Microsoft word changing one word for all

Find and replace text

Your browser does not support video. Install Microsoft Silverlight, Adobe Flash Player, or Internet Explorer 9.

  1. Go to Home > Replace.

  2. Enter the word or phrase you want to replace in Find what.

  3. Enter your new text in Replace with.

  4. Choose Replace All to change all occurrences of the word or phrase. Or, select Find Next until you find the one you want to update, and then choose Replace.

  5. To specify only upper or lowercase in your search, select More > Match case. There are several other ways to search in this menu.

Match case

For other options, see Find and replace text

Find and replace basic text

In the upper-right corner of the document, in the search box Enter text to search for in the document, type the word or phrase that you want to find, and Word will highlight all instances of the word or phrase throughout the document.

To replace found text:

  1. Select the magnifying glass, and then select Replace.

    The Replace option is highlighted in the Search box

  2. In the Replace With box, type the replacement text.

  3. Select Replace All or Replace.

    Tips: 

    • You can also open the basic Find and Replace pane with the keyboard shortcut CONTROL + H.

    • When you replace text, it’s a good idea to select Replace instead of Replace All. That way you can review each item before replacing it.

You can find text with special formatting, such as bold or highlight, by using the Format menu.

  1. Select View > Navigation Pane.

    On the View tab, Navigation Pane is checked

  2. In the Navigation Pane, select the magnifying glass.

  3. Select Settings Screenshot of gear, and then select Advanced Find & Replace.

    In the Find and Replace box, Advanced Find and Replace is highlighted

    Notes: 

    • Select the arrow at the bottom of the Find and Replace dialog box to show all options.

    • Shows how to open the Format popup menu

  4. On the Format menu, select the option that you want.

    Shows the Format options

    If a second dialog box opens, select the options that you want, and then select OK.

  5. In the Find and Replace dialog box, select Find Next or Find All.

You can find and replace text with special formatting, such as bold or highlight, by using the Format menu.

  1. Select View > Navigation Pane.

    On the View tab, Navigation Pane is checked

  2. In the Navigation Pane, select the magnifying glass.

  3. Select Settings Screenshot of gear, and then select Advanced Find & Replace.

    In the Find and Replace box, Advanced Find and Replace is highlighted

  4. At the top of the dialog box, select Replace.

    Notes: 

    • Select the arrow at the bottom of the Find and Replace dialog box to show all options.

    • Shows how to open the Format popup menu

  5. On the Find what box, type the text that you want to find.

  6. On the Format menu, select the formatting that you want to find.

    Shows the Format options

    If a second dialog box opens, select the options that you want, and then select OK.

  7. Select in the box next to Replace with.

  8. On the Format menu, select the replacement formatting. If a second dialog box appears, select the formats that you want, and then select OK.

  9. Select Replace, Replace All, or Find Next.

  1. Select View > Navigation Pane.

  2. In the Navigation Pane, select the magnifying glass.

  3. Select Settings Screenshot of gear, and then select Advanced Find & Replace.

    In the Find and Replace box, Advanced Find and Replace is highlighted

    Notes: 

    • Select the arrow at the bottom of the Find and Replace dialog box to show all options.

    • Shows how to open the Format popup menu

  4. On the Special menu, select the special character that you want to find.

    Find special characters

  5. Select Find Next.

  1. Select View > Navigation Pane.

    On the View tab, Navigation Pane is checked

  2. In the Navigation Pane, select the magnifying glass.

  3. Select Settings Screenshot of gear, and then select Advanced Find & Replace.

    In the Find and Replace box, Advanced Find and Replace is highlighted

    Notes: 

    • Select the arrow at the bottom of the Find and Replace dialog box to show all options.

    • Shows how to open the Format popup menu

  4. At the top of the Find and Replace dialog box, select Replace and then select in the Find What box, but don’t type anything there. Later, when you select a special character, Word will automatically put the character code in the box for you.

    Note: Select the arrow at the bottom of the Find and Replace dialog box to show all options.
    Shows how to open the Format popup menu

  5. On the Special menu, select the special character that you want to find.

  6. Select in the Replace with box.

  7. On the Special menu, select the special character that you want to use as a replacement.

  8. Select Replace or Find Next.

  1. Select View > Navigation Pane.

    On the View tab, Navigation Pane is checked

  2. In the Navigation Pane, select the magnifying glass.

  3. Select Settings Screenshot of gear, and then select Advanced Find & Replace.

    In the Find and Replace box, Advanced Find and Replace is highlighted

  4. Select the Use wildcards check box.

    If you don’t see the Use wildcards check box, select Down arrow for more options.

  5. Select the Special menu, select a wildcard character, and then type any additional text in the Find what box.

    Using wildcards in the Find and Replace dialog box

  6. Select Find Next.

    Tips: 

    • To cancel a search in progress, press The Command button.+ PERIOD.

    • You can also enter a wildcard character directly in the Find what box instead of selecting an item from the Special pop-up menu.

    • To search for a character that’s defined as a wildcard character, type a backslash () before the character. For example, type ? to find a question mark.

    • You can use parentheses to group the wildcard characters and text and to indicate the order of evaluation. For example, search for <(pre)*(ed)> to find «presorted» and «prevented.»

    • You can search for an expression and use the n wildcard character to replace the search string with the rearranged expression. For example, type (Newman) (Belinda) in the Find what box and 2 1 in the Replace with box. Word will find «Newman Belinda» and replace it with «Belinda Newman.»

  7. To replace found text:

    1. Select the Replace tab, and then select the Replace with box.

    2. Select Special, select a wildcard character, and then type any additional text in the Replace with box.

    3. Select Replace All, Replace, or Find Next.

      Tip: When you replace text, it’s a good idea to select Replace instead of Replace All. That way you can confirm each replacement to make sure that it’s correct.

You can refine a search by using any of the following wildcard characters.

To find

Use this

For example

Any single character

?

s?t finds «sat» and «set.»

Any string of characters

*

s*d finds «sad» and «started.»

One of the specified characters

[ ]

w[io]n finds «win» and «won.»

Any single character in this range

[-]

[r-t]ight finds «right» and «sight» and «tight.»

Ranges must be in ascending order.

Any single character except the characters inside the brackets

[!]

m[!a]st finds «mist» and «most» but not «mast.»

Any single character except characters in the range inside the brackets

[!x-z]

t[!a-m]ck finds «tock» and «tuck» but not «tack» or «tick.»

Ranges must be in ascending order.

Exactly n occurrences of a character or expression

{ n}

fe{2}d finds «feed» but not «fed.»

At least n occurrences of a character or expression

{ n,}

fe{1,}d finds «fed» and «feed.»

A range of occurrences of a character or expression

{ n, n}

10{1,3} finds «10,» «100,» and «1000.»

One or more occurrences of a character or expression

@

lo@t finds «lot» and «loot.»

The beginning of a word

<

<(inter) finds «interesting» and «intercept» but not «splintered.»

The end of a word

>

(in)> finds «in» and «within,» but not «interesting.»

Word for the web lets you find and replace basic text. You can match case or fine whole words only. For more varied options, open your document in Word for the desktop.

Need more help?

Many of the applications that you use every day will have a way for you to search through the text that appears on the screen or in the file that is currently open. Often this will be accessible by choosing a “Find” option from a menu or using the Ctrl + F keyboard shortcut.

Sometimes you will make a mistake when you are typing a document, but you won’t realize your mistake until long after it has already happened.

Going back and manually fixing that mistake can be time-consuming if it has happened a lot, and you may inadvertently miss something.

Fortunately, Word 2013 has a function that allows you to automatically replace every occurrence of a word in your document with a different word. So if you incorrectly used a term multiple times throughout a document, it is a simple matter to replace that word with a different one.

  1. Click the Home tab.
  2. Click the Replace button in the Editing section of the ribbon.
  3. Type the word to replace into the Find what field.
  4. Type the replacement word to use into the Replace with field, then click the Replace All button.

Our guide continues below with more information on replacing all occurrences of a word in Microsoft Word, including pictures of these steps.

How to Replace a Word with a Different Word in Word 2013 (Guide with Pictures)

We are going to cover the very basics of this feature first, then we are going to show you how to customize it a little bit to prevent Word from accidentally replacing parts of a Word that match your criteria.

Step 1: Open your document in Word 2013.

Step 2: Click the Home tab at the top of the window.

click the home tab

Step 3: Click the Replace button in the Editing section on the right side of the ribbon.

click the replace button

Step 4: Type the word that you want to replace into the Find what field, then type the word that you want to use to replace it into the Replace with field. Click the Replace All button at the bottom of the window when you are finished.

how to replace word occurrences in word 2013

The problem you may run into with the feature is that it is replacing that text string, not just occurrences of the word. So if you are replacing “xxx” with “yyy”, but you have the word “xxxa” in your document, then it will also be changed to “yyya”. Fortunately, there is a way to prevent this.

How to Use Find and Replace in Word 2013 to Only Replace Whole Words

The steps in this section are going to modify the previous section slightly to prevent Word from replacing text strings that appear within other words.

Step 1: Click the More button at the bottom of the Find and Replace window.

click the mroe button at the bottom of the find and replace window

Step 2: Click the box to the left of Find whole words only.

customize the replace action

You will notice that there are many other options on this menu that you can also use to customize the replace function. For example, using the Match case option would only replace words that were in the same case. This option allows you to replace instances of “John” while ignoring “JOHN”.

This tool becomes even more powerful when you include the Format and Special options at the bottom of the window, which allows you to find and replace information based on the type of formatting that has been applied to it. This is a very powerful, customizable tool that will let you find and replace in almost any way that you might need.

How Can I Get to the Find and Replace Dialog Box in Microsoft Word 2013?

As we have discussed in earlier sections of this document you will find Word’s find and replace feature if you select the Home tab at the top of the window, then click Replace in the Editing group in the window.

But you can also find and replace text by using the Ctrl + H keyboard shortcut to open the Find and Replace box. When you use this shortcut rather than the Ctrl + F option to find a specific word in your document then the window will open with the Replace tab as the active tab.

This can be a little faster as it cuts out the part of the process where you need to choose Replace if you had selected the Advanced Find option from the menu.

More Information on How to Replace All Occurrences of a Word in Word 2013

The steps in the article above provide you with the means to quickly find and replace a word that appears multiple times within your Microsoft Word document. That assumes that the word is spelled the same way each time, otherwise, Word is going to miss those misspellings.

You may wish to use the spell checker before you do this so that Word can catch spelling mistakes so it doesn’t overlook a misspelled version of the word.

All of the advanced find and replace options that appear on the Find and Replace window after you click More are:

  • Match case
  • Find whole words only
  • Use wildcards
  • Sounds like (English)
  • Find all word forms (English)
  • Match prefix
  • Match suffix
  • Ignore punctuation characters
  • Ignore white-space characters

As you can see, this tool has a lot of different variables that you can apply which will enable you to find and replace almost any string of text or word that you might want to change within your document.

MS Word has been updating both the find and replace option for years to the point where it has become an incredibly powerful and useful way to find text or find words and quickly search through your document content. In newer versions of Word when you click the Find button or press Ctrl + F on your keyboard it will open a Navigation pane at the left side of the window. If you just need to find individual instances of a word or phrase ion long documents then this can be a life saver.

You always have the open to press Ctrl + H to open the Find and Replace window in newer versions of Word, however, if you prefer the replace or find box over the new Navigation pane.

Did you know that there is a freehand drawing tool in Word 2013? Find out how to draw in Word 2013 if you need to add a shape to a drawing that you can’t replicate with one of the other options.

Additional Sources

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Read his full bio here.

Microsoft Office, Microsoft Word, Office 2007, Office 2010, Office 2013, Office 2016, Office 2019, Office 365 /

20 February 2023

Word can ‘select all’ text of a chosen style, then you can change all to another style, here’s how,

Gordon G asks “Just read Convert Normal style into Body Text style in Word why didn’t you use Select All from the Styles list then apply a different style?”

In Word there’s sometimes more than one way to reach the same result. In Office for Mere Mortals we usually go for the method that easiest to understand and least likely to cause trouble.

Here’s the Word changing one style to another method that Gordon is talking about.

Let’s say we want to change all the Body Text paragraphs in a document to the ‘Intense Quote’ style.  You could use the Style Replace feature, as we’ve suggested before, or this more direct approach.

Go to the Style Gallery or Style Pane, right click on the style to change and choose ‘Select All’.

As you can see, all the elements with that style are selected.  Once selected you can do anything possible with a selection (e.g copy to another document).  In this case we want to apply another style.

Click on the new style and it’s linked to all the selections.

This works OK for relatively small documents but, in our experience, it’s not reliable for larger documents.  It seems that not everything is selected when you ‘Select All’ and so the change isn’t consistently applied through the document.

Maybe that’s just our luck, a particular build of Word or some Microsoft demon sent to annoy us.  In any event, overall caution is one reason why we chose the Style Replace option rather than Style | Select All.

Use whichever one suits you best.

How to convert Normal style to Body Text style in Word
Why choose Body Text vs Normal style in Word
Microsoft Word turns your recording into text with just one click!

Often when working in Microsoft Word we only need to change one or two words in the file to make it relevant to another client or project. For Example, updating a client’s name in a 30-page contract or updating the address of a company or speakers name in a briefing document.

Because scrolling through your document changing each word individually would be a tedious and time-consuming task Microsoft has built-in a hand tool called ‘Find and Replace’.

Find and Replace allows you to replace one word with another, across the entirety of your Microsoft Word Document at the click of a button.

There is no limit to how many times you can use this tool, but it does need to be done word by word, we can’t yet find and replace multiple words at once. But still, it’s a huge time saver and will guarantee you don’t miss a word that needs replacing.

In this post we will show you how to use the Find and Replace tool in Microsoft Word and leave you updating your document in seconds.

Using Microsoft Word’s Find and Replace

  1. Open Word
  2. Find and click Edit in the Home bar
  1. Under Edit click Find
  1. In the Find tab press Replace….
  1. This will open a navigation box on the left-hand side of your Word Document
  2. Type the word you wish to replace in the Find box
  1. Type the word you wish to replace this word with, in the second text box
  1. Choose Replace. To replace all instances at the same time, select Replace All.
  1. Press OK.

You have no successfully used Words Find and Replace feature to update your Microsoft Word Document.

Advanced Word Replacement

If your word search shows multiple options, as shown below.

You can scroll through the highlighted words until you find the word you would like to replace. This will narrow down the word search and ensure you only replace the exact word you are looking for.

Looking for an easier solution to your collaboration frustrations?

When collaborating in Microsoft Word, your email inbox can quickly become filled with updated versions of a document being sent back and forward between colleagues.

John made an edit, sent an email ‘see updated attached’.

Then Lucy made an edit, sent an email 30minutes later ‘updated version attached’, and it goes on for days.

Sending updated versions via email is one way to know a new version is available and required your attention. But it can also clutter your inbox with internal emails, with a single line or sometimes nobody of text in the email.

Businessman in pile of office papers and documents with help sign ...

The alternative is to send them via a group chat channel such as Slack or Microsoft Teams, but you should make a new channel for the document updates so that you don’t miss one, or lose it in an open channel as other conversations start happening around the document being sent.

With overflowing inboxes and your slack channel constantly telling you there are un-read messages there needs to be a solution for collaborating alone. Somewhere your updated versions can live in peace, with no other noise around them to allow you to easily review and check them at any time.

The solution is here and it comes in the form of a great new purpose-built tool called Simul Docs.

Simul was built just for Microsoft Word and for you, to help you collaborate with ease.

First and foremost, Simul will store and manage every version of your document in an easy to navigate toolbar that you can access from anywhere you have an internet connection (or offline if you do a quick download before losing your connection).

As a new version of your document is created, Simul will automatically save the file under a numerical version number that makes sense. The first version is named 0.0.1, the second 0.0.2, the third 0.0.3 and so on. Making it easy for you to keep track of how many versions have been made and which one is the most recent.

But what about any extra notes or comments the author wanted to make, ones they would usually put in the email such as ‘Tim, this is my final round of edits before we send onto client’? No worries, Simul allows you to add comments and notes to any version as well, so your team can see what is going on at all times.

Speaking of comments and notes, Simul will also track every comment, change or edit made to a version for you, without you having to remember to turn tracked changes on. That’s pretty cool, right?

So a tool that manages your version control, saves your files and stores them and tracks all of your edits and changes without you thinking about any of it, it sounds too good to be true or as though it would be difficult to use or implement. Well, don’t worry it’s not, it’s here and it is called Simul Docs and it’s so easy to use, after walking through the in-app tutorial we had it down within 3 minutes.

It’s a bit like an apple product, it just makes sense. It’s clean and simple, nothing too complicated, but with everything you need all in the one spot.

If you’re not convinced already, head over to Simul now and give their free trial a go.

Collaboration just got a whole lot easier with Simul Docs.

Please Note:
This article is written for users of the following Microsoft Word versions: 2007, 2010, 2013, and 2016. If you are using an earlier version (Word 2003 or earlier), this tip may not work for you. For a version of this tip written specifically for earlier versions of Word, click here: One Change Affects Everything.

Written by Allen Wyatt (last updated November 28, 2022)
This tip applies to Word 2007, 2010, 2013, and 2016


Perhaps you’ve had this happen to you: You are typing along, and you decide you need to make a formatting change in your document. In this particular case, you want to format a particular paragraph as bold face. You select the paragraph, click on the Bold tool on the Home tab of the ribbon, and all the paragraphs in your document change to bold—not just the one you selected.

Or, you decide you want to add a bullet to the start of one paragraph. You select the paragraph, click the Bullets tool, and bullets appear in front of all the paragraphs in the document—not just the one you selected. What is going on, and how can this be corrected?

When this type of change occurs, you can press Ctrl+Z right away (the Undo shortcut) and Word reverses its action. Continually pressing Ctrl+Z is a pain, however. It is much better to understand the cause of the problem, then you can make the changes you need.

Formatting in Word is based on styles. Even if you don’t know what styles are or have made a conscious decision to never use styles, they are still there, working in the background. Every paragraph in your document is based on an underlying style that defines how that paragraph appears on the page. With this tidbit firmly understood, the next time you get a «global change» when you only wanted to affect a single paragraph, follow these four steps to greater enlightenment:

  1. Press Ctrl+Z to undo the global change.
  2. With the insertion point still in the paragraph you formatted (or the paragraph completely selected), display the Home tab of the ribbon and click the small arrow icon at the bottom right of the Styles group. This displays the Styles pane at the right side of your screen.
  3. Hover the mouse pointer over the style that is selected in the pane and click the down-arrow at its right side.
  4. Click on Modify. Word displays the Modify Style dialog box. (See Figure 1.)
  5. Figure 1. The Modify Style dialog box.

Take a good look at the dialog box. At the bottom is a check box labeled Automatically Update. If this check box is selected, it means that whenever you make changes to the paragraph, in your document, those changes are automatically made to the style that is assigned to the paragraph. Once the change is made, then every other paragraph in your document that is formatted using the same style is automatically changed.

If you are a person that ignores styles completely or who thinks you don’t need to worry about them, this is where you can get into trouble. In most cases, Word uses the Normal style as the default style for paragraphs in a document. Fortunately, Word doesn’t provide an Automatically Update check box for the Normal style. But if your document is using some other style for the basis style for all paragraphs and the Automatically Update check box is selected, it is guaranteed that you will experience the problems described at the beginning of this tip.

To solve this problem, follow these steps:

  1. Display the Modify Style dialog box, as described in the previous four steps.
  2. Make sure the Automatically Update check box is cleared. (If you don’t see this check box, it means that you’ve displayed the Modify Style for the Normal style; you don’t need to make any changes to the Normal style.)
  3. Make sure the New Documents Based On This Template radio button is selected.
  4. Click on OK to close the Modify Style dialog box.
  5. Close the Styles pane.

WordTips is your source for cost-effective Microsoft Word training.
(Microsoft Word is the most popular word processing software in the world.)
This tip (11326) applies to Microsoft Word 2007, 2010, 2013, and 2016. You can find a version of this tip for the older menu interface of Word here: One Change Affects Everything.

Author Bio

With more than 50 non-fiction books and numerous magazine articles to his credit, Allen Wyatt is an internationally recognized author. He is president of Sharon Parq Associates, a computer and publishing services company. Learn more about Allen…

MORE FROM ALLEN

Word Won’t Capitalize Some Sentences

By default, Word capitalizes the first letter of sentences as you type. If you notice that Word doesn’t capitalize some …

Discover More

Stopping Date Parsing when Opening a CSV File

Excel tries to make sense out of any data that you import from a non-Excel file. Sometimes this can have unwanted …

Discover More

Printing a List of Building Blocks

Building Blocks are a great way to semi-automate the creation of common documents. At some point you may want to get a …

Discover More

I have a very long file which refers certain persons as Petitioners and certain persons as Respondents. I want to swap these two words so that the Petitioner is changed to Respondent, and vice versa.
Can this be done automatically?

asked Jan 6, 2018 at 7:10

Usman's user avatar

Use a third word that does not occur in your text.
e.g.

  • change (find and replace) all ‘Petitioner’ to ‘PetitionerXX’,
  • then change all ‘Respondent’ to ‘Petitioner’,
  • and finally change all ‘PetitionerXX’ to ‘Respondent’.

answered Jan 6, 2018 at 7:24

muclux's user avatar

mucluxmuclux

7501 gold badge9 silver badges14 bronze badges

4

You’ve just finished typing a presentation that’s due in about 15 minutes. But before you can celebrate your moment of victory, you realize that you’ve spelled your client‘s name wrong and have missed the double Rs in their company name multiple times throughout your document.

Cue: An aggravated scream.

The good news is that changing these small errors is an easy fix on Office 365. You can replace as many words as you want within seconds on Microsoft Word using its super helpful Find and Replace functionality.

This article will guide you through the necessary steps to help you find and replace text in MS Word.

Ready? Let’s begin.

How to Use Microsoft Word’s Find and Replace Feature

Microsoft is one of the leading companies in the world. It’s because it prioritizes its customers and comes up with innovations that can make their lives easier and more convenient.

The Find and Replace feature on MS Word is a shining example of this effort.

You can use this feature to find specific words in your file and then replace them in case there are some last-minute changes. This can even be useful when you make mistakes in the doc while typing or want to accommodate those last-minute client changes.

We’ll show you how to replace text in Microsoft Word, depending on the computer device you use.

How to Change and Replace Text in MS Word on Windows

It’s no wonder that all Windows devices have built-in Microsoft programs considering it’s a product developed by the Microsoft company themselves. If you find yourself using the word processor often for making notes or presentations, you’ll be especially thankful for the Find and Replace functionality.

Here’s a short step-by-step guide to using the feature in MS Word on Windows devices:

Step #1 Open Microsoft Word on your Windows device.

Step #2 Click on the Home tab on your top menu bar. A secondary menu will appear on your screen.

Step #3 Select the Replace option located on the top-right-hand side of your screen. Alternatively, you can also press Ctrl + H. The Find and Replace pop-up box will appear immediately.

Step #4 Type in the phrase or word you want to locate in your Word doc in the Find what field under the Find tab.

Step #5 Click on the Replace tab on the top menu bar. Type in the word you want to update in the Replace with field.

On clicking on the Replace button, the changes you want will be made one by one in the Word doc. However, if you want to update all fitting instances at once, you can click on Replace All instead.

Microsoft Word will give you a confirmation of the replacements made in your Word doc. It’ll look something like this:

How to Change and Replace Text in MS Word on Mac

Now that we’ve covered Windows, let’s see how you can use the Find and Replace feature on a MacBook. Here’s how to proceed in MS Word when you’re using an iOS device:

Step #1 Open the Microsoft Word document on your Mac.

Step #2 Take your cursor towards the top of your screen until you see your Mac’s top toolbar. Click on the Edit tab. A dropdown menu will appear.

Step #3 Click on Find from the displayed menu options. You’ll typically see a Replace… option on your screen.

But if you don’t, simply press Shift + Command + H on your keyboard. A side navigation bar will appear on the left-hand side of your computer screen.

Step #4 Enter the word or phrase you want to replace in the doc in the Search for… field.

Once you’ve finished typing the incorrect word or phrase, type in the right word or phrase that you want to replace the incorrect one with in the Replace with… field.

Step #5 Click on the Find tab to locate the matches. Once you’re sure the match is right and highlighting the words you want to change, select Replace. This will replace every individual match one by one.

Again, if you click on the Replace All button, all the matching words and phrases will be changed at once.

After the changes are made, you’ll see an “All Done” message just below the Replace and Replace All buttons that indicate the replacement of the intended word or phrase.

Advanced Find and Replace Features: Everything You Need to Know

You can take this whole shebang of replacing words and phrases to the next level thanks to Microsoft Word’s Advanced Find and Replace option. In other words, you can use the Advanced settings to simplify the process further and make the results even more accurate.

Follow the previously stated steps to open the Find and Replace pop-up box. On it appears on your screen, click on More.

You’ll immediately see a slew of additional options like Match case, Use wildcards, Match prefix, Match suffix, and so on. Here’s how the Advanced Find and Replace settings look like:

Each one of these has its own unique functions. Let’s discuss them in more detail below:

Find whole words only

If you check on the Find whole words only box, MS Word will treat your search term as an entire word and won’t look for your search term within other words.

Example: If you’re searching for the word “stand,“ the search feature won’t show you the word “standard.”

Use wildcards

Use wildcards is one of the more advanced search options that allows you to use question marks, brackets, asterisks, and other similar symbols to modify your search.

You see, a wildcat is a short string of characters – or a character – that represents multiple characters in a search.

Example: <(int)*(net)>

Sounds like (English)

As the name suggests, the Sounds like option finds similar-sounding words to your search term. This is best for finding homonyms and words that have varying spellings.

Example: This is common for words that have both UK and US variants. For instance, you can have both “colours” and “colors” on a document.

Find all word forms (English)

This option allows you to look for the word you searched for, along with other instances that are either plural or in a different tense.

Example: If you search for the word “be” after enabling the Find all word forms option, you’ll also find the words “are“ and “is“ highlighted as they are the different tense forms of “be.”

Match prefix and Match suffix

Checking off the Match prefix or Match suffix fields will limit your search to words that have the same beginning or the same ending, respectively.

Example: Suppose you enable Match prefix. When you search for the word “love,” Microsoft Word will find the words “love“ and “lovely.“ However, you won’t find the word “beloved“ highlighted in the search results as it’s a suffix of love.

Ignore punctuation characters and Ignore white-space characters

Again, this search option is self-explanatory. It tells Microsoft Word not to take up spaces, periods, hyphens, and similar attitudes into consideration.

Example: After clicking on the search options, when you type in “color block”, you’ll also see “color-block.”

When to Use the Find and Replace Feature of Microsoft Word

The whole point of the Find and Replace function in Microsoft Word is to allow MS Word users to search for target text – whether it’s a specific word, a type of formatting, or a string of wildcard characters – and replace them with whatever you want.

Typically, here’s why you should use this feature:

  • When you want to maintain absolute consistency in your document
  • When you want to speed up typing and formatting tasks
  • When you realize last-minute mistakes and want to find and then replace your errors
  • When you’re writing a document that includes words with varying spellings. For instance, if you typically follow US English, and are typing a doc according to the rules of UK English, the Find and Replace feature would be super helpful to identify and change spelling errors.
  • Adding special characters to words
  • editing partial words and phrases
  • Correcting words that you may have misspelled in a hurry. For instance, if you type “h?t” instead of “hat” and enable Use wildcards, you’ll find it highlighted in your search.
  • Eliminating extra spaces
  • Changing the separator character in numerals
  • Reversing currency symbols

Concluding Thoughts

As you may have realized, the Find and Replace feature of Microsoft is a lifesaver, to say the least.

It can help you save tons of time, which would otherwise have been wasted in looking for errors and then replacing them. Whether you are a student, an intern, or the CEO of a company, this is a functionality that we all can be very thankful for.

If I made the same mistake several times in the same code. Is it possible for me to change all the mistakes at once rather than finding each mistake and correcting it.

For Ex:- If I have written prnt instead of print several times at different places can I change it at once and apply it for all others rather than going at each place and correcting it manually.

asked Jan 11, 2015 at 4:23

Varun Moghe's user avatar

2

You can use the Find and Replace feature in Visual Studio to find prnt and replace it with print. Use Ctrl+Shift+H as a quick shortcut to find and replace.

answered Jan 11, 2015 at 4:25

ahmed.eltawil's user avatar

You can also change it in for the whole solution.
Use Ctrl+Shift+H on visual studio set the word you want to replace, type in the new word to be replaced, set whether it should be replaced for the entire solution or for that document alone. click replace.

Cool right?

Developer Guy's user avatar

answered May 2, 2018 at 10:49

Global Developer's user avatar

Ctrl+alt+H works as it will allow you to change the same word in a file. You should make it a standard practice as it makes you to code quickly.

answered Mar 17 at 0:01

Gautam Bedi's user avatar

Понравилась статья? Поделить с друзьями:
  • Microsoft word can change font
  • Microsoft word but free
  • Microsoft word bu nima
  • Microsoft word books pdf
  • Microsoft word book pdf