Show all comments in word - Word и Excel - помощь в работе с программами

You’re working on a Microsoft Word Document and can’t figure out how to see all of the comments at the same time.

This article will show you how to view all of the comments in your Word doc at the click of a button.

How to show all comment lines in your Word Document

Follow these 4 easy steps to view all comments:

Open the Word document.
In the toolbar, click Review.
Find and click Tracking.
Tick All Markups.

Only want to see the comments not all changes?

If your Microsoft Word Document is full of tracked changes, comments and formatting updates and you want to clear the air for comments only here’s how you do it:

Open the Word document.
In the toolbar, click Review.
Find and click Tracking.
Click Mark-up Options.
Clear everything except Comments.

Need a better way to collaborate on Microsoft Word Documents?

You’re working on a word document with your team, each of you adding comments and tracking changes along the way. Then you realise two people have been working on the same document at once and you no longer have all of the changes in the one file.

You start googling ‘How to merge Word documents with comments?’ and think there has to be a better way!

Enter purpose-built tools, such as Simul Docs, designed to help you seamlessly collaborate on Microsoft Word documents with your team.

Simul Docs is an easy to use tool that works to keep track of a Word document as your team make edits. Automatically saving new versions each time the document is opened and edited, tracking all changes (even if you forget to turn track changes on).

Simul also recognises when two people are editing a document at the same time, saving each person’s changes in a separate ‘branch’ so no one’s work is overridden.

You can then ‘merge’ these two branches with the click of a button. Bringing both author’s changes back into the same document, allowing you to easily identify the differences. It’s that easy!

Источник

Show or Hide Comments in Microsoft Word Documents

by Avantix Learning Team | Updated January 10, 2021

Applies to: Microsoft^® Word^® 2010, 2013, 2016, 2019 or 365 (Windows)

You can show and hide comments using the Review tab in the Ribbon in Microsoft Word. If you add comments in a Word document, they will appear in a markup area on the right side of pages by default. If you want to show or hide comments, you’ll need to control the display of markup. Keep in mind that comments that are hidden could be displayed by a colleague or client.

The markup area appears in Print Layout View (the default view in Word) whenever a document includes comments and its appearance can be controlled using settings on the Review tab in the Ribbon. The default markup is set to Simple Markup with comments displayed. If the markup area is not appearing on the right, click Show Comments in the Comments group. Tracked changes also appear in the markup area.

In this article, we’re assuming that the default markup options are being used (although you can change the display of markup using Track Changes Options).

Recommended article: How to Remove Comments in Word (3+ Ways to Delete Comments)

Do you want to learn more about Microsoft Word? Check out our virtual classroom or live classroom Word courses >

Hide comments using Display for Review

To hide comments in the markup area using Display for Review:

Click the Review tab in the Ribbon.
In the Tracking group, click Display for Review. A drop-down menu appears.
Select No Markup or Original to hide the markup area, including comments.

The following drop-down menu appears when you click Display for Review:

When you click Display for Review, you have the following options:

Simple Markup which displays the markup area with comments and revisions. If you select Simple Markup and then click Show Comments in the Comments group, the markup area appears or disappears (if there are no tracked changes). If no markup area appears on the right, comments appear as speech bubbles that you can click to display the comment.
All Markup which displays the markup area with all comments or revisions as well as lines to their locations in the text.
No Markup which hides the markup area so that comments and revisions are hidden.
Original which hides the markup area as well as any revisions made to the document. In regard to comments, this option is the same as No Markup.

In the following example, Simple Markup is selected as well as Show Comments in the Comments group (Print Layout View in Word 365):

In the next example, Simple Markup is selected and Show Comments is not selected in the Comments group (Print Layout View in Word 365):

Comments appear in different ways depending on the selected view. Typically, you would change views using the View tab in the Ribbon. If you select Draft View, comments appear as the initials of the reviewer with square brackets and are highlighted with a background color. You can position the mouse pointer on the text to view the comment in a pop-up bubble. In Read Mode View, comments appear as speech bubbles to the right of the text. Simply click a bubble to view a comment.

Hide comments using Show Markup

To hide comments using Show Markup:

Click the Review tab in the Ribbon.
In the Tracking group, click Show Markup. A drop-down menu appears.
Select Comments to deselect comments.

The Show Markup drop-down menu includes the following options:

Show comments in the markup area

To show comments in the markup area:

Click the Review tab in the Ribbon.
In the Tracking group, click Display for Review. A drop-down menu appears.
Select Simple Markup or All Markup to show the markup area, including comments.
Click Show Markup. A drop-down menu appears.
Ensure Comments is selected.
If you selected Simple Markup, in the Comments group, select Show Comments in the Comments group.

View all comments using the Reviewing Pane

To view all comments regardless of view:

Click the Review tab in the Ribbon.
In the Tracking group, click Reviewing Pane. A drop-down menu appears.
Select either the horizontal or vertical display. The Reviewing Pane appears and will displays comments and revisions.

You can click the Reviewing Pane button again in the Ribbon to hide the Reviewing Pane.

Hiding markup is not the same as accepting changes or deleting comments. You should accept or reject changes and delete comments in your Word document before you send out the final version.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Find and Replace in Word (and Use Wildcards)

How to Superscipt or Subscript in Word (with Shortcuts)

How to Insert or Type the Sigma Symbol in Word (Σ or σ)

How to Insert Excel Data into a Word File (Linked or Unlinked)

How to Insert a Check Mark or Tick Mark in Word (5 Ways with Shortcuts)

Related courses

Microsoft Word: Intermediate / Advanced

Microsoft Excel: Intermediate / Advanced

Microsoft PowerPoint: Intermediate / Advanced

Microsoft Word: Long Documents Master Class

Microsoft Word: Styles, Templates and Tables of Contents

Microsoft Word: Designing Dynamic Word Documents Using Fields

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at info@avantixlearning.ca if you’d like to arrange custom instructor-led virtual classroom or onsite training on a date that’s convenient for you.

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at info@avantixlearning.ca

Источник

Use Word with your keyboard and a screen reader to add comments in a Word document. We’ve tested it with Narrator and JAWS, but it might work with other screen readers as long as they follow common accessibility standards and techniques. With comments, you can suggest modifications to documents or mark issues for follow-up. You’ll learn how to reply to a comment or delete comments after reading.

Need instructions on how to add comments to a Word document, but not using a screen reader? Refer to Insert or delete a comment.

Notes:

New Microsoft 365 features are released gradually to Microsoft 365 subscribers, so your app might not have these features yet. To learn how you can get new features faster, join the Office Insider program.
To learn more about screen readers, go to How screen readers work with Microsoft 365.

In this topic

Add a comment
Find comments inline
Read a list of all comments
Make JAWS read comment texts automatically
Navigate between comments
Navigate between the document and the comments
Use keyboard shortcuts with comments
Reply to comments
Delete comments
Resolve comments

Add a comment

You can add a comment in a Word document, for example, when you are reviewing someone else’s work, if you want to write a note in your own document, or if you’d like to track issues for follow-up.

Navigate to the location in the body text where you want to insert your comment. For more information, refer to the section «Read a document» in Basic tasks using a screen reader with Word.
To select the words in the body text to be highlighted as commented text, hold Ctrl+Shift and press the Right arrow key (to select words after the current cursor location) or Left arrow key (to select words before the current cursor location). You hear each selected word.
To add the new comment, press Ctrl+Alt+M. The focus moves to a new comment text box by the side of the page (called the side track).

Tip: You can also add a comment from the Comments pane. To do so, press Alt+Z, C or Alt+R, P, 1, L to open the pane. You hear: «New comment, button.» Then press Enter.
Type your comment, and press Ctrl+Enter to save it as a new comment thread. To return the focus to where you left off in the body text, press Alt+F12.

Find comments inline

Comment insertion points are highlighted in the document’s body text and announced by your screen reader when you use All Markup mode.

To turn on the All Markup mode, press Alt+R, T, D. The markup menu is expanded, and you hear the name of the currently selected markup. In the markup list, press the Up or Down arrow key until you hear «All markup,» and then press Enter to select. The focus returns to the body text.
You can now start reading the content in the document. You can, for example, start continuous reading from your current location in the text or navigate the text line by line. Your screen reader announces when it finds a comment in the text.
To stop reading at any time, press Ctrl. To read the previous comment, that is, the one you just passed, press Alt+R, V.

Make JAWS read comment texts automatically

By default, JAWS only reads the comment info, for example, who inserted the comment and when, but not the comment text itself. To have JAWS read the comment text automatically when the focus is on a comment, you need to go to the JAWS verbosity settings and turn on Control description.

To open the JAWS settings center dialog box, press the SR key+6.
Press the Tab key until you hear «Speech verbosity,» press the Down or Up arrow key until you hear «Verbosity level,» and then press Enter.
Press the Tab key until you hear «Configure verbosity levels,» press the Down or Up arrow key until you hear your current verbosity level (Beginner, intermediate, or advanced), and then press Enter.
Press the Tab key until you hear «Items to be spoken,» press the Down or Up arrow key until you hear «Control description,» and then press Spacebar. Press the Tab key until you hear «OK button,» and then press Enter.
To close the settings center dialog box, press the Tab key until you hear «OK button,» and then press Enter.
Move the focus to a comment. You hear who inserted the comment and when and then the comment text. If the focus is already in the comment pane and you press the Up or Down arrow key to navigate to another comment, you might find that the comment text is not announced. When that happens, press Insert+Tab on the comment you want to hear, and JAWS reads the full comment information, including the comment text.

Navigate between comments

No matter where you are in the document, you can quickly jump to and read the next or previous comment thread.

To move to the next comment thread from your current location, press Alt+R, N. To move to the previous comment thread, press Alt+R, V. The focus moves to the thread in the side track, or in the Comments pane if you have it open.

Tip: When the focus is on the very last comment and you press Alt+R, N, the focus moves back to the first comment.
To read the first comment of the thread, with Narrator, press the SR key+0. With JAWS, move the focus inside the commented text, and then press Alt+Shift+Apostrophe (‘).
If the comment thread has replies, press Enter to expand the thread, use the Down and Up arrow keys to navigate between the replies, and read them individually as instructed in step 1. To collapse the thread after reading it, press the Up arrow key until you reach the first comment, and then press Enter.
To return the focus to the body text, press Alt+F12.

Navigate between the document and the comments

Switch the focus between the document and the comments: When the focus is inside the commented text or on a comment, press Alt+F12.
Cycle through different areas in Word: Press Alt+Z, C or Alt+R, P, 1, L to open the Comments pane, and then press F6. The focus cycles between the document body, the Comments pane, status bar, and ribbon. F6 will work even if the focus is not inside a commented text.
Navigate from a comment to the document body: When the focus is on a comment, press Esc. The focus moves from the comment to the commented text in the document.
Navigate from the document body to a comment: When the focus is inside the commented text, press Shift+F10 or the Windows Menu key to open the context menu. Press the Down arrow key until you hear «Go to comment,» and then press Enter.

Tip: In the context menu, you can also find other comments related commands such as Edit comment, Reply to comment, and Resolve comment which also move the focus to the comment area.

Use keyboard shortcuts with comments

To do this	Press
Move the focus between the document and the comments.	Alt+F12
Read the comment at cursor with JAWS.	Alt+Shift+Apostrophe (‘)
Show a list of comments with JAWS.	Ctrl+Shift+Apostrophe (‘)
Read the next comment.	Alt+R, N
Read the previous comment.	Alt+R, V
Open the Comments pane.	Alt+R, P, 1, L or Alt+Z, C
Open the context menu to access comment related items when the focus is on the commented text.	Shift+F10 or the Windows Menu key
Insert a comment.	Ctrl+Alt+M
Post a comment.	Ctrl+Enter

Reply to comments

Navigate to a comment thread you want to reply to.
Press the Tab key until you hear: «Add mention or reply.» Press Enter, type your reply, and then press Ctrl+Enter to save it. The focus returns to the comment thread.
To return the focus to the body text, press Alt+F12.

Delete comments

You can delete comments and comment threads one by one or delete all comments in the document at the same time.

Delete a single comment

Navigate to a comment thread that contains the comment you want to delete.
Press Enter, and then use the Down and Up arrow keys to navigate to the right comment.
Press the Tab key until you hear: «More thread options, button.» Press Spacebar to open the menu. Then press the Down arrow key until you hear «Delete comment,» and press Spacebar. The comment is deleted and the focus returns to the thread.

Delete a comment thread

Navigate to a comment thread you want to delete.
Press the Tab key until you hear: «More thread options, button.» Press Spacebar to open the menu. Then press the Down arrow key until you hear «Delete thread,» and press Spacebar. The thread is deleted and the focus returns to the body text if you had the thread open in the side track, or to the New button if you had the thread open in the Comments pane.

Delete all comments

Press Alt+R, D, O.

Resolve comments

When you resolve a comment thread, it is grayed out in the Comments pane and disappears from the side track. No more replies can be added to a resolved thread. You can delete or reopen a resolved thread. Resolving a thread doesn’t delete it.

Navigate to a comment thread you want to resolve.
Press the Tab key until you hear: «More thread options, button.» Press Spacebar to open the menu. Then press the Down arrow key until you hear «Resolve thread,» and press Spacebar.

Tip: To reopen a resolved comment thread, you must open the Comments pane, as resolved comments disappear from the side track. Press Alt+Z, C to open the pane if it’s not already open. Then navigate to the thread, press the Tab key until you hear «Reopen, button,» and press Enter. The thread is editable again.

In this topic

Add a comment
Navigate through comments
Reply to comments
Resolve comments
Delete comments

Add a comment

In the Word document, navigate to the location in the text you want to add the comment to.
Drag your finger along the right edge of the screen until you hear: «Not ticked, More options.» Double-tap the screen. You hear: «Tab menu, Home selected.»
Double-tap the screen, swipe right until you hear «Review tab,» and double-tap the screen.
Swipe right repeatedly until you hear «New comment, button,» and double-tap the screen.
Use the on-screen keyboard to type your comment. When done, swipe down-then-left to close the keyboard, swipe right until you hear: «Post comment, button,» and double-tap the screen. The comment is added to the document as a new comment thread and the focus moves to the Close button in the comment pane.
To close the comment pane and return to the document, double-tap the screen.

Navigate through comments

Each comment in a Word document is indicated with a small speech bubble in the document’s right margin. To hear a comment, first navigate to the comment pane in the margin, and then open the comment pane.

To go to the comment pane in the document margin, swipe right repeatedly until you hear: «Comment, hints.»
To go to the first comment, swipe right again, and double-tap the screen. The comment pop-out opens. Swipe right until you hear the comment. TalkBack also announces who wrote the comment and when, and if the thread has any replies. If there are replies, keep swiping right until you have heard all of them.
To move to the next comment, swipe right-then-left, and then swipe right until you hear the comment.

Reply to comments

To reply to a comment thread, first navigate to the first comment in the thread as instructed in Navigate through comments.
Swipe right until you hear «Add mention or reply,» and double-tap the screen.
Use the on-screen keyboard to type your comment. When done, swipe down-then-left to close the keyboard, then swipe right. You hear: «Post reply, button.» Double-tap the screen. The focus returns to the comment pane.

Resolve comments

When you resolve a comment thread, no more replies can be added to it. You can reopen a resolved thread. Resolving a thread doesn’t delete it.

To resolve a comment thread, first navigate to the first comment in the thread as instructed in Navigate through comments.
Swipe right until you hear «More thread actions, button,» and double-tap the screen. You hear: «Delete thread.» Swipe right until you hear «Resolve thread,» and double-tap the screen. The focus stays in the comment pane.

Tip: To reopen a resolved comment thread, navigate to it. When you hear the first comment, TalkBack also announces that the thread is resolved. Drag your finger around the lower-left corner of the screen until you hear «Button, reopen,» and double-tap the screen.

Delete comments

You can delete each individual comment thread.

To delete a comment thread, first navigate to the first comment in the thread as instructed in Navigate through comments.
Swipe right until you hear «More thread actions, button,» and double-tap the screen. You hear: «Delete thread.» Double-tap the screen, and double-tap the screen again to confirm the deletion of the comment thread. The focus stays in the comment pane.

Learn how to add comments in Word, how to remove comments in Word, print without comments, change font size of comments, etc.

In Word, you can use comments to add notes to the document content. Comments are saved with the document and travel with the document if you share it with others. Comments are especially useful in the editing and reviewing process of a Word document. Different people can add comments and reply to other people’s comments. When finished, all comments can easily be deleted.

Word has a number of built-in tools dedicated to comments. In this article, you will learn how comments in Word work and how to use the comment tools. The basic information about comments applies to both the built-in comment functionality and the functionality of the DocTools CommentManager add-in.

The information in this article applies to Word 2013, Word 2016, Word 2019, Word 2021, and Word for Microsoft 365 on PC/Windows. Part of the information in this article also applies to Word 2010 and earlier versions but the comment tools and the ways to access them differ. In case of Word for Microsoft 365, see the notes below about Modern Comments.

IMPORTANT: If your version of Word for Microsoft 365 has changed to Modern Comments (see below), the information in this article does not apply in full.

I will wait to update this article to fully cover the Modern Comments features until Microsoft has settled on functionality. So far, the functionality is changing too often.

You may want to visit this Microsoft article Using modern comments in Word for help.

About Microsoft’s change to Modern Comments in Microsoft 365

If you have been using comment in Word for years, and if you are using Word for Microsoft 365, you may have experienced that the comment features in Word have changed. Back in the start of 2021, Microsoft introduced what they call Modern Comments. Modern Comments work quite differently than comments in Word have been working for years. Microsoft now refers to the old comments as Classic Comments.

As of July 2022, Microsoft may still not have rolled out Modern Comments to all users. The rollout has been quite slow. Mid 2021, I had to install the Insider Beta version of Office on a computer to get access to Modern Comments so I could test it. I did not see Modern Comments in my version of Microsoft 365, Current Channel, until in the spring 2022.

The switch to Modern Comments has frustrated many users and made many users angry. I agree with those users. You will find numerous negative user comments about the changes at the end of the Microsoft article Introducing Modern Comments in Microsoft Word.

Microsoft has listened and some improvements have been made. However, I still find Modern Comments extremely inefficient to work with compared to Classic Comments. Also, Modern Comments still have lack of functionality compared to Classic Comments.

How to get the old comment features back

Many users have requested a way to revert to the old comment features, Classic Comments. Microsoft has introduced a temporary option in Word that lets you turn off Modern Comments and revert to Classic Comments. Unfortunately, we must expect that the option will disappear some day.

To get the old comment features back:

Select File > Options > General > turn OFF the Enable modern comments check box. Click OK.

This will revert to the old comment features. The change of the setting does not take effect until you have restarted Word.

About the DocTools CommentManager add-in and Modern Comments

In this article, I link to my DocTools CommentManager add-in in relation to specific features. Unfortunately, I experienced that many features in the add-in didn’t work with Modern Comments. As of 20-Jun-2021, I released version 3.0 of DocTools CommentManager that works with both classic comments and Modern Comments.

The DocTools CommentManager add-in makes it faster and easier to manage comments in Word. In addition, the add-in lets you review comments in Word from one place, rank comments by importance, extract all comments to either Word or Excel, create inline comments for instructions and help, etc. DocTools CommentManager add-in is completely compatible with Word’s own comment features.

Where to find the comment tools in Word

You will find the dedicated comment tools on the Review tab in the Ribbon.

The Comments group on the Review tab includes tools that are dedicated to comments.
The Tracking group on the Review tab includes tools that are used both in relation to comments and tracked changed. In this group, you will find tools to use for changing how comments are displayed.

Figure 1. The built-in comment tools in Word are found on the Review tab.

Word lets you add two levels of comments. First-level comments and replies to first-level comments.

You can add first-level comments in Word either via commands in the Ribbon or by using a keyboard shortcut. To can add a reply to a comment directly from the comment. Read on below.

How to insert a comment in Word

Word lets you view documents in a number of ways. In relation to comments, Print Layout view gives you the best overview. You can, for example, switch view from View tab in the Ribbon > Views group. You can also press Alt+Ctrl+P to switch to Print Layout view.

The built-in functionality in Word lets you add/insert comments from two different places. To insert a comment in Word:

Select the text you want to comment.
The selected text will be marked as the comment scope. If no text is selected, Word will mark the preceding word, if any, as the comment scope.

To make it as easy for other users to understand your comment, make sure to select precisely the text that the comment refers to instead of, for example, selecting entire paragraphs.
Follow step 2a, 2b, or 2c:
a. Select the Review tab in the Ribbon > Comments group > New Comment
OR
b. Select the Insert tab in the Ribbon > Comments group > Comment
OR
c. Press the keyboard shortcut Alt+Ctrl+M.
The inserted comment appears in the markup area (or balloon area) in the margin or in the Reviewing Pane depending on your settings for display of comments. See How to show comments in Word below. See Figure 2 below.
In the inserted comment, type the comment text.
When finished, press the Esc key to return to the document text or click in the document.

Note that pressing Esc will select the text you marked in step 1 above. If you have DocTools CommentManager, pressing Esc will position the insertion point after the scope you selected, ready for you to continue typing without first deselecting the comment scope.

If you are using the DocTools CommentManager add-in, you can insert comments via DocTools tab > CommentManager group > Insert Comment.

NOTE: Comments in Word are stored in the documents. A comment can be edited by anyone who has access to edit the document and not only by the original author who inserted the comment.

Figure 2. A new comment has just been added, ready for typing comment text. Note that if Simple Markup is selected in the Tracking group on the Review tab, the commented text (comment scope) will only be marked by a color when you have selected the comment in the markup area. If your document is in Draft view instead of Print Layout view, the comment will appear in the Reviewing Pane.

Figure 3. By default, Word shows pictures by comments. You can turn off the pictures.

NOTE: By default, Word shows pictures by comments in the balloon area. You can toggle off/on the pictures by right-clicking in a comment and selecting Hide Pictures by Comments (will change the label to Show Pictures by Comments).

Pictures are turned off in all the following illustrations in this article. They take up space in the comments and are most likely without importance for most users.

How to add a comment as a reply to another comment

Word lets you add two levels of comments. First-level comments and replies to first-level comments.

To add a reply to an existing comment:

Click in the comment text of the comment you are going to reply to.
Click the Reply icon below the comment text (See Figure 5 below).
OR
Right-click in the comment and select Reply to Comment.
In the inserted comment reply, type the comment text.
When finished, press the Esc key to return to the document text or click in the document.

Replies to comments are indented below the comment to which they belong. You can add more replies to the same comment. All replies will appear on the same level – they will all be shown as replies to the first-level comment even if a reply is actually written as a reply to another reply.

Figure 5A. Click the Reply icon to add a reply to an existing comment.

Figure 5B. A new comment has been added as a reply to an existing comment.

If a page has too many comments for Word to have room for all the comment text, the comments will be collapsed. A comment will expand when you click the comment.

Note that Word 2013 and later versions do not number comments when shown in the balloon area/Comments pane. Only if you view comments and revisions inline or in the Reviewing pane, or if you switch to Draft view or Outline view, numbers are shown together with the author initials. Syntax for comments numbers shown inline: NN#, where NN are the initials and # the index number of the comment, counted from the start of the document. Example: LF5. You will not be able to see on the number whether a comment is a first-level comment or a reply to another comment.

The DocTools CommentManager add-in shows the actual comment number and total number of comments in the Status Bar when you use the Previous Comment or Next Comment commands.

How to edit a comment in Word

To edit an existing comment in Word:

Make sure the comment is shown. See How to show comments in Word.
Click in the comment and add, delete, or modify the comment text.

How to resolve a comment in Word

Word lets you mark a comment as resolved. This will change the font color(s) of the comments to a pale look. Marking comments as resolved may help you keep track of which comments still need attention.

To mark a comment as resolved:

Click in the comment text of the comment you are going to mark as resolved.
Click the Resolve icon below the comment text (see Figure 5 above).
OR
Right-click in the comment and select Resolve Comment.

The Resolve icon changes to Reopen. If needed, you can turn off the resolved status again by clicking Reopen or by right-clicking in the comment and selecting Reopen Comment.

Why can’t I resolve comments in Word?

You may experience that the Resolve icon and the Resolve Comment command are grayed out, indicating that the commands are disabled and cannot be used. To find out why this happens and how to solve it, read on below.

What to do if the Resolve icon is grayed out – and what causes the problem?

The Resolve feature was introduced in Word 2013. The Resolve feature is grayed out under the following conditions:

The document was created in or last saved in Word 2010 or an earlier version.
The document is in compatibility mode.
If the document is in compatibility mode, newer Word features cannot be used. You will see the text (Compatibility Mode) after the file name in the Title bar of the Word window.

How to solve the problem

You can convert the document to allow all features in you Word version to be available. Use one of the following methods to update the document to your version of Word. This will enable the Resolve feature:

METHOD 1: Select File > Info > click Convert. Save the document.
METHOD 2: Select Save As (F12). In the Save As dialog box, turn off the option Maintain compatibility with previous versions of Word. Click Save. See the illustration below.

IMPORTANT: Conversion of a document may result in changes to the formatting of the document, depending how it was set up. For examples, the widths of tables created in Word 2010 and earlier may change when converted to Word 2013 format or later (due to changes of how cell margins are handled).

Bottom-left part of Save As dialog box — turn off Maintain compatibility with previous versions of Word to convert the document to your version of Word. This allows newer features to be used.

How to remove resolved comments in Word

Word does not have a built-in feature for removing all resolved comments in one operation. You need to go through all the resolved comments and delete them one by one.

Note that the DocTools CommentManager add-in lets you delete all resolved comments with the click of a button. For details, see How to delete resolved comments in Word.

Where does the name in an inserted Word comment come from?

The author name shown in an inserted comment is the name currently specified for the user in File > Options > General > User Name. See Figure 4B below.

If you have selected to show comments and revisions inline in the document, Word shows initials in the comment reference. The initials are the ones currently specified for the user in File > Options > General > Initials. See Figure 4B below.

You can also get access to the user name and initials via the Track Changes Options dialog box. To open that dialog box, click the small arrow (dialog box launcher) in the bottom-right corner of Review tab > Tracking group.

Figure 4A. You can get access to the user name and initials settings via the Change User Name button in the Track Changes Options dialog box. See the illustration below.

Figure 4B. The User Name and Initials settings in Word Options > General.

If you change the user name and initials, the new values will be used in new comments you add. It will not change the name and initials in existing comments.

The currently defined user name and initials are also used in insertions, deletions, and formatting changes made while track changes is turned on.

How to remove name from comments in word

Word’s comment functionality does not include functionality for changing the author name of existing comments. However, Word lets you remove personal information which will set the author name of all comments to «Author». See How to remove personal information from comments. See also the macro solution later in this article.

Note that the DocTools CommentManager add-in lets you easily change the user name and initials, also in existing comments. The command Change Author Names in Existing Comments lets you change all names or only a specific name of your choice. For example, this feature can be used to change author names to the company name before sharing a document with external people or to correct a misspelled or otherwise wrong user name. If you want to remove the name from comments, you can use the command to set the name to e.g. a non-breaking space (Ctrl+Shift+Spacebar), a hyphen or an En dash. See also the information below about a feature in the DocTools ExtractChanges Pro add-in that lets you do even more and that handles both tracked changes and comments.

The DocTools ExtractChanges Pro add-in (from version 6.0) includes a command, Change Author & Date, that lets you change the name in existing tracked changes and comments. In addition, the command lets you remove or change the date of the tracked changes and comments. You can select whether the name and/or date changes are to be applied to all tracked changes and comments or only tracked changes and comments added by a specific author. The changes are made in copy of the document so that the original document remains unchanged.

TIP: If you want to remove the name from tracked changes and comments, you can type e.g. a non-breaking space (Ctrl+Shift+Spacebar), a hyphen or an En dash as both the author name and initials in the Change Author & Date dialog box in DocTools ExtractChanges Pro.

How do dates in Word comments work?

Word shows date and time information on a comment in the following situations:

When a comment is selected in the balloon area
When you hover the mouse over a comment in the balloon area
When you hover the mouse over a comment mark on a page if no balloons are shown
Above each comment in the Reviewing Pane

The date and time tell when the comment was added.

Is it possible to change the date of a comment in Word?

The date assigned to a comment in Word cannot be changed. Also, you cannot change the way that date and time information is shown. See below for details.

Language of date and time information in comments

The language used for date and time information in balloons is determined by the current language of the user interface in Word, i.e. the language used in Ribbon, dialog boxes, etc. This also means that weekdays and month names are written in the language of the user interface. If you change that language, the date and time information will automatically change too.

The date format shown in balloons seems to always follow English (US) syntax no matter the language and even if it is not a normal date syntax in the actual language:

[month name] [day], [year]
Example: March 21, 2018

About comment date and time information shown in the balloon area

The date and time information for comments in the balloons is not always given as date and time – you will see text descriptions instead. As time goes, the date and time information for a comment in the balloon area will change. The information shown follows the order described below – text shown as you will see it in English versions of Word:

First 24 hours
A few seconds ago
2 minutes ago
3 minutes ago
…
59 minutes ago
60 minutes ago
1 hour ago
2 hours ago
…
23 hours ago
24 hours ago

Next six days
Yesterday

The next days, until 1 week after adding the comment: the actual weekday, e.g. Wednesday, Thursday. Weekday names seem to be shown in the language set in the regional settings in Windows.

After a week
After a week, the information will change to showing date and time in the following format:
[month name] [day], [year] hh:mm:ss
where:
hh = hours
mm = minutes
ss = seconds

You may see time given with AM/PM values.

As explained above, the month name will be in the language of the user interface and the syntax follows English (US) rules even if not in English:

Examples:

English user interface: March 21, 2019 14:55:35
German user interface: März 21, 2019 14:55:35
Danish user interface: marts 21, 2019 14:55:35

The CommentManager add-in makes it fast and easy to get an overview of all comments in a Word document, using the Review Comments command. This also includes date and time information.

How to show comments in Word

Comments in Word can be displayed in different ways:

In balloons (see OPTION 1 below)
In the Reviewing Pane (see OPTION 2 below)
In screen tips only (see OPTION 3 below)

OPTION 1 – How to show comments in balloons

The document must be in Print Layout view (Alt+Ctrl+P) to show comments in balloons.

Select the Review tab in the Ribbon.
In the Tracking group, click Show Markup > Balloons and select Show Revisions in Balloons or Show Only Comments and Formatting in Balloons as desired. See Figure 6 below.

Figure 6. How to show comments in balloons in Word. Select one of the options marked by colored frame.

Figure 7. The Markup Area or Balloon Area is shown in the left or right margin depending on your settings. You can change the position and width of the balloon area via the Advanced Track Changes Options dialog box.

OPTION 2 – How to show comments in the Reviewing Pane

You can show the Reviewing Pane in any view except Read Mode.

Select the Review tab in the Ribbon.
In the Tracking group, click Reviewing Pane.
From the menu, select Reviewing Pane Vertical or Reviewing Pane Horizontal depending on how you want the pane to be shown.

You can close the Reviewing Pane again by clicking the X in top-right corner of the pane.

OPTION 3 – How to show comments in screen tips

To use this method, all revisions must be shown inline. This means that the following option must be selected: Review tab > Tracking group > Show Markup > Balloons > Show All Revisions Inline. See the second option in Figure 6 above.

Hover the mouse over a comment reference, i.e. the initials and number shown where a comment has been inserted.
A screen tip will appear, showing the comment text. See Figure 8 below.

NOTE: If no screen tip appears when you hover the mouse over the comment reference, try to move the mouse a bit. If the screen tip does not appear, the problem is most likely that display of screen tips is turned off. To turn it on, select File > Options > Display > turn on Show document tooltips on hover.

Figure 8. Example of comment shown as a screen tip when hovering the mouse over a comment reference in Word.

The DocTools CommentManager add-in includes special tools that make it faster to work with comments. For example, the Review Comments command opens a dialog box that works as a control center from where you can view, edit, delete, search comments and more.

How to show only specific comments in Word

Show comments by a specific author only

In Word documents with many comments, it may sometimes be helpful to see only a subset of the comments. Word lets you show/hide comments by author.

To show only comments added by a specific author:

Select Review tab > Tracking group > Show Markup > Specific People: Deselect all authors except the author(s) whose comments you want to see.

This does not remove any comments – it only hides some comments temporarily.

How to hide resolved comments in Word

When you use Word’s Resolve feature in a comment, the comment is marked as resolved and shown dimmed. However, the comment remains in the document until you delete it.

You may be interested in keeping the resolved comments in the document until all comments have been handled. However, you may want to hide the resolved comments, so they do not distract you while resolving the rest of the comments.

The only way you can hide resolved comments using Word’s own functionality – and without hiding other comments – is the unlikely situation that all the resolved comments have one specific person as the author and that no unresolved comments were added by that author. In that situation, you could deselect that author in Review > Tracking group: Show Markup > Specific People. Except from that, you are out of luck.

If you are using Word for Microsoft 365 and if your version has switched to «modern comments» functionality instead of «classic comments», resolved comments will not appear in the margin but they are still shown in the Comments pane.

Note that the DocTools CommentManager add-in provides methods to quickly hide all resolved comments. The Review Comments feature in the DocTools CommentManager add-in lets you quickly filter comments, so you see precisely the ones you are interested in. This way, you can quickly hide all resolved comments. In addition, the add-in lets you export all comments to Excel where they will be listed with all metadata and with filter applied to every column, making it easy to filter so you see only unresolved comments.

What to do if you cannot see the comments

Comments can be set to not be displayed. The same is true for revisions made using track changes. If you know the document contains comments but you can’t see them, follow CHECK 1, CHECK 2, and CHECK 3 below.

CHECK 1 – Check that markup is selected to be shown

Select the Review tab in the Ribbon.
In the Tracking group, make sure that Display for Review has been set to All Markup or Simple Markup. See the illustration below.

Figure 9. To see comments, make sure that All Markup or Simple Markup is selected.

CHECK 2 – Check that comments are selected to be shown

If comments are not shown after you followed CHECK 1:

Select the Review tab in the Ribbon.
In the Tracking group, make sure that Comments is checked in the Show Markup menu. See Figure 10 below.

Figure 10. To see comments, make sure that Comments is checked in the Show Markup menu.

CHECK 3 – What to do if you only see comment icons in the balloon area – or how the Show Comments command works

Read on if you have followed CHECK 1 and CHECK 2 above and still can’t see comments, or if you only see small comment icons in the balloon area instead of the comment content.

You may have noticed that the Comments group in the Review tab includes a command named Show Comments. You may also have noticed that the command is not always enabled so you can use it – in some situations, the Show Comments is grayed out/disabled. Here is the reason why:

The Show Comments command is only enabled when Simple Markup is selected. Also, Comments must be checked in the Show Markup menu. See Figures 11A and 11B below.
If Display for Review is set to show Simple Markup, the Show Comments command toggles between two states:
State 1: Comment icons are shown in the margin (see Figure 12 below)
State 2: Full comments are shown in the balloon area
NOTE: If comments are not shown beforehand, the first click on Show Comments will switch to state 1, i.e. showing comment icons.

Figure 11A. The Show Comments command grayed out. To enable it, you must select Simple Markup instead of any other Display for Review option.

Figure 11B. The Show Comments command is only enabled when Simple Markup is selected.

Figure 12. Comment icons are shown in the margin if Simple Markup is selected.

Figure 13. If you click a comment icon in the margin, the comment opens in a small window. You can drag the comment window to the position you want. You can also resize the window by dragging an edge or corner. To close it, click the X or simply click anywhere outside the comment window.

TIP: If comment icons are shown as illustrated in Figure 12 above, the commented text in the document is not marked in any way. This means that you cannot see precisely what the comment refers to. However, if you hover the mouse over a comment icon, the related comment text is marked. If you happen to hover the mouse over commented text, that text will be colored and a screen tip with comment information is shown in the same way as illustrated in Figure 8 above.

A comment plus all replies to the comment, if any, will appear as only one comment icon in the margin. When you click a comment icon, the first-level comment and all replies to it, if any, will appear in the small comment window that opens.

What happens if you copy and paste content that contains comments?

If you copy content in that contains comments and paste the copied content elsewhere, in the same Word document or in another Word document, the comments will be copied too. The pasted comments will not be linked to the original comments – they keep the author names, time stamps and content from the original comments but they are independent comments.

If you paste the copied content as plain text, without formatting, the comments will not be included.

How to remove comments in Word

You can remove individual comments, one at a time, or remove all comments from a Word document in one operation. In Word, the term «delete» is used instead of «remove». Therefore, I have used «delete» in the following.

If you delete a comment that has replies, all replies to the comment will be deleted too.
If you delete a reply to a comment, only that reply will be deleted.

How to delete a single comment

Make sure the comment is displayed. Click in the comment text of the comment to be deleted.
On the Review tab in the Ribbon, in the Comments group, click Delete > Delete.
Note that the command is disabled if only comment icons are shown.
Repeat steps 1-2 to delete more comments, if relevant.

How to delete all comments from the document

On the Review tab in the Ribbon, in the Comments group, click Delete > Delete all Comments in Document.

How to delete all comments that are currently visible

Via the Review tab > Tracking group > Show Markup > Specific People, you can turn off the display of comments and revisions made by specific people. Thereby, only comments and revisions made by the people checked in the list will be shown in the document.

To delete all comments added by the people currently checked in the Specific People list:

On the Review tab in the Ribbon, in the Comments group, click Delete > Delete all Comments Shown.

When you delete comments in Word, the commented text (comment scope) is preserved. Only the comment(s) are removed. This means that the text in the document that the comment(s) referred to, i.e. the text that was selected when the comment(s) were inserted, is still in the document.

Note that the DocTools CommentManager add-in lets you move a comment, i.e. change which text the comment is related to. DocTools CommentManager also lets you select text in the document and convert it to a comment. This will remove the selection from the document and insert it in a new comment instead. This is practical in a number of situations. The feature is practical if some comments were originally written as part of the document text. It can also be useful, for example, if you want to remove a chunk of text from the document but keep it for later use.

How to delete resolved comments

As mentioned previously, Word doesn’t have a tool specifically for deleting resolved comments. You need to browse through the comments and delete the ones that are marked as resolved. Make sure comments are shown in balloons. You can use the Next or Previous commands on the Review tab to browse through the comments and delete individual comments as needed.

How to delete all resolved comments in Word

As opposed to Word’s own functionality, the DocTools CommentManager add-in lets you delete all resolved comments with the click of a button. You will find a command, Delete All Resolved Comments, for getting rid of all comments that have been marked as resolved.

If you want to review the resolved comments before deleting them, DocTools CommentManager offers another practical feature. You can use the filter feature in the Review Comments dialog box to show only resolved comments (type » yes » in the filter field). You can then quickly step through the resolved comments and use the Delete Comment button to remove the ones you want to get rid of.

How to hide comments in Word

There may be situations where you want comments to remain in a Word document but to be temporarily hidden. To hide comments (without deleting them), follow one of the methods below.

METHOD 1 – Hide comments only but keep any changes marked as tracked changes visible

Select the Review tab in the Ribbon.
In the Tracking group, remove the check mark from Show Markup > Comments.

METHOD 2 – Hide comments and any tracked changes

Select the Review tab in the Ribbon.
In the Tracking group, select Display for Review > No Markup.
This will show the document as if all comments have been deleted and all revisions accepted.
The comments and revisions are still in the document but hidden.

Figure 14. Select No Markup to show the document without comments and tracked changes.

Note that in relation to comments, you may select Original instead of No Markup since this will also hide comments. However, in relation to tracked changes, there is a big difference between the two options: No Markup will show the document as if all tracked changes have been accepted whereas Original will show the document as if all tracked changes have been rejected.

Note that hiding comments and tracked changes only determines how your document is shown right now. The display settings are not stored in the document. If you send the document to another user, it is that user’s settings that apply.

How to print without comments in Word

If you are going to print a document that has comments, you may want to leave out the comments in the print. To obtain this, you can follow METHOD 1 or METHOD 2 below.

METHOD 1

Select the Review tab in the Ribbon.
In the Tracking group > Show Markup, turn off
Comments.

If the document also includes tracked changes and if you want to avoid printing those changes, turn off Insertions and Deletions and Formatting too.
Select the desired printer and click Print.
If you want, turn on Review tab > Tracking group > Show Markup > Comments again.

METHOD 2

Select File > Print.
Under Settings, click on the arrow next to Print All Pages (see (1) in Figure 15 below).
Turn off Print Markup (see (2) in Figure 15 below).
Click the Print button.

Figure 15. Part of the Print dialog box. To print without comments and other markup, turn off Print Markup.

How to print only the comments in Word

If you want to print comments only, without the content of the document, follow these steps:

Select the Review tab in the Ribbon.
In the Tracking group > Show Markup menu, turn on Comments.
If the document includes tracked changes, turn off Insertions and Deletions and Formatting unless you want to also print those changes.
Select File > Print.
Under Settings, click the topmost menu (shows Print All Pages by default), select List of Markup.
Select the desired printer and click Print.

Note that the DocTools CommentManager add-in lets you extract comments to either Word or Excel. A printout of an extract document will give you a far better overview of the comments.

How to browse comments in Word

You can step through the comments in a Word document.

Select the Review tab in the Ribbon.
To go to the next comment, click Next in the Comments group
To go to the previous comment, click Previous in the Comments group.

Alternative methods for browsing comments

You can browse comments from the Navigation Pane (View tab > Navigation Pane > click the search icon > select Comments).
You can browse comments using the Go To tab in the Find and Replace dialog box. Press Ctrl+G to open the dialog box. In the Go to what list, select Comment. Then use the buttons in the dialog box to browse comments.

How to get an overview of all comments in a Word document

Word does not include a tool that gives you a good overview of all comments. You can browse comments but you cannot see all comments at a time.

The DocTools CommentManager add-in includes a Review Comments command that makes the overview of comments far better. The command opens a dialog box from where you can manage all comments in the document. The dialog box also lets you rank comments by importance.

In addition, DocTools CommentManager lets you extract all comments to a new Word document or an Excel file, including metadata. You will also find tools to quickly find a specific comment in the original source document.

How to change the formatting of comments in Word?

In Word, styles are used to manage the formatting of text. A style in Word is a set of formatting characteristics that determine font and font size, color, alignment, spacing, etc. In relation to comments, Word uses a set of styles dedicated to comments. You can modify the comment styles to change the formatting of comments. Read on below to learn about the comment styles and how they work.

Comment styles in Word

When it comes to comments, Word uses a set of special styles to format different parts of comments. Word has four built-in styles related to comments:

Comment Text
Comment Reference
Comment Subject
Balloon Text

See how to find the comment styles names in your version of Word if it is not English.

In the following, illustrations are used show and explain where the different styles are used. Note that there are some oddities in relation to the comment styles – as you will see, not everything works as expected if modifying the comment styles.

Where are the different comment styles used?

Used for the comment text typed by users. The style is used both for comments shown in balloons and comments shown in the Reviewing Pane. See Figure 16 and Figure 17 below (red text).

Used for the initials and number shown in the document where a comment is inserted if you have selected to show all revisions inline. See Figure 16 and Figure 18 below (green text).

This style can be used for a heading in comments and may be intended for that. Note that the style is not automatically applied by Word anywhere.

Used for e.g. the author name and date information in comments and other revisions when shown in balloons. The style is also used for showing text like Deleted and Formatted + formatting info in relation to tracked changes.

This style is only used in balloons and not in the Revision Pane. See Figure 16 and Figure 17 below (red text).

How to find the names of comment styles in non-English versions of Word

The names of comment styles and other built-in styles in Word are language-specific. The styles are named in the language of the user-interface of your version of Word.

For help on finding the comment style names in the language of your version of Word, see my articles:

Create List of Local Built-in Style Names
Word Style Names in English, Danish, German, French

Below, you will find the four comment styles listed with names in English, Danish, German, and French.

English	Danish	German	French
Comment Text	Kommentartekst	Kommentartext	Commentaire
Comment Reference	Kommentarhenvisning	Kommentarzeichen	Marque de commentaire
Comment Subject	Kommentaremne	Kommentarthema	Object du commentaire
Balloon Text	Markeringsbobletekst	Sprechblasentext	Texte de bulles

To make it easy to see where the different comment styles are used by Word, I have modified the comment styles as follows before making the illustrations below:

Figure 16. Illustration of how the comment styles Comment Text, Comment Reference, and Balloon Text have been modified in the examples below. The style Comment Subject is not used by Word and therefore not included in the illustrations.

In Figure 17 below, comments and revisions have been added and re shown in the balloon area:

Figure 17. Balloon area with examples of comment and revisions. Note that the style Balloon Text is used for name, date/time info, and revision info. If you compare with Figure 16, you can see that name and revision info is bold even it the style Balloon Text is not defined as bold.

Figure 18. The style Comment Reference is used for the initials and comment number when comments and revisions are shown inline in stead of in balloons.

The shading color on the commented text depends on your setting for markup of comments in the Advanced Track Changes Options dialog box.

Learn more about the Advanced Track Changes Options dialog box.

Oddities in relation to comment styles in Word

Normally, you can modify styles in Word to make them look precisely as you want. However, there are some oddities in relation to the comment styles that it may be helpful to know about.

You may experience that some types of modifications you make to a comment style don’t have any effect when comments are shown in balloons. This is most likely a result of what Microsoft refers to as “by design”. The behavior isn’t always logical.

If you examine Figures 17-18 above and compare them with Figure 16, you will see that:

If you apply another font or font color to the comment styles, the changes will take effect in comments (i.e. normal style behavior).
The name and revision information (blue text in Figures 16-18 above) seem to always be bold even if the style Balloon Text is not defined as bold. On the other hand, time information and formatting information appear with the Balloon Text style in the way it is defined (see style information in Figure 16 above).
As opposed to the Balloon Text style, adding bold to the Comment Text style works «normally», i.e. it the comment text appears bold or not bold according to the style definition.
Adding italic or underline to the style definitions of Balloon Text and Comment Text also works «normally», i.e. it makes the corresponding text appear italic/not italic and underlined/not underlined.
The comment text (red in Figures 16-18 above) appear with the font and color defined in the Comment Text style. However, the font size of the comment text is determined by the font size defined for the Balloon Text style. Changing the font size of the Comment Text style has no effect. You can see that the comment text in Figure 17 is larger than in Figure 16 – the font size is inherited from the Balloon Text style. This means that you must modify the style Balloon Text instead of the style Comment Text if you want to make the comment text larger or smaller.
If you click in the comment text of a comment and check which font size is shown, e.g. in the Font group of the Home tab in the Ribbon, you will see that it shows the font size defined in the Comment Text style and not the actual font size.
Most of the settings you can apply to styles via the Paragraph dialog box have no effect on the Balloon Text and Comment Text styles. Word does not prevent you from applying indentation, space before, space after, etc. However, it does not change the way the comments look. Note, however, that some paragraph settings applied to the style Comment Text will take effect if comments are shown in the Reviewing Pane and not in balloons.
Adding bold, italic or underline to the style definition of Balloon Text and Comment Text does change the way the comments look.

How to change the font size of comments in Word by modifying the Balloon Text style

As already mentioned above, the steps to change the font size of comments in Word are not logical. Since it may be one of the changes most users want to make in relation to the display of comments, I have included the steps with some extra tips here.

As explained above, the style Comment Text is used for comment text entered by users. Normally, you can change the font size of text by modifying the font size of the style in use. However, this does not work for the Comment Text style.

To change the font size of comments in Word via styles, you must change the font size in the style Balloon Text! Changing the font size of the style Comment Text has no effect.

I suggest the following steps as an easy way to get access to modify the Balloon Text style:

Press Ctrl+Shift+S to open the Apply Styles window.
In the Style Name field, type «Balloon Text» (without the quotation marks).
IMPORTANT: In case of a non-English version of Word, you must type the localized style name used in your version of Word instead of «Balloon Text». See the help above.
Click Modify to open the Modify Style dialog box, showing the current definition of the Balloon Text style,
Change the font size and make other modifications as desired. Click OK when finished.

Figure 19. Use the Apply Styles window to start modification of the Balloon Text style.

The DocTools CommentManager add-in gives you easy access to modify any of the comment styles. DocTools CommentManager lets you do everything you can using Word’s own comment features plus a lot more.

How are the comment styles defined by default?

Figure 20. Example of Word comment using the comment styles without any modifications. For details about the default comment style settings, see below.

Style: Comment Text

Style type:

Style based on:

Font:

Font size:

Alignment:

Indentation:

Spacing:

Line Spacing:

Linked (paragraph and character)

Normal
Calibri
10 pt
Left
Left 0, Right 0
Before 0 pt, After 8 pt (NOTE: the spading has no effect)
Single

Style: Comment Reference

Style type:

Font:

Font size:

Character

Default Paragraph Font, i.e. the font in use where the reference is inserted
8 pt

Style: Comment Subject

Style type:

Style based on:

Font:

Font size:

Alignment:

Indentation:

Spacing:

Line Spacing:

Linked (paragraph and character)

Comment Text
Calibri, Bold
10 pt
Left
Left 0, Right 0
Before 0 pt, After 0 pt
Single

Style: Balloon Text

Style type:

Style based on:

Font:

Font size:

Alignment:

Indentation:

Spacing:

Line Spacing:

Linked (paragraph and character)

Normal
Segoe UI – the font used by default in the user interface of Word
9 pt
Left
Left 0, Right 0
Before 0 pt, After 0 pt
Single

How to remove personal information from comments

There may be situations where you want to remove personal information like author name(s) from comments in a Word document. For example, this may be the case if the Word document is to be shared with external people. Below, you will find two methods.

METHOD 1 – How to remove personal information using the Document Inspector

Word has a built-in feature you may use. However, the method may remove more information than you like. See the warning below before you use this method.

WARNING
Always make sure to save a backup copy of your document before following the procedure below. The procedure may remove data that cannot be restored.

The method removes all custom document properties and empties the built-in properties (Title, Author, Company, etc.). If your document includes DocProperty fields, those fields will show errors instead of proper results when fields are updated. However, if you lock or unlink the DocProperty fields beforehand, you can preserve the field results.

If you have the DocTools DocPropertyManager add-in, you can export custom document properties before removing personal information. You can re-import the properties again afterwards, if needed. You can also import the custom document properties directly from your backup copy of the original document. Learn more about DocTools DocPropertyManager.

To remove personal information from a document:

Select File > Info.
Click Check for Issues > Inspect Document. See Figure 21 below.
In the Document Inspector dialog box, turn off all options except Document Properties and Personal Information. See Figure 22 below.
Click Inspect.
In the next dialog box that opens, click Remove All. See Figure 23 below.
Click Close.
Save the document.

Once the document has been saved, the author name in all comments will be changed to «Author» and the initials to «A» if comments are shown inline.

If you insert new comments, you will first see the actual user name but as soon as you save the document, it will be replaced by «Author». On the other hand, new property values or custom document properties you add will remain in the document unless you repeat the steps above.

Note that the terms used for author and initials are language-specific and will match the language of your Word. For example, «Forfatter» and «F» will be used in case of Danish.

Figure 21. Select File > Info > Check for Issues > Select File > Info > Check for Issues > Inspect Document to open the Document Inspector dialog box.

Figure 22. The Document Inspector dialog box. Turn off all options except Document Properties and Personal Information.

Figure 23. Click Remove All in the Document Inspector dialog box to remove the information. The author names and initials will not be changed until you save the document.

METHOD 2 – How to remove personal information from comments using a macro (VBA)

You can use a macro (VBA) to change the author name(s) and initials in comments to other values. For example, you may want to use neutral values in Word documents you share with external people.

The macro below will handle all comments in the active document. The macro:

changes the author name in all comments to «Neutral Name»
changes the initials in all comments to «NN»

Change the values in the macro as desired before running the macro.

If you add new comments, you will have to run the macro again to change them too.

Always make sure to save a backup copy of your document before you change the author names.

Sub WordComments_ChangeAuthorNames_AllComments()
    Dim oComment As Comment
    
    'Iterate through comments
    'Replace author name and initials with "Neutral Name" and "NN"
    '=========================
    'NOTE: Replace the names below with relevant values
    '=========================

    For Each oComment In ActiveDocument.Comments
        With oComment
            .Author = "Neutral Name"
            .Initial = "NN"
        End With
    Next oComment
    
    'Show message
    MsgBox "Finished changing author name and initials in " & _
        ActiveDocument.Comments.Count & " comments.", _
        vbOKOnly, "Change Author Names in All Comments"
End Sub

The DocTools CommentManager add-in lets you easily change author names and initials in all comments or in only comment by a specific author. For example, you can quickly change all author names to the company name if you are going to share a document with external people.

How to stop Word from changing the author of comments to «Author»

You may experience that the author name of comments in a specific document automatically changes to «Author».

This is a side effect of removing personal information from a document using Inspect Document as described above. Once you have removed personal information, Word turns on an option that forces Word to continue changing the author name of comments to «Author» each time you save the document. To stop Word from changing the author name to «Author», please refer to the detailed description about this issue in my article «Track Changes in Word – how it works».

Numbering of comments in Word

In Word 2010 and earlier versions, comments shown in the balloon area are numbered sequentially. It is practical to be able to refer to comment numbers, especially in documents with many comments.

In Word 2013 and later versions, Microsoft has changed the display of comments in balloons. The comments are no longer numbered when shown in balloons. As explained above, the style Comment Text is automatically applied to the comment text you enter. As a workaround, you may modify the style Comment Text to be numbered (for help on setting up numbering, see Shauna Kelly’s article). However, if you add numbers to the Comment Text and write comments with more than one paragraph, each paragraph will be numbered and thereby result is misleading numbering.

You can have sequential comment numbers displayed in the comment references if to display revisions inline in the document. Apply the following settings:

Review tab > Tracking group > Display for Review: All Markup
Review tab > Tracking group > Show Markup > Balloons > Show All Revisions Inline

More options for managing the display in balloons

In the Advanced Track Changes Options dialog box, you can make further settings for balloons. The dialog box has options for both comments and revisions, i.e. insertions, deletions and formatting changes marked as tracked changes.

How to open the Advanced Track Changes Options dialog box

To open the Advanced Track Changes Options dialog box:

Select the Review tab in the Ribbon.
Click the dialog box launcher in the Tracking group. See Figure 24 below.
This opens the Track Changes Options dialog box.
Click the Advanced Options button to open the Advanced
Track Changes Options dialog box. See Figure 25 below.

Figure 24. On the Review tab, click the dialog box launcher in the Tracking group to open the Track Changes Options dialog box.

Figure 25. The Advanced Track Changes Options dialog box. The colored frames mark the options related to comments. See the descriptions below for details about how the options work.

The DocTools CommentManager add-in lets you opens the Advanced Track Changes Options more easily. In general, you can do everything in relation to comments faster and easier with DocTools CommentManager than you can using Word’s own comment tools. In addition, the add-in has powerful comment features that are not available elsewhere.

Comments and colors in balloons

See Figure 25 above, first colored frame.

In the Markup group, the Comments drop-down list lets you select the color to use for comments. Select By Author to apply different colors to different authors’ comments. The colors will be selected by Word and cannot be defined by you. Up to 20 different colors can be in use. Note that the same author may not always be applied the same color. Select a specific color to use that color for all comments regardless of the author.

Balloon area location and width

See Figure 25 above, second colored frame.

In the Balloons group, you can define the width of the balloon area in the Preferred width field and associated Measure in field. The width seems to be measured from the position of the vertical bars that are added and to the edge of the page. The vertical bars are shown in the left or right side of the page, next to lines that contain tracked changes.

The Margin option lets you position the balloons in the left or right side of pages.

The Show lines connecting to text check box lets you turn on/off lines that go from a comment to the commented text (comment scope) in the document. Comment lines are dotted but if the selection is in a comment, the related comment connection line will be a fully drawn line.

Related information

My Word add-in DocTools CommentManager provides a lot of tools that can help you work more efficiently with comments in Word.

This article has explained how add comments in Word, how to remove comments in Word, print without comments, change font size of comments and a lot more. I hope this article helps you in your future work with comments in Word.

Источник

To add a comment to something in Word, simply:

Select the text (or object) you want to comment on.
Navigate to the Review tab.
Click New Comment.
Write your comment.

Contents

1 How do I add comments to my work?
2 How do you add a comment to a line in Word?
3 How do you display comments?
4 How can we add comments to the changes made Class 10?
5 Why can’t I add comments in Word?
6 How do you paste comments in Word?
7 How do I show comments in Word?
8 How do you show comments in Word?
9 Can we add comments to the changes made?
10 How do I edit comments in Word?
11 What is the purpose of adding comments in Calc class 10?
12 How can I add comments to a PDF?
13 How do you insert a comment in HTML?
14 Why can’t I add a comment in track changes?
15 How do you copy comments?
16 How do you add a comment in Excel?
17 What is the purpose of adding comments?
18 How do you insert notes in Word?
19 How do you add comments in Google Docs?
20 How do you review comments in Word?

Work

Introduction.
1Select the chunk of text you want to comment on.
2On the Review tab, click the New Comment button in the Comments group.
3Type your comment.
4Click the mouse back in your text or press the Esc key to stop typing the comment.
5Click the Reviewing Pane button to see the comments.

Insert comments in a document

To add a new comment in Reading View, select the text you want to add a comment about, and then click Comments > New Comment.
To view comments in Edit View, click Review > Show Comments.
To add a new comment, click Review > New Comment.

To view all comments, no matter which document view is chosen, summon the Reviewing pane: Click the Review tab, and in the Tracking group, click the Reviewing Pane button. Choose either the horizontal or vertical display to summon the Reviewing pane and peruse comments as well as text revisions.

Q6. How can we add comments to the changes made?

Make the change to the spreadsheet.
Select the cell with the change.
Choose Edit > Changes > Comments. The automatically-added comment provided by Calc appears in the title bar of this dialog and cannot be edited.
Type your own comment and click OK.

Word won’t allow you to add comments to text within a text box, as you can to regular text in your document.The first is to work around it by just adding hidden text in the text box. You can make the hidden text visible or invisible, as the need arises.

Open a new Word file or an existing Word file where you would like to paste the comments. 11. Insert your cursor into the newly opened file and select Ctrl + V to paste all the comments. Alternately, you can right-click in the newly opened file and then select Paste.

Find the “Review” tab, select the “Tracking” group, and click on “Show Markup”. Rest your pointer on Balloons, and then select “Show All Revisions inline” to display comments inline and deletions with strikethroughs. Rest your pointer on a comment inside the document. The comment will appear in a ScreenTip.

How to show all comment lines in your Word Document

Open the Word document.
In the toolbar, click Review.
Find and click Tracking.
Tick All Markups.

Choose Edit > Changes > Comments. The dialog shown below appears. The automatically-added comment provided by Calc appears in the title bar of this dialog and cannot be edited. Type your own comment and click OK.

How to edit a comment in Microsoft Word documents

Open the Word document.
Make all comments visible.
Click in the comment.
Edit the text for that comment.
Click out of the comment to save changes.

Answer: Calc automatically adds to any recorded change a comment describing what was changed (for example, Cell B4 changed from ‘9’ to ‘4’). Reviewers and authors can add their comments to explain their changes.

Add a line, arrow, or shape

Choose Tools > Comment.
Draw in the PDF:
To edit or resize the markup, select it and drag one of the handles to make your adjustments.
To add a pop-up note to the markup, select the Hand tool, and double-click the markup.
(Optional) Click the close button in the pop-up note.

To write HTML comments put <! — and —> at either end of the comment. HTML comments are notes to keep HTML code organized and are ignored by the browser.

Track Changes is turned on but you’re working in the Final mode of the document (in other words, you can’t see the balloons etc. for the tracked changes). You want to add a comment to the author so you click the Comment icon.

To copy a comment, follow these steps:

Make sure you are viewing your document in Draft view.
Highlight the comment mark in your document.
Press Ctrl+C. The comment mark and the associated comment are copied to the Clipboard.
Position the insertion point at the location where you want to copy the comment.
Press Ctrl+V.

Insert simple notes for annotation purposes

Right-click the cell and then click Insert Comment (or press Shift+F2). If you’re using Excel for Office 365, right-click the cell and choose New Note.
Type your annotation text.
Click outside the cell.

In computer programming, a comment is a programmer-readable explanation or annotation in the source code of a computer program. They are added with the purpose of making the source code easier for humans to understand, and are generally ignored by compilers and interpreters.

How do you insert notes in Word?

Insert a Comment

Select the text you want to add a comment to.
Click the Review tab.
Click the New Comment button in the Comments group. Right-click in the document and select New Comment.
Type your comment, then click outside the comment box when you’re finished.

Add, edit, view, filter or delete comments

On your computer, open a document, spreadsheet, or presentation.
Highlight the text, images, cells, or slides you want to comment on.
To add a comment, in the toolbar, click Add comment .
Type your comment.
Click Comment.

Try it!

Select Review > Display for Review.
Select the option you want: Simple Markup points out where changes are made with a red line in the margin. All Markup shows all edits with different colors of text and lines.
In the Show Markup list, select the types of revisions you’d like to see: Comments.

Источник