Selection goto vba word

expression.GoTo(What, Which, Count, Name)

expression    Required. An expression that returns one of the objects in the Applies To list.

What   Optional Variant. The kind of item to which the range or selection is moved. Can be one of the WdGoToItem
constants.

Which   Optional Variant. The item to which the range or selection is moved. Can be one of the WdGoToDirection
constants. The following examples are functionally equivalent; they both move the selection to the first heading in the document.

Selection.GoTo What:=wdGoToHeading, Which:=wdGoToFirst
Selection.GoTo What:=wdGoToHeading, Which:=wdGoToAbsolute, Count:=1
		

Count   Optional Variant. The number of the item in the document. The default value is 1. The following example moves the selection to the fourth line in the document.

Selection.GoTo What:=wdGoToLine, Which:=wdGoToAbsolute, Count:=4
		

Only positive values are valid. To specify an item that precedes the range or selection, use wdGoToPrevious as the Which argument and specify a Count value. The following example moves the selection up two lines.

Selection.GoTo What:=wdGoToLine, Which:=wdGoToPrevious, Count:=2
		

Name   Optional Variant. If the What argument is wdGoToBookmark, wdGoToComment, wdGoToField, or wdGoToObject, this argument specifies a name. The following example moves to the next DATE field.

Selection.GoTo What:=wdGoToField, Name:="Date"
		

Remarks

When you use the GoTo method with the wdGoToGrammaticalError, wdGoToProofreadingError, or wdGoToSpellingError constant, the Range that’s returned includes any grammar error text or spelling error text.

Example

This example moves the selection to the first cell in the next table.

Selection.GoTo What:=wdGoToTable, Which:=wdGoToNext
		

This example moves the insertion point just before the fifth endnote reference mark in the active document.

If ActiveDocument.Endnotes.Count >= 5 Then
    Selection.GoTo What:=wdGoToEndnote, _
        Which:=wdGoToAbsolute, Count:=5
End If
		

This example sets R1 equal to the first footnote reference mark in the active document.

If ActiveDocument.Footnotes.Count >= 1 Then
    Set R1 = ActiveDocument.GoTo(What:=wdGoToFootnote, _
        Which:=wdGoToFirst)
    R1.Expand Unit:=wdCharacter
End If
		

This example moves the selection down four lines.

Selection.GoTo What:=wdGoToLine, Which:=wdGoToRelative, Count:=4
		

This example moves the selection back two pages.

Selection.GoTo What:=wdGoToPage, Which:=wdGoToPrevious, Count:=2
		

Welcome to our Word VBA / Macros Mega-Guide!

This page contains:

1. 1. Word VBA Tutorial PDF (Free Download)
   2. Word VBA “Cheat Sheet” containing a list of the most commonly used Word VBA code snippets
   3. Full Word VBA / Macro tutorial.
   4. Searchable list of all of our Word VBA Macro Tutorials

You might also be interested in our Interactive VBA Tutorial for Excel.  While some of the examples / exercises are specific to Excel VBA, much of the content is generic to all VBA and you may find it useful to learn concepts like If Statements, Loops, MessageBoxes, and more.

---

VBA PDF (Free Downloads)

Download our free Microsoft Word VBA Tutorial! Or VBA Tutorials for other Office Programs!

Download

---

Word VBA Examples “CheatSheet”

Below you will find simple VBA code examples for working with Microsoft Word.

Select / Go To

Return to Top

Bookmarks

Return to Top

Document

Return to Top

Columns

Return to Top

VBA Coding Made Easy

Stop searching for VBA code online. Learn more about AutoMacro — A VBA Code Builder that allows beginners to code procedures from scratch with minimal coding knowledge and with many time-saving features for all users!

Learn More

Font

Return to Top

Insert

Return to Top

Loops

Return to Top

VBA Programming | Code Generator does work for you!

Paragraph

Return to Top

Word VBA Macro Tutorial

This is a tutorial for using VBA with Microsoft Word. This tutorial will teach you how to write a simple Macro and interact with Documents, Ranges, Selections, and Paragraphs.

Note: If you’re brand new to Macros / VBA you might also find this article useful: How to write VBA Macros from Scratch.

VBA is the programming language used to automate Microsoft Office programs including Word, Excel, Outlook, PowerPoint, and Access.

Macros are blocks of VBA code that perform specific tasks.

When you Record a Macro, Word will write VBA code into a Macro, allowing you to repeat your actions. You can see a list of all available Macros from View > Macros.

After recording a Macro, you will be able to edit the Macro from the Macro List:

When you click Edit, you open the VBA Editor. Using the VBA Editor you can edit recorded Macros or write a Word Macro from scratch. To access the VBA Editor use the shortcut ALT + F11 or click Visual Basic from the Developer Ribbon.

Simple Word Macro Example

This is a simple example of a Word VBA Macro. It performs the following tasks:

• Opens a Word Document
• Writes to Document
• Closes and Saves the Word Document.

Sub WordMacroExample()

    'Open Doc & Assign to Variable
    Dim oDoc As Document
    Set oDoc = Documents.Open("c:UserssomeoneNewDocument.docx")
    
    'Write To Doc
    Selection.TypeText "www.automateexcel.com"
    Selection.TypeParagraph
    
    'Save and Close Doc
    oDoc.Save
    oDoc.Close
    
End Sub

Word Macro Basics

All VBA code must be stored within procedures like this. To create a procedure in VBA type “Sub WordMacroExample” (Where “WordMacroExample” is your desired Macro name) and press ENTER. VBA will automatically add the parenthesis and End Sub.

Word Document Object

When interacting with Microsoft Word in VBA, you will frequently reference Word “Objects”. The most common objects are:

Application Object – Microsoft Word itself

Document Object – A Word document

Range Object – A part of a Word document

Selection Object – A selected range or cursor location.

AutoMacro | Ultimate VBA Add-in | Click for Free Trial!

Application

Application is the “top-level” object. All other objects in Word can be reached through it.

In addition to accessing other Word objects, there are “application-level” settings that can be applied:

Application.Options.AllowDragAndDrop = True

This is an example of accessing the “Selection” of “Windows(1)” with in the Application:

Application.Windows(1).Selection.Characters.Count

However, the most common Word objects can be accessed directly, without typing the full hierarchy. So instead, you can (and should) just type:

Selection.Characters.Count

Documents

ActiveDocument

Often, you will have two or more documents opened in Word and you will need specify which specific Word Document to interact with. One way to specify which document is to use ActiveDocument. For example:

ActiveDocument.PrintOut

…would print the ActiveDocument. The ActiveDocument is the document in Word which “has focus”

To switch the ActiveDocument, use the Activate command:

Documents("Example.docx").Activate

ThisDocument

Instead of using ActiveDocument to reference the active document, you can use ThisDocument to reference the document where the macro is stored. ThisDocument will never change.

ThisDocument.PrintOut

Document Variables

However, for more complicated macros, it can be hard to keep track of the Active Document. It can also be frustrating to switch back and forth between documents.

Instead, you can use Document variables.

This macro will assign the ActiveDocument to a variable and then  print the document using the variable:

Sub VarExample()
    Dim oDoc As Document
    Set oDoc = ActiveDocument
    oDoc.PrintOut
End Sub

Document Methods

Open Document

To Open a Word Document:

Documents.Open "c:UsersSomeOneDesktopTest PM.docx"

We recommend always assigning a Document to a variable upon opening it:

Dim oDoc as Document
Set oDoc = Documents.Open("c:UsersSomeOneDesktopTest PM.docx")

Create New Document

To create a new Word Document:

Documents.Add

We can instruct Word to create a new doc based on some template:

Documents.Add Template:="C:Program FilesMicrosoft OfficeTemplatesMyTemplate.dotx"

As always, it is useful and huge problem saver to assign document to variable upon creating or opening:

Dim oDoc as Document
Set oDoc = Documents.Add (Template:="C:Program FilesMicrosoft OfficeTemplatesMyTemplate.dotx")

Save Document

To save a document:

ActiveDocument.Save

or SaveAs:

ActiveDocument.SaveAs FileName:= c:UsersSomeOneDesktoptest2.docx", FileFormat:=wdFormatDocument

Close Document

To close a Document and save changes:

ActiveDocument.Close wdSaveChanges

or without saving changes:

ActiveDocument.Close wdDoNotSaveChanges

Print Document

This will print the active Document:

ActiveDocument.PrintOut

Range, Selection, Paragraphs

Range and Selection are probably the most important objects in Word VBA, certainly the most used.

Range refers to some portion of document, usually, but not necessarily, text.

Selection refers to selected text (or other object like pictures) or, if nothing is selected, an insertion point.

Paragraphs represent paragraphs in document. Its less important than it sounds, because you can’t directly access paragraph text (you need to access particular paragraph range to make modifications).

AutoMacro | Ultimate VBA Add-in | Click for Free Trial!

Range

Range can be any part of document, including entire document:

Dim oRange As Range
Set oRange = ActiveDocument.Content

or it can be small as one character.

Another example, this range would refer to first word in document:

Dim oRange As Range
Set oRange = ActiveDocument.Range.Words(1)

Usually, you would want to get range which refers to specific part of document and then modify it.

In the following example we will make the first word of second paragraph bold:

Dim oRange As Range
Set oRange = ActiveDocument.Paragraphs(2).Range.Words(1)
oRange.Bold = True

Set Range Text

To set the text value of a Range:

Dim oRange As Range
Set oRange = ActiveDocument.Paragraphs(2).Range.Words(1)
oRange.Text = “Hello ”

(Tip: Note the space after “Hello”. Because word object includes space after word, with just “hello” we would get “Hellonext word”)

There are hundreds of things which you can do with ranges. Just a few examples (these assume you are already made object variable oRange referring to range of interest):

Change font

oRange.Font.Name = "Arial"

Display in message box number of characters in particular range

MsgBox oRange.Characters.Count

Insert some text before it

oRange.InsertBefore "this is inserted text "

Add a footnote to range

ActiveDocument.Footnotes.Add Range:=oRange, _
Text:="Read more at automateexcel.com."

Copy it to clipboard

oRange.Copy
Often you need to change to what is particular range referring. So you can start it’s start and end
oRange.Start = 5
oRange.End = 50

After above code, oRange would refer to text starting with fifth and ending with 50th character in document.

Selection

Selection is even more widely used than Range, because it is easier to work with Selections than Ranges, IF your macro ONLY interacts with the ActiveDocument.

First select the desired part of your document.  For example select the second paragraph in active document:

ActiveDocument.Paragraphs(2).Range.Select

Then you can use the Selection Object to type some text:

Selection.TypeText "Some text"

We can type some paragraphs bellow “Some text”:

Selection.TypeText "Some text"
Selection.TypeParagraph

Often, it’s necessary to know if some text is selected or we have just a insertion point:

If Selection.Type <> wdSelectionIP Then
    Selection.Font.Bold = True
Else
    MsgBox "You need to select some text."
End If

When working with Selection object we want to place insertion point to particular place, and issue commands starting from this point.

Beginning of document:

Selection.HomeKey Unit:=wdStory, Extend:=wdMove

Beginning of current line:

Selection.HomeKey Unit:=wdLine, Extend:=wdMove

The Extend parameter wdMove moves the insertion point. Instead, you could use wdExtend which will select all text between the current insertion point.

Selection.HomeKey Unit:=wdLine, Extend:=wdExtend

Move Selection

The most useful method for changing position of insertion point is Move. To move Selection two characters forward:

Selection.Move Unit:=wdCharacter, Count:=2

to move it backwards, use negative number for Count parameter:

Selection.Move Unit:=wdCharacter, Count:=-2

Unit parameter can be wdCharacter, wdWord, wdLine, or more (use Word VBA help to see others).

To move words instead:

Selection.Move unit:=wdWord, Count:=2

Selection is easier to work with (compared to ranges) because it is like a robot using Word, mimicking human user. Where Insertion point is – some action would take place. But, this means that you must take care where insertion point is! This is not easy after many steps in code. Otherwise, Word would change text in not desired place.

In the case you need some property or method not available in Selection object you can always easily obtain range associated with selection:

Set oRange = Selection.Range

TIP: Using Selection is often easier than using ranges, but also it’s way slower (important when you deal with big documents)

Paragraphs

You can’t directly use Paragraphs object to change text:

ActiveDocument.Paragraphs(1).Text = "No, it wouldn't work"

Above wouldn’t work (actually it will throw an error). You need to first obtain range associated with particular paragraph:

ActiveDocument.Paragraphs(1).Range.Text = "It works now :)"

But you can directly change its style:

ActiveDocument.Paragraphs(1).Style = "Normal"

or change its paragraph level formatting:

ActiveDocument.Paragraphs(1).LeftIndent = 10

or maybe you want to keep this paragraph on the same line with next paragraph:

ActiveDocument.Paragraphs(1).KeepWithNext = True

Make paragraph centered:

ActiveDocument.Paragraphs(1).Alignment = wdAlignParagraphCenter

It is VERY useful to assign a particular paragraph to object variable.  If we assign particular paragraph to variable we don’t have to worry if the first paragraph becomes the second because we inserted one paragraph before it:

dim oPara as Paragraph
Set oPara = Selection.Paragraphs(1) ‘here we assign first paragraph of current selection to variable

Here is an example where we insert a paragraph above the first paragraph, but we can still reference the old first paragraph because it was assigned to a variable:

Sub ParagraphExample()
    Dim oPara As Paragraph
    Set oPara = ActiveDocument.Paragraphs(1)
    MsgBox oPara.Range.Text
    oPara.Range.InsertParagraphBefore 'Insert Paragraph
    MsgBox oPara.Range.Text
End Sub

Paragraph object is very frequently used in loops:

Sub LoopThroughParagraphs()

    Dim oPara As Paragraph
    For Each oPara In ActiveDocument.Paragraphs
        'do something with it. We will just display
        'paragraph text if its style is "Heading 4"
        If oPara.Style = "Heading 4" Then
            MsgBox oPara.Range.Text
        End If
    Next oPara

End Sub

Word VBA Tutorial Conclusion

This tutorial covered the basics of Word VBA. If you’re new to VBA, you should also review our general VBA Tutorial to learn more about Variables, Loops, MessageBoxes, Settings, Conditional Logic and much more.

AutoMacro | Ultimate VBA Add-in | Click for Free Trial!

Word Macro Examples

Word VBA FAQs

What is a Word Macro?

A Macro is a general term that refers to a set of programming instructions that automates tasks. Word Macros automate tasks in Word using the VBA programming language.

Does word have VBA?

Yes, Microsoft Word has the VBA Editor. It can be accessed with by pressing ALT + F11 or by navigating to Developer > Visual Basic.

How do I use VBA in Word?

1. Open the VBA Editor (ALT + F11 or Developer > Visual Basic)
2. Go to Insert > Module to create a Code Module
3. Type ‘Sub HelloWorld’ and press Enter
4. In between the lines ‘Sub HelloWorld’ and ‘End Sub’, type ‘MsgBox “Hello World!’
5. You’ve created a Macro!
6. Now press ‘F5’ to run the Macro