’s name (e.g., «Sales»). Here are some examples:

   • On the active sheet:

     ActiveSheet.Range("Sales").Select
     

   • Different sheet of same workbook:

     Application.Goto ActiveWorkbook.Sheets("Sheet3").Range("Sales")
     

   • Different workbook:

     Application.Goto Workbooks("BOOK2.XLS").Sheets("Sheet1").Range("Sales")
     

5. 5

   Select a range relative to a named range. The syntax varies depending on the named range’s location and whether you want to adjust the size of the new range.

   • If the range you want to select is the same size as one called Test5 but is shifted four rows down and three columns to the right, you’d use:

     ActiveSheet.Range("Test5").Offset(4, 3).Select
     

   • If the range is on Sheet3 of the same workbook, activate that worksheet first, and then select the range like this:

     Sheets("Sheet3").Activate ActiveSheet.Range("Test").Offset(4, 3).Select
     

6. 6

   Select a range and resize the selection. You can increase the size of a selected range if you need to. If you wanted to select a range called Database’ and then increase its size by 5 rows, you’d use this syntax:

   Range("Database").Select Selection.Resize(Selection.Rows.Count + 5, _Selection.Columns.Count).Select
   

7. 7

   Select the union of two named ranges. If you have two overlapping named ranges, you can use VB to select the cells in that overlapping area (called the «union»). The limitation is that you can only do this on the active sheet. Let’s say you want to select the union of a range called Great and one called Terrible:

   • Application.Union(Range("Great"), Range("Terrible")).Select
     

   • If you want to select the intersection of two named ranges instead of the overlapping area, just replace Application.Union with Application.Intersect.

Advertisement

1. 1

   Use this example data for the examples in this method. This chart full of example data, courtesy of Microsoft, will help you visualize how the examples behave:^[2]
   

   A1: Name	B1: Sales	C1: Quantity
   A2: a	B2: $10	C2: 5
   A3: b	B3:	C3: 10
   A4: c	B4: $10	C4: 5
   A5:	B5:	C5:
   A6: Total	B6: $20	C6: 20

2. 2

   Select the last cell at the bottom of a contiguous column. The following example will select cell A4:

   ActiveSheet.Range("A1").End(xlDown).Select
   

3. 3

   Select the first blank cell below a column of contiguous cells. The following example will select A5 based on the chart above:

   ActiveSheet.Range("A1").End(xlDown).Offset(1,0).Select
   

4. 4

   Select a range of continuous cells in a column. Both of the following examples will select the range A1:A4:

   ActiveSheet.Range("A1", ActiveSheet.Range("a1").End(xlDown)).Select
   

   ActiveSheet.Range("A1:" & ActiveSheet.Range("A1"). End(xlDown).Address).Select
   

5. 5

   Select a whole range of non-contiguous cells in a column. Using the data table at the top of this method, both of the following examples will select A1:A6:

   ActiveSheet.Range("A1",ActiveSheet.Range("A65536").End(xlUp)).Select
   

   ActiveSheet.Range("A1",ActiveSheet.Range("A65536").End(xlUp)).Select
   

Advertisement

Advertisement

Video

• The «ActiveSheet» and «ActiveWorkbook» properties can usually be omitted if the active sheet and/or workbook(s) are implied.

Did this summary help you?

Выделение диапазона строк

Как выделить в макросе диапазон строк, по первому столбцу (дата), т.е. со строки A8 по n.

RayShade » 29.12.2003 (Пн) 17:34

Гена » 29.12.2003 (Пн) 17:44

RayShade » 29.12.2003 (Пн) 18:00

Гена » 29.12.2003 (Пн) 18:16

Че тоя вообще уже ничего не понимаю.

Например: 1-день — 2 строки данных

2 день — 5 строк данных

3 день — нет строк с данными

4 день — 10 строк данных

5 день — 51 строк данных

6 день — еще сколько то

Как записать так чтобы, выделялись эти строчки, самостоятельно при запуске макроса. Хотелось бы поподробнее код, если можна заранее благодарен

amda » 29.12.2003 (Пн) 23:07

Организм человека содержит столько извести, что ее хватит на побелку курятника. (Hенужная информация)

GSerg » 30.12.2003 (Вт) 9:23

Как только вы переберёте все варианты решения и не найдёте нужного, тут же обнаружится решение, простое и очевидное для всех, кроме вас

Tuco » 30.12.2003 (Вт) 10:54

«There’s more than one way to do it!»

Гена » 08.01.2004 (Чт) 10:11

Спасибо всем за помощь.