To recover word document

Applied to: Microsoft Office Word 2020, 2019, 2016, 2013, 2010, 2007, and 2003

Closing the Word accidentally or a program/system crash may cause the unsaved Word document to disappear. Luckily, there is still a chance to recover unsaved Word documents in Windows 10/11 from Temporary Files, AutoRecover, or Word Document Recovery.

Besides, if your saved Word document gets deleted, you can restore deleted Word documents from the Recycle Bin or by using one of the best data recovery software. 

Have you accidentally closed your Word application without saving the document you had been working for a few hours? Have you lost the Word file unsaved due to a sudden program crash? Or mistakenly deleted some saved and essential Word document? If you are looking for an effective solution, you’ve come to the right place.

In this article, we will show you the most useful ways to recover unsaved Word documents. Furthermore, we also introduce you to a renowned office file recovery tool — EaseUS Data Recovery Wizard to help you restore deleted or permanently deleted Word documents in a few clicks. It is also competent to repair corrupted DOCX/DOC files as well as other documents.

Solution 1. Recover Unsaved Word Document from Temporary Files

Unsaved Word documents vanishing is a very unpleasant problem. Take it easy. There are three possible ways to find a Word document that is not saved. The following operations use Word 2016 edition as an example. The steps for Word 2013-2019 are similar.

Recovering unsaved Word documents requires you to turn on AutoSave in advance. If this feature is turned on, you can find the unsaved files through the following path:

C:UsersOwnerAppDataLocalMicrosoftOfficeUnsavedFiles

Or you can follow the steps given below to do it.

Step 1. In MS Word, click the «File» tab in the upper left.

Step 2. Click «Manage Document» and select «Recover Unsaved Documents» from the drop-down list.

Step 3. Check for your missing File in the dialog box. If it was a recent loss, it should appear.

Step 4. Open the recovered Word document and click the «Save As» button in the top banner.

Additional Help — How to Turn on AutoRecover

Many of us have experienced a situation where we have created a Word document and then accidentally closed it out without saving it. To avoid this kind of situation, you’d better enable AutoRecove.

Step 1. Open Word, go to «File» > «Options» > «Save».

Step 2. Tick the box of «Save AutoRecover information every * minutes» and «Keep the last autosaved version if I close without saving».

Step 3. Click «OK» to save the changes.

Excel, like Word, is an indispensable office software. If you lose an unsaved Excel document, you can use the methods we recommend to retrieve it.

Solution 2. How to Recover Unsaved Word Document from AutoRecover

Another way to get back an unsaved Word document is by using AutoRecover. AutoRecover file names end in the .asd file name extension. By default, Word searches for AutoRecover files every time that it starts, and then it displays any data found in the Document Recovery task pane. If the Document Recovery pane does not open, manually search for auto-recovered files. To do this, use one of the following procedures according to your Word version:

For Word 2010 — 2019:

Step 1. Open the Word program, and click «File» > «Options». In the left navigation pane, click «Save». Copy the AutoRecover file location path and paste it into File Explorer.

Tip: You can change the time of AutoSave interval in «Save AutoRecover information every xx minutes» and click OK.

Step 2. Go to the File Explorer, find the unsaved document, and copy the .asd file.

Step 3. Go to your Word app, click «File» > «Open» > «Recover Unsaved Documents» at the bottom.

Step 4. Paste the copied .asd file into the File Name box popping up. Open the Word file recover it.

If Word warns that «Word experienced an error…», repeat the steps and click «Open and Repair» at the open Unsaved Document window.

For Word 2002 — 2007:

Then, you can check the file content and save it as a new Word file at another secure location.

Solution 3. How to Restore Unsaved Word with Document Recovery

If your Word crashes or closes abruptly, it will automatically restore unsaved Word documents in most cases when it comes back online. You can find the unsaved Word documents on the left panel, under Document Recovery. 

Solution 4. How to Recover Word Document from Recycle Bin

If you deleted a Word document without emptying the Recycle Bin, you could undelete the Word document with simple clicks.

Step 1. Go to the Recycle Bin. Check if the deleted word file is still there. If you don’t know the name, look for file types such as DOC, DOCX, DOT, etc.

Step 2. Select the Word file and click «Restore» to recover it.

If you have emptied the recycle bin after deleting files, the deleted Word file may have been permanently removed. If you are in the same case, follow the next solution to restore deleted Word documents with a data recovery program.

Solution 5. How to Recover a Word Document with Word File Recovery Software

If you have lost saved Word documents because of careless deletion, hard drive formatting, or system errors, the above ways won’t work. At this time, you have to resort to a professional hard drive recovery software — EaseUS Data Recovery Wizard.

With this capable tool, you can recover deleted files in Windows 11/10/8/7 in various formats, including documents, videos, audio files, emails, ZIP, and more.

Note: This solution can be only used to recover deleted or lost Word documents that were saved on your computer before. 

Step 1. Choose the Word file location

Choose the drive or a specific folder and click the «Scan» button.

Step 2. Locate your Word files

The software will start immediately scanning all lost data on the selected drive. After the scan, click the «Documents» option in the left panel. Choose «Word» from the category bar. Then, click «Preview».

Step 3. Recover Word files

After previewing the lost Word files, select the desired Word files and click «Recover». Then, select a folder to store the Word files.

How to Recover Unsaved Word Document on Mac in 2 Ways

On Mac, AutoRecover is turned on by default. Take the two methods below to recover unsaved Word on Mac by using the AutoRecover function.

Solution 1. Restore Unsaved Word Document in Finder

Step 1. Start your Mac and open the Finder window.

Step 2. Search for AutoRecovery in the search bar. A list of files Word documents named «AutoRecovery save of» will appear. 

Step 3. Find and open the Word document you want to recover. 

Step 4. Click the «File» menu and choose «Save As». Rename the restored files and click the Save button. 

Solution 2. Restore Unsaved Word Document with Terminal

The unsaved Word document can be recovered from the temporary folder by using Terminal.

Step 1. Open your Mac and go to «Applications» > «Utilities» > «Terminal».

Step 2. Type open $TMPDIR and find the TemporaryItems folder on the list. 

Step 3. Find the file you need. Open and save it to recover unsaved Word documents. 

Conclusion

In this tutorial, you can learn five ways to recover unsaved Word documents on Windows and Mac devices. With the help of EaseUS file recovery software, you can restore lost Word documents, whether they are deleted, encrypted by malware, or corrupted when it was saved on a faulty partition. 

Hope these solutions can help you get back any lost Word documents.

Recover Unsaved Word Document Frequently Asked Questions

If you still have some Word recovery problems, you can read the following questions and answers to get more help.

How do I recover an unsaved Word document Windows 10?

Step 1. Click the «File tab», then choose «Info», then select «Manage Documents».

Step 2. Select «Recover Unsaved Documents» from the drop-down menu.

Step 3. Click «Open» when you have selected the document you want to recover.

Step 4. Click the «Save As» button and save your Word document.

How to recover unsaved Word document from USB?

If you have unsaved changes to a Word document that is stored on a USB drive, you can recover your work in two ways:

One way is to try opening the document from the Recent Documents list in Microsoft Word. To do this, open Word and click on the File menu. Then, click on Open and select Recent Documents. If your unsaved document is listed, you should be able to open it and recover your work.

Another way to recover an unsaved Word document from a USB drive is to use the Autosave feature. To do this, open the document that you were working on and look for the Autosave folder. If you find the file, you can recover your work by opening it in Word.

How to recover unsaved Word document 2016?

Try these methods to restore unsaved Word document in Word 2019, 2016, 2013, or 2010:

• Check your recently opened documents
• Try opening a temporary file
• Use the AutoRecover tool

Where are unsaved Word documents stored?

These Word files can be found via «File> Open» and click the «Recover Unsaved Documents» button at the very bottom of the Recent File List.

There are few experiences as universally familiar as losing a Word document. Everyone from high schoolers with Catcher in the Rye book reports to business executives with quarterly earnings knows the panic of their work disappearing when it’s just a few crossed-t’s away from being completed.

Fortunately, there are dependable ways to recover Word documents quickly and reliably. Whether your work was accidentally deleted, lost in a Microsoft Word crash, or simply disappeared, here’s a simple guide on how to recover unsaved Word documents.

And remember, if all else fails, installing a data recovery program like Acronis Revive or falling back on a recent file or system backup may help get your documents back (at least in a workably recent state).

Can I retrieve a Word document that wasn’t saved?

Whether you rely on Word for personal or business tasks, losing an unsaved document sucks.

If you don’t save your Word documents manually, your files can fall victim to an unexpected crash. If you’ve already experienced such loss, chances are you have a habit of pressing the «Save» button once (or twice) every so minutes. However, not many users have that habit.

Nonetheless, even if your system crashes with an unsaved document open, you can still recover it through several options.

You can recover unsaved files through Temporary Files, AutoRecover Files, Document Recovery, Recycle Bin, and Data Recovery solutions. We’ll explore all of those options more deeply a bit later in the article.

Does Word keep backup files?

Like most programs in its class, Microsoft Word has an in-built «auto-save» feature to automatically back up your progress every few minutes. The default auto-save folder to support this function is the AppData folder.

Examples of the file path to harvest copies of your work are:

C:UsersYour_UsernameAppDataLocalMicrosoftWord

Or

C:UsersYour_UsernameAppDataLocalTemp

Or

C:UsersYour_UsernameAppDataLocalMicrosoftOfficeUnsavedFiles

Word backup files carry the «.wbk» extension. If you haven’t disabled the backup option in Word, the program will make copies of your documents regularly.

To check if the backup option is active, go to «File» -> «Options» -> «Advanced»; then scroll down to the «Save» section -> select «Always create backup copy».

Can Word save to the Cloud? 

Yes, it can. If you rely on the native Windows option, your documents will be uploaded to OneDrive.

Having your documents on the cloud enables easier sharing and improves collaboration. It also allows easier mobile access (from a PC, laptop, smartphone, or tablet) and enhances data protection.

To save files to the cloud, do the following:

1.      Select the «File» menu and go for the «Save As» option;

2.      Choose «OneDrive»;

3.      Choose a descriptive file name and go for «Save».

You can save personal and payment information to OneDrive – Personal, with work-related files going to a company OneDrive. You can also pick an alternative location in the list or «Add a Place» of your preference.

If you’re using a third-party backup solution like Acronis Cyber Protect Home Office, you can upload backup files to the Acronis cloud. Storing your files with a dedicated cloud backup service provides improved cybersecurity via backup encryption, automated backups, and concrete data recovery processes.

How do I restore a permanently deleted file?

Multitasking on a device may lead to losing critical data. (files, documents, images, audio, video, etc.)

Sometimes, you can get distracted and accidentally delete files and folders. The most common reasons for an accidental deletion are:

·        Accidentally emptying your Recycle Bin;

·        Erasing documents via «Shift+Delete» keys;

·        Deleting files via the command line;

·        Deleting files with the «Do not move deleted files to Recycle Bin» option enabled

File deletion or corruption can also result from malware or virus infection on your device.

Fortunately, you can recover perma-deleted data and documents in several feasible ways. Not all of them are guaranteed to recover permanently deleted documents, but you may try all of them in order when needed.

You can still recover seemingly perma-deleted files due to how your hard drive operates. Every file on your device resides on a specific portion of the hard drive. When you delete a file from your hard drive, the drive removes the deleted data and marks the space it used to occupy as «free» for writing new data.

However, the file can be restored to its original location unless you write new data on the newly available space. Remember, you need to act quickly – even if you don’t save new data to the hard drive manually, your computer can initiate updates or save system data on the newly available space.

In such a scenario, recovering permanently deleted files becomes close to impossible.

 How to recover deleted Word documents via Backup?

Windows 10 and 11 pack a new feature called Backup and Restore.

The option enables users to create backups of their data to restore them later if needed. To recover permanently deleted files via Backup and Restore, you’d need to have enabled the option on your Windows device.

Here’s how to do it:

·        Connect the external media carrier holding the backup to your primary device

·        Go to «Control Panel» -> select «System and Security» -> click «Backup and Restore (Windows 7)» option

·        Once in the Backup and Restore menu, go for the «Restore my files» option -> a Restore wizard will pop up to start file recovery

·        If you can’t find the «Restore my files» option, go for the «Select another backup to restore files» option. Again, a wizard will pop up to assist you with your recovery

Recovering via Backup and Restore will replace all data on your Windows device with backed-up data. So, to avoid further data loss, make sure the backup contains all your crucial data.

How to recover deleted Word documents via Previous Windows 10/11 version?

Windows 10 and 11 offer another convenient feature to restore permanently deleted files – the «File History» option. If you had enabled the option before deleting a document, you could use it to recover permanently deleted files without additional software.

To do so:

·        Type «File History» in the Start menu or the Windows search bar

·        Select «File History Settings»

·        From the left panel on the pop-up window, choose «Restore personal files»

·        Navigate the feature to the backup you wish to restore. You can do that via the left and right navigation buttons at the bottom of the window. While you switch between backups, you can preview backup dates and the folders within them

·        Once you’ve located the specific backup storing the deleted documents, press the «Restore» button to recover the files to their original location

·        If Windows suggests it already carries a file with the same name in the destination folder, go for the «Replace the file in the destination» option

Lastly, close the window and check if the recovery is successful.

How to recover deleted Word documents via Command Prompt?

Sometimes, files and folders can be hidden due to the «Hidden files and folders» feature in Windows. You can use the Command Prompt to try and recover them.

To do so:

·        Type in «cmd» in the Search Bar on the Start menu

·        Choose the «Run as administrator» option

·        Type chkdsk *: /f in the Command Prompt. The * represents the letter of your hard drive, so replace it properly. Once you do, hit «Enter»

·        Type ATTRIB -H -R -S /S /D D:*.* in the Command Prompt window. Here, replace the «D» with the letter corresponding to your hard drive. Once you do, hit «Enter» again

A recovery process should start immediately if you’ve followed the above steps successfully. Let it finish and check if your files have been restored.

How to recover deleted Word documents via System Restore?

If you’re running Windows 10 or 11, you can opt for a System Restore to recover permanently deleted files. As System Restore takes regular (automated) snapshots of your whole OS, you can revert any unwanted changes to your system by reverting it to a previous point in time.

However, you’d need to have activated the System Restore option beforehand.

To recover perma-deleted files via System Restore, you need to:

·        Type in «create a restore point» in the Start menu or Windows search bar, and click «Enter»

·        Select «System Restore»

·        Go through potential system restore points in time and select the most appropriate to recover the deleted document; then, click «Next»

·        Confirm the specific restore point and choose «Finish»

·        Your PC or laptop will then restart to allow Windows to apply the changes

Although this option is convenient, you must remember that System Restore may affect recently installed drives, programs, and browser updates. As its primary goal is to repair your Windows environment, it will revert your device to an older version of itself. And that older version may not have some programs or apps installed or updated correctly.

Nonetheless, before the System Restore process starts, the feature will show you a window containing all programs that will be affected by it. This way, you can back up all potentially affected programs and files before you revert your system.

How to recover deleted Word documents via System Image Recovery?

System Image backup enables users to back up the entirety of a Windows 10 or 11 OS. However, the feature doesn’t allow single file and folder backup, so you wouldn’t be able to restore individual documents if needed.

Here, it’s either recover everything or don’t recover anything.

To recover documents via System Image Recovery, you need to:

·        Type «settings» in the Start menu or Windows search bar, and click «Enter»

·        Browse and select «Update & Security»

·        From the options list on the left, go for «Recovery»

·        Save the progress on any open documents or programs

·        Then, go for the «Restart now» button (you can find it under «Advanced Startup»)

·        Afterward, select “Troubleshoot” -> “Advanced Options” -> “See more recovery options” -> “System Image Recovery”

·        Browse through the list of System Image backup files and select the one containing the deleted document, then click «Next»

·        Choose additional restore options, then click «Next»

·        Review all System Image properties and click on «Finish» to start the restoration process

Once the restoration is complete, the deleted document should be restored to its original location. (or an alternative location, if you’ve chosen so in the Restore settings)

How to recover  deleted Word documents via a third-party Backup solution?

If you’re using a dedicated backup solution, you can initiate data recovery and restore permanently deleted files from your device.

For example, Acronis Backup and Recovery enables users to initiate efficient backups with over 20 supported platforms. Via the cloud, your data is securely stored in physical, cloud, virtual, and mobile environments.

If you need to recover files from Acronis backup, you can do it via the user-friendly interface.

To do so:

·        Start Acronis Cyber Protect Home Office -> select «Backup» on the sidebar

·        Select the backup containing the deleted documents from the backup list

·        On the panel to the right, select «Recovery»

·        The interface will present you with possible recovery models for the selected backup; depending on the backup’s type, you’d be able to choose from «Entire PC», «Disks», «Partitions», and «Files» options. To recover one or more documents, select «Files»

·        Cyber Protect Home Office will display the backup’s properties and the data inside it. Then, select a specific version of the backup based on the date and time. The default option here is the latest backup

·        The panel on the left lets you navigate the files you wish to restore in the panel on the right; after you select all needed documents, press «Next»

·        Choose a recovery destination on your device to place the selected documents after restoration. Here, you have two options – recover the data to its original location or choose a new location via the «Browse» button

·        You can customize the recovery settings for the current session via the «Recovery options» menu.

·        Once you’re done with the settings, go for the «Recovery now» button.

You can terminate recovery via the «Cancel» button at any time. However, aborted recoveries can still cause changes in the selected destination folder, so only go for the option if absolutely necessary.

Tips on preventing your Word Files from being deleted or unsaved

How to recover Unsaved Word Document?

We rely heavily on autosaves, yet huge chunks of progress and entire versions of documents can be lost when we don’t manually save our work. The good news is, this problem is so common that Microsoft has made it easy to recover unsaved Word documents:

1. In MS Word, click the File Tab in the upper left.

2. Click Manage Document and select Recover Unsaved Documents from the drop-down list.

3. Check for your missing file in the dialog box. If it was a recent loss it should appear.

4. Open the recovered Word document and click the Save As button in the top banner.

Did You Know?

You can update the frequency with which Microsoft Word autosaves your documents. Click File > Options > Save and change the number of minutes to ensure you have a recoverable version of all your docs available in case you need to recover Word documents in the future.

Knowing how to recover deleted Word documents will make you seem like a wizard to many of the people in your office, but it’s not complicated at all. Whether you’re trying to recover MS Word documents that were accidentally deleted or compromised by malware, there are a few easy steps that could help you get it back.

1. On your desktop, open the Recycle Bin

2. Search for your file by document name, file type, or date deleted. If you find your missing file, note the Original Location. When you recover deleted Word documents, they automatically are restored to that location.

3. Restore the deleted document and either find it in its original location or click Quick Access to find it in the Recent Files list.

Did You Know?

When a file is deleted you’re actually just removing a marker that points to where the file was stored on the disc. The file actually exists on the disc until its space is overwritten by new information. Until that happens, you have a chance to recover Word documents.

How to recover Word Documents after a Crash?

Recovering Word documents that didn’t save doesn’t always stem from user errors. Whether your system unexpectedly went down or Microsoft Word crashed, Word documents can be recovered if you quickly search for the lost files before other files can take their disk space.

1. When your system comes back online, reopen Microsoft Word. The program automatically recovers unsaved Word documents in most cases.

2. If your document doesn’t appear in the AutoRecover list, click on File, then Options, then Save.

3. Copy the AutoRecover file location filepath and paste it into File Explorer.

4. Open the folder with your document’s name and copy the .asd file with the most recent modification date and time.

5. Return to MS Word, click File, then Open, then scroll to the bottom of the recent documents list and click Recover Unsaved Documents.

6. Paste the copied file into the folder that pops up and open the file to recover it.

Did You Know?

One of the most common reasons for Microsoft Word crashing is corrupt add-on or template. If your program consistently crashes, try running Word without any of these features loaded to see if that helps to improve reliability.

Can I recover a permanently deleted word doc without a backup?

Recovering a permanently deleted file via backup is the easiest and most reliable option. However, sometimes, users don’t have the chance to add a specific document to the backup. If they then accidentally delete the document, recovery gets a hell of a lot more complicated.

In such a scenario, you have two primary options.

The first one is to use data recovery software. Nowadays, many recovery tools claim to have an exceptionally high rate of recovering permanently deleted files. Usually, such solutions can recover over 1000 file types and formats and claim to restore data even from corrupted partitions or bad sectors on your hard drive.

They typically operate by collecting the lost data bit-by-bit until they can fully restore its original state. Such an approach can prove handy occasionally, but that depends heavily on the state of your computer’s hard drive.

If you lose a document due to a bad sector on your hard drive, the software may not be able to recover all of the document’s pieces successfully. This may lead to an altered version of the document or may not be able to restore it at all. In such a case, the document would be lost unless you have it stored in some form of backup.

This leads us to the second option.

Suppose a user perma-deletes a document by accident. In that case, most often, their reaction is to panic, especially if they don’t have the document stored in a backup outside their primary device.

However, we live in a technologically webbed world – anyone can send documents to multiple recipients via email, social media platforms, or free cloud services.

You can go through old emails, check DropBox or OneDrive shared storage, or go through your correspondence on Facebook and Instagram to find the deleted file. Nonetheless, if you’re 100% sure you haven’t sent the document to anyone, you can opt for the data recovery software option.

As we’ve mentioned, AutoSave is an in-built feature available in Word, Excel, and PowerPoint. (given you have a Microsoft 365 subscription)

AutoSave saves the progress on your Word files every few seconds unless you tell it otherwise. If you store your Word files on OneDrive, SharePoint, or OneDrive for Business, AutoSave is enabled by default.

To save a copy of your work before implementing any changes, it’s better to use the command «File -> Save a Copy» rather than «File -> Save As». That way, AutoSave will not overwrite the original document with the changes you make afterward.

If you skip that step and end up with an overwritten document, you can still restore the original via Version History. To do so:

·        Open the Word file you wish to restore to a previous version

·        At the top of the windows, click on the filename and go for «Version History»

·        Review the dates and times of all versions to find the one you wish to restore -> click «Open Version»

·        An additional window will pop up and show you the specific version of the document

·        Once you’ve made sure this is the version you want to restore, click «Restore»

Whenever you open a Word document and make first changes, AutoSave will save those changes by adding a new file version to Version History. Afterward, AutoSave will regularly save changes to the document but only add new versions to Version History about every 10 minutes until you terminate the session. (ending the session means closing the Word document)

How do I get Microsoft Word to save AutoRecover versions every minute?

If you’re handling critical information via Word documents, saving a version of the file every 10 minutes may seem risky. However, Microsoft has thought of that – you can change the AutoRecover frequency to any number that suits you.

Here’s how to do it:

·        Open Word and go to File -> Options -> Save

·        You’ll see a settings section labeled «Save documents»

·        Under the «Save documents» line, type your chosen number (of minutes) in the «Save AutoRecover information every (…)» box

·        Once done, press «OK»

If you want to change the location for AutoRecover documents, go to:

·        File -> Options -> Save

·        Under the «Save documents» line, browse or type in the save path for saved documents in the «AutoRecover file location» field

·        Once done, press «OK»

The AutoRecover settings window allows you to also:

·        Disable AutoSave for OneDrive and SharePoint online files by default

·        Change the cache location for AutoRecover files. The default should be «C:UsersYour_UsernameAppDataRoamingMicrosoft[OFFICEAPPFOLDER]

·        Enable AutoSave on the computer by default

According to Microsoft, however, there is no option to use AutoSave locally in Office 2019 or 2021. Nonetheless, the AutoRecovery feature is still active to periodically save copies of your Word files to negate accidental data loss due to a crash.

Can I turn on AutoRecover in Word for Mac?

As with Windows, AutoRecover is available for Mac to protect the progress on your Word documents. Its default function here is the same – it makes a copy of your document every 10 minutes.

To enable AutoRecover and set the timeframe for making copies, you need to:

·        With Word open on your Mac, go to the «Word» submenu on the top

·        Choose «Preferences»

·        Choose the «Save» option

·        Choose «Save Auto-Recovery Information» and type in the duration you wish to set for AutoRecover copy creation

Microsoft advises users not to rely on AutoRecover as a substitute for manually saving their documents. (by clicking on the «Save» icon)

The most optimal way to preserve changes to your document is by manually saving it after every significant change. Nonetheless, it doesn’t hurt to set the AutoRecover timer to 5 minutes instead of 10 to guarantee you won’t lose progress due to a crash.

Keep in mind, when you manually save a document, its previous AutoRecover versions are removed.

On the other hand, AutoSave is a feature that saves your documents as you work on them. It works as if you’ve manually saved your progress. For Mac, AutoSave is available in Word, Excel, and PowerPoint for Mac and Microsoft 365 subscribers.

If you have AutoSave enabled, it’s less likely you’d need to rely on AutoRecover files.

Where is Autosave in Word located on Mac?

The AutoSave and AutoRecover features are linked in the Word menu. The path to enable AutoSave follows the same steps as with AutoRecover. However, you’ll have a few extra steps to complete before AutoSave is active for Word on your Mac.

Here’s how to do it:

·        Open Word

·        From the top menu, choose «Word» -> «Preferences»

·        Click on the «Save» icon

·        Tick the checkbox labeled «Turn on AutoSave by default»

·        From the Word document, enable the AutoSave toggle to save your progress to the cloud (OneDrive or SharePoint)

·        Explore more options from the AutoSave tab and select the «Automatically Save» option

·        The AutoSave toggle will appear on the top side of the Word toolbar

·        Name the document you’re working on and choose OneDrive or SharePoint as the storage location of the Word file

·        Click «Save» to enable AutoSave to store changes in your desired location in real-time

·        Your document will then be uploaded to the chosen location

·Once that’s done, AutoSave is on, and all changes you make to the document will be saved to OneDrive or SharePoint

Where can I find AutoSave Word documents on my computer?

If a power failure or a crash occurs, AutoRecover will typically recover the last version of your Word document automatically when you launch the app. Once AutoRecover opens the existing recovery file, it’s best to save it before editing or closing it immediately.

However, you may need to find AutoRecover files on your computer for other reasons. To do so:

·        Switch to Finder

·        Click «Go»

·        Click «Go to Folder» (you can also use the SHIFT + COMMAND + G combo)

·        Enter the specific folder path corresponding to Word, Excel, or PowerPoint

For Word:

/Users/Your_Username/Library/Containers/com.Microsoft/Data/Library/Preferences/AutoRecovery

For Excel:

/Users/Your_Username/Library/Containers/com.microsoft.Excel/Data/Library/Application Support/Microsoft

For PowerPoint: /Users/Your_Username/Library/Containers/com.Microsoft.Powerpoint/Data/Library/Preferences/AutoRecovery

Just a reminder: Replace «Your_Username» with your actual username.

As the AutoRecovery folder is hidden, typically, you won’t be able to find it by navigating in Finder. That’s why you need to use the «Go to Folder» feature and type in the full path to reach the folder.

Additionally, if you close a Word document and click «Don’t Save», the AutoRecover option won’t be active. The feature will delete the AutoRecover file because it assumes everything is okay and you wouldn’t need the AutoRecover file.

Can Microsoft Word recover previous versions of my document?

If you have turned the AutoRecover option on, it will automatically save versions of your documents regularly. (usually, at 10-minute intervals)

Once you have the AutoRecover files for your document, you can recover them depending on when you saved them.

There are two options: recover a saved file or an unsaved one.

If you have saved the document, you have to:

·        Open the document you were working on

·        Select “File” -> “Info”

·        Find «Manage Documents» and choose the file labeled (when I closed without saving)

·        A bar on the top of the file will appear; choose «Restore» to overwrite any previously saved versions

You can also compare AutoRecover versions by choosing «Compare» instead of «Restore».

If you haven’t saved the document, you have to:

·        Open Word and go for “File” -> “Info” -> “Manage Document” -> “Recover Unsaved Documents”

·        Select the specific file and click «Open»

·        In the top file bar, choose «Save As» to save the document

If you have stored AutoRecover files in OneDrive or SharePoint in Microsoft 365, you can view all historical versions of a document.

To do so in Office 365:

·        Open the file you want to inspect

·        Select “File” -> “Info” -> “Version History”

·        Browse through versions and select them to open them in a separate window

·        If you want to restore the document to one of the previous versions, choose «Restore»

Keep in mind, if you operate via a Microsoft account, you’d be able to retrieve the last 25 versions of a document. If you sign in with a school or work account, the retrievable version volume will depend on your library configuration.

To view AutoRecover versions in Office 2019-2016:

·        Open the document you want to inspect

·        Click “File” -> “History”

·        Choose a version to open in a separate window

If you can’t locate the «History» tab on the Word navigation pane, you may have a subscription version of Microsoft Office. If that’s the case, click the «Info» button and try accessing Version History from there.

To view AutoRecover versions on Mac:

·        Open the document you want to view

·        If you are using Microsoft 365 for Mac, choose the name of the document from the app’s title bar -> click «Browse Version History»

If you’re running Office 2016 or 2019 for Mac, go for «File» -> «Browse Version History»

·        Browse AutoRecover versions and choose which ones to open in a separate window.

To view AutoRecover versions on the web:

·        Open the document you want to view

·        Go for “File” -> “Info” -> “Version History”

·        Browse through AutoRecover versions and open the ones you want in a separate window

·        When you find the version you’re looking for, choose «Restore»

If you use SharePoint in Microsoft 365 to handle documents, you can track AutoRecover versions, share them with others, and check recycle bin storage if you accidentally delete a file.

How to search for Word doc which I know I saved?

If you’re sure you have saved a Word document but haven’t been able to locate it, worry not. There are several ways to unfold saved documents, even when you’re computer is swamped with Word files.

You can search a file via the taskbar, the Documents tab, or File Explorer.

To find a Word document via the taskbar, type in the document’s name (if you remember it correctly) into the search box on the Windows taskbar. If you don’t know the full name of the document, you can use a keyword from it.

You can get results even if you remember a keyword from the text body of the document. (and not its name)

Once you type the name or keyword, Windows will show all matches on your device and OneDrive.

You can select the Documents tab if you wish to narrow your search. Once you do, your search results will only show documents.

Moreover, you can open File Explorer from a taskbar shortcut or right-click the Windows Start menu and choose File Explorer. Afterward, you can select a location on your hard drive from the left window pane.

You can then search or browse to find the document you need. You can search your entire device by selecting «This PC», or go for «Documents» and only look for files stored there.

How to search for Word backup files?

Although Word backup is seamless once set up for users, finding specific Word backups may be difficult without preparation. Luckily, you can learn how to pinpoint different Word backups below.

Check Word settings

If you remember how to open the AutoSave settings in Word, you can skip the next set of instructions. If not, you need to:

·        Start Word -> click on «File»

·        Choose «Options» and then click on «Save» on the left

·        Ensure that the «Save AutoRecover information» option is enabled

Once you reach the settings window, go to the AutoRecover File Location field. Here, you can check the current AutoSave directory location.

By default, it would be «C:UsersYour_UsernameAppDataRoamingMicrosoftWord»

Once you locate the AutoSave directory location, you need to:

·        Launch Word

·        Navigate to the AutoSave directory

·        Look for the version of the automatically saved backup and double-click it; the file will open in Word

As we’ve mentioned, the AutoSave directory may be a hidden folder on your computer, primarily if it resides in the AppData folder. However, you can bypass that by pasting the directory location in File Explorer’s address bar.

Nevertheless, you can navigate to the folder manually if you follow the path. Just make sure to reveal hidden items to be able to see the AppData folder. Once that’s done, you should easily find your way to the AutoSave directory.

Check the AppData folder

As we’ve said, the AppData folder is the default location for AutoSave backups. The pathing to the AutoSave directory can vary; the most common places to look are:

C:UsersYour_usernameAppDataLocalMicrosoftWord

and

C:UsersYour_usernameAppDataLocalTemp

Sometimes, the most recent AutoSave versions may use a different location. Most often, you’d be able to find them in

C:UsersYour_usernameAppDataLocalMicrosoftOfficeUnsavedFiles

As with previously shown paths, replace «Your_Username» with the username corresponding to your user account.

Regardless of which folder holds your Word backups, the AutoSave files have weird-looking names, especially for a casual user. They typically have a tilde before their name and the «.tmp» extension alongside a 4-digit number assigned to them.

Below are some examples of what Word backup files look like in different scenarios:

·        ~wrdxxxx.tmp – such a name relates to a Word document within an AutoSave folder;

·        ~wrfxxxx.tmp – such a name relates to a temporary document file;

·        ~wraxxxx.tmp – such a name relates to an AutoRecovery file;

Complete AutoRecovery files won’t carry the «.tmp» extension but rather the «.wbk» extension. Once you locate them, you can double-click them to open the document in Word. An important note is always to save the file after you open it.

How to use the Recover unsaved documents option?

Sometimes, you’re sure you’ve saved a Word document, but your PC crashes, and you can’t locate the file afterward.

In such cases, you can still recover the document from the AutoSave location. To do so:

·        Open Word and go to «File»

·        Click «Recent», then select «Recover Unsaved Documents»

·        You will be redirected to the AutoSave location folder; you can browse the documents here and find the one you’re looking for

Another path to reach the AutoSave folder is as follows:

“File” -> “Info” -> “Manage Versions” -> “Recover Unsaved Documents”

After you open the file, make sure to save it.

Check the Documents directory

To check the Documents directory, you should:

·        Start Word

·        Select «File», then choose «Open»

·        Go for «Browse» and navigate to the directory you suspect holds the document

·        Ensure to change the File Type of the folder from «All Word documents» to «All Files»

·        If you’ve opened the correct folder, you should be able to see all corresponding backup files; you should easily spot the specific file as it is typically titled «Backup of (…)»

·        Once you find the backup, you can open and save it

How to search your Windows temporary files manually?

In some instances, finding a backup file via traditional methods is more challenging, especially if you can’t find the AutoSave folder.

However, you can manually search for temporary files by tracking their extensions. Autosaved Word files usually carry the .asd or .wbk file extension.

To search for those, you should:

·        Press the Windows Key + E on your keyboard; this will launch the File Explorer

·        Once it’s up, click on the search bar on the top right

·        Type in «.asd» or «.wbk» (without the quotes)

·        Press «Enter»

·        Windows will now search for all .asd and .wbk extensions

·        Once the search is complete, you can browse through the matches and find the file you’re looking for

·        Upon finding the specific file, right-click it and choose «Open File Location»; this will open the AutoSave directory location so that you can see all automatically saved backup files

If searching for .asd and .wbk extensions doesn’t bear any fruits, you can search for .tmp extensions. However, .tmp files aren’t necessarily all Word files. Many of them can support files from other applications, so you’d have to do some sorting.

How to recover Word Documents through Data Recovery Programs?

If none of these methods help you recover unsaved Word documents, your best bet is either backup software or data recovery software.

As always, the most secure and reliable way to recover data is with regular full image backups. Whether you use a Windows PC, a Mac, or a mobile device, having up-to-date backups ensure that you don’t lose your files – no matter what.

That said, if you didn’t have a backup plan in-place and active when you lost your Word document, you won’t have a backup to restore the file from.

In this case, personal cyber protection solutions like Acronis Cyber Protect Home Office are the best way to help you recover Word documents. Acronis Cyber Protect Home Office is an easy-to-use software solution that allows you to backup up the entire contents of your system so in the event of a disaster, you can locate a lost file and restore the MS Word document with just a few clicks. 

Final Thought

Whether your Word doc was deleted, encrypted by malware or corrupted when it was saved on a faulty partition, you can recover it with Acronis Cyber Protect Home Office. When armed with regular backups, your docs can be recovered quickly and easily so you never have to worry about losing a Word doc or any other file ever again.

Is this article up to date?

• Home>>

• Office Recovery >>
• How to Recover Deleted Word Documents Free in 2023

If you often write, edit, or handle Word documents, you probably have first-hand experience with how painful and easy it can be to lose one. Say, if you’ve been organizing your working folder and accidentally deleted a newer version of an important file instead of the older one. Or if your computer crashed while you were working on an important document. 

In such cases, there’s an array of data recovery methods to choose from and restore your Word files.

Is it Possible to Recover Deleted Word Files?

Yes, your Word files can be recovered easily if you choose the tool that best fits your requirements. There are also specific steps and precautions that you must follow to ensure safe, efficient file recovery.

However, if you realize you’ve lost your file and need to get it back, start the data recovery process immediately. Here, the sooner, the better. In such cases, you can often find your files in the Recycle Bin or employ simple, DIY methods to retrieve them.

However, if they don’t work or you’ve used Shift + Delete to remove the file, you can shift to professional data recovery software.

Method #1: Searching for AutoRecover Files

If you lose your files due to human error or system crashes, Microsoft Word has a beneficial feature called AutoRecover that can help you restore your documents. If you’ve enabled AutoRecovery, Word will keep saving your file at regular intervals of time while you’re working on it. This eliminates the need to save the document manually and even creates a temporary folder to recover the file if a data-loss situation arises.

You can turn on AutoRecover by following these steps:

Go to File < Options < Save < Save AutoRecover information every _ minutes.

There’s another way for you to find your lost files using AutoRecover. If you also have the Always Create Backup Copy selected, Word automatically creates backup copies of your files. 

These files are saved with the .wbk extension, and you can find them by going to this field:

Go to File < Options < Save < AutoRecover File Location

Now, head to the mentioned AutoRecover location and open the .wbk backup files just like you would regular Word documents.

Bonus: Recover from Temporary Files

There’s another way to find previous versions of your Word documents using the AutoRecover feature. If Word does not show your file even after AutoRecover has been turned on, you can look for them manually. These files use the .asd extension. You can recover these .asd files by following these steps:

1. Open the File tab in MS Word.
2. Go to Manage Document and select Recover Unsaved Documents.
   
3. If you’ve lost your file recently, it should appear in the dialogue box.
4. Now, open your recovered Word document and click the Save As button.

Method #2: Restarting Word to open AutoRecover Files

If you’ve turned on AutoRecover and you experience an unexpected computer crash, you don’t need to worry. There is a simple, straightforward method that will help recover your file. Word automatically restores the document you had been working on. You just need to follow these instructions:

1. Once you restart your device and Word comes back online, you will find the Document Recovery panel on the left. 
   
2. Under this panel, you will find Autosaved versions of your file along with a timestamp.
3. Open the version you want to recover, and you’re done.

Method #3: Restore Deleted Word Documents From OneDrive

For some time now, Word can save documents to the cloud, allowing you to access your files from anywhere and easily collaborate with others. To take advantage of this feature, you need to be a user of OneDrive, which is Microsoft’s file hosting service and synchronization service.

You will then get the option to save files to your OneDrive account instead of saving them locally on your computer. When a file is stored on OneDrive, you can enable the AutoSave feature by clicking on a button located in the top-left corner of the main Word window to save your documents automatically, every few seconds, as you work.

Steps to Restore Deleted Word Documents in OneDrive

1. Visit OneDrive and sign in.
2. Select Recycle bin in the navigation panel.
3. Select the Word document you want to recover and click the Restore button.

Method #4: Checking the Recycle Bin

Let’s look at the Word file recovery process from the Recycle Bin:

1. Click on the Recycle Bin icon on the desktop.
2. Once you’ve opened the folder, find the file you want to recover. If you can’t find it by name, search for DOC, DOCX, and DOT extensions files.
3. Now, select your file and right-click on it. Use the Restore option to send the file back to its original location.
   

Method #5: Data recovery software for Windows

Disk Drill is a data recovery tool that delivers professional results even though it was developed with the average user in mind.

Thanks to Disk Drill, you can avoid spending hundreds and maybe even thousands of dollars on professional data recovery services while achieving the same results—just from the comfort of your own home and possibly even for free because Disk Drill lets you recover up to 500 MB of data without paying, which is more than enough for hundreds of Word documents.

Steps to Recover Deleted Word Documents on Windows

1. Download Disk Drill from its official website.

   

   Data recovery for free
   Your Companion for Deleted Files Recovery

   Free Download

2. Open Disk Drill.
3. Click the Search for lost data button next to your storage device.
   
4. Select Word documents for recovery.
   
5. Begin the recovery process by clicking the Recover button one last time.
   

The second you launch Disk Drill, you notice that it certainly doesn’t look like your average data recovery tool. For starters, Disk Drill has a beautiful user interface that makes it effortless even for complete novices to figure out how to recover deleted Word documents with it. 

✔️ All major storage devices are supported, so it doesn’t mean if you’re reading this article because you want to learn how to retrieve deleted Word documents from a traditional hard drive or a portable USB flash drive—Disk Drill works equally well with all kinds of storage devices.

How to Prevent Your Word Files from Being Lost or Deleted?

It can be pretty frustrating to lose your Word file when you’ve spent so much time working on it. While there are several available methods to help recover your lost or deleted files, it might be a good idea to follow a few practices that can help prevent data loss. Let’s go through some of these tips and tricks:

• ↪️ Enable AutoRecover – The AutoRecover feature on Word is very useful to assist you in recovering your files that are lost due to system crashes, user error, program issues, etc. Ensure that you’ve turned on this feature to protect your files in these situations.
• 💾 Keep diversified backups – It is essential to keep multiple backups for your Word files to prevent complete data loss. We recommend that you keep saving your document at regular intervals and make backups across different devices. To avoid significant data loss, you can save your files on external drives, cloud storage solutions, etc.
• 💻 Don’t overload your drive – Ensure that you don’t store your files on the same drive as your software/operating system. System failures or malware affect this drive first, and in such a scenario, all your data can be lost. Make sure your word files are saved onto a separate drive to avoid this.
• ❌ Be cautious of user errors – You can use advanced options like versioning features and tracked changes to protect your files and avoid user errors. You can often lose data while editing or deleting certain parts of the documents. These features can help record your changes and allow you to return to a particular version if needed without losing data. 

Conclusion

It’s possible to lose your Word documents for a variety of reasons. While you must take steps to safeguard your files, data loss can often be unforeseen and unpredictable. In such situations where you end up losing your files, you can choose from the many available data recovery methods.

The solutions mentioned in this article are quite reliable, safe, and user-friendly. You just need to follow a few simple steps to recover your lost or deleted word file for free. 

FAQ

Follow these steps to recover an a deleted Word document that you didn’t save:

1. Open Word and click the File Tab in the upper left.
2. Click Manage Document and select Recover Unsaved Documents.
3. In the dialogue box, look for your missing file.
4. Open the recovered Word document and click the Save As button.

If you have a Microsoft 365 subscription, check the following paths for AutoRecover files:

C:Users<UserName>AppDataRoamingMicrosoftWord

C:Users<UserName>AppDataLocalMicrosoftOfficeUnsavedFiles

Note: In these paths, replace <UserName> with your username.

If this doesn’t work, follow these steps:

1. Open Word
2. Select File, go to Info and click Manage Document.
3. Now, select Recover Unsaved Documents.
4. Open the recovered Word document and click Save As. 

Many people report file loss after upgrading to the latest version of Windows 10 because they’re signed in using a temporary account. To verify if that’s really the case, you can open Settings, click on Accounts, choose Sync your settings, and look for a message that says: You are logged on with a temporary profile. Roaming options are currently unavailable. All you need to do to get your files back is sign in with your regular account.

Yes, it is possible to recover deleted Word documents on Mac. Here’s how:

1. Open Word.
2. From the menu, click Preferences.
3. Ensure that Confirm file format conversion at Open is selected, and close the dialogue box.
4. Click File and go to Open. 
5. On the Open menu select Recover Text and open the document.

Here’s how you can filter results in Disk Drill to show only Word documents:

1. Download and Install Disk Drill.
2. Select the hard drive and click Search for Lost Data.
3. To filter results after the scan is complete, type .docx in the search bar and Disk Drill will only show word documents. 
4. Click Recover to restore your file and choose a recovery location.

If you want to recover the deleted files to a specific folder, don’t forget to specify it before you click the Recovery button. To do that, locate the “Recover to” field, click on it, and select the desired recovery directory.

If your Word file gets deleted, the first step should be to check the Recycle bin. Here’s how you can recover deleted Word files via the Recycle bin on Windows 11:

1. Double-click the Recycle Bin on the Desktop.
2. Search through the list of documents to check if the deleted Word document is still there. If you don’t know the file name, filter the files with the .doc, .docx, and .dot extensions.
3. If you find the desired Word file, right-click the file name, and then select Restore to send the file back to its original location.