How to merge cells with excel

Merge and unmerge cells

You can’t split an individual cell, but you can make it appear as if a cell has been split by merging the cells above it.

Merge cells

1. Select the cells to merge.

2. Select Merge & Center.

   Important: When you merge multiple cells, the contents of only one cell (the upper-left cell for left-to-right languages, or the upper-right cell for right-to-left languages) appear in the merged cell. The contents of the other cells that you merge are deleted.

Unmerge cells

1. Select the Merge & Center down arrow.

2. Select Unmerge Cells.

Important: 

• You cannot split an unmerged cell. If you are looking for information about how to split the contents of an unmerged cell across multiple cells, see Distribute the contents of a cell into adjacent columns.

• After merging cells, you can split a merged cell into separate cells again. If you don’t remember where you have merged cells, you can use the Find command to quickly locate merged cells.

Merging combines two or more cells to create a new, larger cell. This is a great way to create a label that spans several columns.

In the example here, cells A1, B1, and C1 were merged to create the label “Monthly Sales” to describe the information in rows 2 through 7.

Merge cells

Merge two or more cells by following these steps:

1. Select two or more adjacent cells you want to merge.

   Important: Ensure that the data you want to retain is in the upper-left cell, and keep in mind that all data in the other merged cells will be deleted. To retain any data from those other cells, simply copy it to another place in the worksheet—before you merge.

2. On the Home tab, select Merge & Center.
   

Tips: 

• If Merge & Center is disabled, ensure that you’re not editing a cell—and the cells you want to merge aren’t formatted as an Excel table. Cells formatted as a table typically display alternating shaded rows, and perhaps filter arrows on the column headings.

• To merge cells without centering, click the arrow next to Merge and Center, and then click Merge Across or Merge Cells.

Unmerge cells

If you need to reverse a cell merge, click onto the merged cell and then choose Unmerge Cells item in the Merge & Center menu (see the figure above).

Split text from one cell into multiple cells

You can take the text in one or more cells, and distribute it to multiple cells. This is the opposite of concatenation, in which you combine text from two or more cells into one cell.

For example, you can split a column containing full names into separate First Name and Last Name columns:

Follow the steps below to split text into multiple columns:

1. Select the cell or column that contains the text you want to split.

2. Note: Select as many rows as you want, but no more than one column. Also, ensure that are sufficient empty columns to the right—so that none of your data is deleted. Simply add empty columns, if necessary.

3. Click Data >Text to Columns, which displays the Convert Text to Columns Wizard.

4. Click Delimited > Next.

5. Check the Space box, and clear the rest of the boxes. Or, check both the Comma and Space boxes if that is how your text is split (such as «Reyes, Javiers», with a comma and space between the names). A preview of the data appears in the panel at the bottom of the popup window.

   

6. Click Next and then choose the format for your new columns. If you don’t want the default format, choose a format such as Text, then click the second column of data in the Data preview window, and click the same format again. Repeat this for all of the columns in the preview window.
   

7. Click the button to the right of the Destination box to collapse the popup window.

8. Anywhere in your workbook, select the cells that you want to contain the split data. For example, if you are dividing a full name into a first name column and a last name column, select the appropriate number of cells in two adjacent columns.

   

9. Click the button to expand the popup window again, and then click the Finish button.

   

Merging combines two or more cells to create a new, larger cell. This is a great way to create a label that spans several columns. For example, here cells A1, B1, and C1 were merged to create the label “Monthly Sales” to describe the information in rows 2 through 7.

Merge cells

1. Click the first cell and press Shift while you click the last cell in the range you want to merge.

   Important: Make sure only one of the cells in the range has data.

2. Click Home > Merge & Center.

   

   If Merge & Center is dimmed, make sure you’re not editing a cell or the cells you want to merge aren’t inside a table.

   Tip: To merge cells without centering the data, click the merged cell and then click the left, center or right alignment options next to Merge & Center.

   If you change your mind, you can always undo the merge by clicking the merged cell and clicking Merge & Center.

Unmerge cells

To unmerge cells immediately after merging them, press Ctrl + Z. Otherwise do this:

• Click the merged cell and click Home > Merge & Center.

  

  The data in the merged cell moves to the left cell when the cells split.

  

Need more help?

You can always ask an expert in the Excel Tech Community or get support in the Answers community.

See Also

Overview of formulas in Excel

How to avoid broken formulas

Find and correct errors in formulas

Excel keyboard shortcuts and function keys

Excel functions (alphabetical)

Excel functions (by category)

Merged cells are one of the most popular options used by beginner spreadsheet users.

But they have a lot of drawbacks that make them a not so great option.

In this post, I’ll show you everything you need to know about merged cells including 8 ways to merge cells.

I’ll also tell you why you shouldn’t use them and a better alternative that will produce the same visual result.

What is a Merged Cell

A merged cell in Excel combines two or more cells into one large cell. You can only merge contiguous cells that form a rectangular shape.

The above example shows a single merged cell resulting from merging 6 cells in the range B2:C4.

Why You Might Merge a Cell

Merging cells is a common technique used when a title or label is needed for a group of cells, rows or columns.

When you merge cells, only the value or formula in the top left cell of the range is preserved and displayed in the resulting merged cell. Any other values or formulas are discarded.

The above example shows two merged cells in B2:C2 and D2:F2 which indicates the category of information in the columns below. For example the First and Last name columns are organized with a Name merged cell.

Why is the Merge Command Disabled?

On occasion, you might find the Merge & Center command in Excel is greyed out and not available to use.

There are two reasons why the Merge & Center command can become unavailable.

• You are trying to merge cells inside an Excel table.
• You are trying to merge cells in a protected sheet.

Cells inside an Excel table can not be merged and there is no solution to enable this.

If most of the other commands in the ribbon are greyed out too, then it’s likely the sheet is protected. In order to access the Merge option, you will need to unprotect the worksheet.

This can be done by going to the Review tab and clicking the Unprotect Sheet command.

If the sheet has been protected with a password, then you will need to enter it in order to unprotect the sheet.

Now you should be able to merge cells inside the sheet.

Merged Cells Only Retain the Top Left Values

Warning before you start merging cells!

If the cells contain data or formulas, then you will lose anything not in the upper left cell.

A warning dialog box will appear telling you Merging cells only keeps the upper-left value and discards other values.

The above example shows the result of merging cells B2:C4 which contains text data. Only the data from cell B2 remains in the resulting merged cells.

If no data is present in the selected cells, then no warning will appear when trying to merge cells.

8 Ways to Merge a Cell

Merging cells is an easy task to perform and there are a variety of places this command can be found.

Merge Cells with the Merge & Center Command in the Home Tab

The easiest way to merge cells is using the command found in the Home tab.

1. Select the cells you want to merge together.
2. Go to the Home tab.
3. Click on the Merge & Center command found in the Alignment section.

Merge Cells with the Alt Hotkey Shortcut

There is an easy way to access the Home tab Merge and Center command using the Alt key.

Press Alt H M C in sequence on your keyboard to use the Merge & Center command.

Merge Cells with the Format Cells Dialog Box

Merging cells is also available from the Format Cells dialog box. This is the menu which contains all formatting options including merging cells.

You can open the Format Cells dialog box a few different ways.

• Go to the Home tab and click on the small launch icon in the lower right corner of the Alignment section.
• Use the Ctrl + 1 keyboard shortcut.
• Right click on the selected cells and choose Format Cells.

Go to the Alignment tab in the Format Cells menu then check the Merge cells option and press the OK button.

Merge Cells with the Quick Access Toolbar

If you use the Merge & Center command a lot, then it might make sense to add it to the Quick Access Toolbar so it’s always readily available to use.

Go to the Home tab and right click on the Merge & Center command then choose Add to Quick Access Toolbar from the options.

This will add the command to your QAT which is always available to use.

A nice bonus that comes with the quick access command is it gets its own hotkey shortcut based on its position in the QAT. When you press the Alt key, Excel will show you what key to press next in order to access the command.

In the above example, the Merge and Center command is the third command in the QAT so the hotkey shortcut is Alt 3.

Merge Cells with Copy and Paste

If you have a merged cell in your sheet already then you can copy and paste it to create more merged cells. This will produce merged cells with the exact same dimensions.

Copy a merged cell using Ctrl + C then paste it into a new location using Ctrl + V. Just make sure the paste area doesn’t overlap an existing merged cell.

Merge Cells with VBA

Sub MergeCells()
    Range("B2:C4").Merge
End Sub

The basic command for merging cells in VBA is quite simple. The above code will merge cells B2:C4.

Merge Cells with Office Scripts

function main(workbook: ExcelScript.Workbook) {
	let selectedSheet = workbook.getActiveWorksheet();
	selectedSheet.getRange("B2:C4").merge(false);
	selectedSheet.getRange("B2:C4").getFormat().setHorizontalAlignment(ExcelScript.HorizontalAlignment.center);
}

The above office script will merge and center the range B2:C4.

Merge Cells inside a PivotTable

We can’t make this change for the selected cells because it will affect a PivotTable. Use the field list to change the report. If you are trying to insert or delete cells, move the PivotTable and try again.

If you try to use the Merge and Center command inside a Pivot Table, you will be greeted with the above error message.

You can’t use the Merge & Center command inside a PivotTable, but there is a way to merge cells in the PivotTable options menu.

In order to avail of this option, you will first need to make sure your Pivot Table is in the tabular display mode.

1. Select a cell inside your PivotTable.
2. Go to the Design tab.
3. Click on Report Layout.
4. Choose Show in Tabular Form.

Your pivot table will now be in the tabular form where each field you add to the Rows area will be in its own column with data in a displayed in a single row.

Now you can enable the option to show merge cells inside the pivot table.

1. Select a cell inside your PivotTable.
2. Go to the PivotTable Analyze tab.
3. Click on Options.

This will open up the PivotTable Options menu.

Enable the Merge and center cells with labels setting in the PivotTable Options menu.

1. Click on the Layout & Format tab.
2. Check the Merge and center cells with labels option.
3. Press the OK button.

Now as you expand and collapse fields in your pivot table, fields will merge when they have a common label.

10 Ways to Unmerge a Cell

Unmerging a cell is also quick and easy. Most methods involve the same steps as used to merge the cell, but there are a few extra methods worth knowing.

Unmerge Cells with the Home Tab Command

This is the same process as merging cells from the Home tab command.

1. Select the merged cells to unmerge.
2. Go to the Home tab.
3. Click on the Merge & Center command.

Unmerge Cells with the Format Cells Menu

You can unmerge cells from the Format Cells dialog box as well.

Press Ctrl + 1 to open the Format Cells menu then go to the Alignment tab then uncheck the Merge cells option and press the OK button.

Unmerge Cells with the Alt Hot Key Shortcut

You can use the same Alt hot key combination to unmerge a merged cell. Select the merged cell you want to unmerge then press Alt H M C in sequence to unmerge the cells.

Unmerge Cells with Copy and Paste

You can copy the format from a regular single cell to unmerge merged cells.

Find a single cell and use Ctrl + C to copy it, then select the merged cells and press Ctrl + V to paste the cell.

You can use the Paste Special options to avoid overwriting any data when pasting. Press Ctrl + Alt + V then select the Formats option.

Unmerge Cells with the Quick Access Toolbar

This is a great option if you have already added the Merge & Center command to the quick access toolbar previously.

All you need to do is select the merged cells and click on the command or use the Alt hot key shortcut.

Unmerge Cells with the Clear Formats Command

Merged cells are a type of format, so it’s possible to unmerge cells by clearing the format from the cell.

1. Select the merged cell to unmerge.
2. Go to the Home tab.
3. Click on the right part of the Clear button found in the Editing section.
4. Select Clear Formats from the options.

Unmerge Cells with VBA

Sub UnMergeCells()
    Range("B2:C4").UnMerge
End Sub

Above is the basic command for unmerging cells in VBA. This will unmerge cells B2:C4.

Unmerge Cells with Office Scripts

Most methods of merging a cell can be performed again to unmerge cells like a toggle switch to merge or unmerge.

However the code in office scripts doesn’t work like this and instead, you will need to remove formatting to unmerge.

function main(workbook: ExcelScript.Workbook) {
	let selectedSheet = workbook.getActiveWorksheet();
	selectedSheet.getRange("B2:C4").clear(ExcelScript.ClearApplyTo.formats);
}

The above code will clear the format in cells B2:C4 and unmerge any merged cells it contains.

Unmerge Cells with the Accessibility Pane

Merged cells create problems for screen readers which is an accessibility issue. Because of this, they are flagged in the Accessibility window pane.

If you know the location of the merged cells, you can select them and go to the Review tab then click on the lower part of the Check Accessibility button and choose Unmerge Cells.

If you don’t know where all the merged cells are, you can open up the accessibility pane and it will show you where there are and you will be able to unmerge them one by one.

Go to the Review tab and click on the top part of the Check Accessibility command to launch the accessibility window pane.

This will show a Merged Cells section which you can expand to see all merged cells in the workbook. Click on the address and Excel will take you to that location.

Click on the downward chevron icon to the right of the address and the Unmerge option can be selected.

Unmerge Cells inside a PivotTable

To unmerge cells inside a pivot table, you just need to disable the setting in the pivot table options menu.

Now you can enable the option to show merge cells inside the pivot table.

1. Select a cell inside your PivotTable.
2. Go to the PivotTable Analyze tab.
3. Click on Options.
4. Click on the Layout & Format tab.
5. Uncheck the Merge and center cells with labels option.
6. Press the OK button.

Merge Multiple Ranges in One Step

In Excel, you can select multiple non-continuous ranges in a sheet by holding the Ctrl key. A nice consequence of this is you can convert these multiple ranges into merged cells in one step.

Hold the Ctrl key while selecting multiple ranges with the mouse. When you’re finished selecting the ranges you can release the Ctrl key and then go to the Home tab and click on the Merge & Center command.

Each range will become its own merged cell.

Combine Data Before Merging Cells

Before you merge any cells which contain data, it’s advised to combine the data since only the data in the top left cell is preserved when merging cells.

There are a variety of ways to do this, but using the TEXTJOIN function is among the easiest and most flexible as it will allow you to separate each cell’s data using a delimiter if needed.

= TEXTJOIN ( ", ", TRUE, B2:C4 )

The above formula will join all the text in range B2:C4 going from left to right and then top to bottom. Text in each cell is separated with a comma and space.

Once you have the formula result, you can copy and paste it as a value so that the data is retained when you merge the cells.

How to Get Data from Merged Cells in Excel

A common misconception is that each cell of in the merged range contains the data entered inside.

In fact, only the top left cell will contain any data.

In the above example, the formula references the top left value in the merged range. The result returned is what is seen in the merged range.

In this example, the formula references a cell that is not the top left most cell in the merged range. The result is 0 because this cell is empty and contains no value.

In order to extract data from a merged range, you will always need to reference the top left most cell of the range. Fortunately, Excel automatically does this for you when you select the merged cell in a formula.

How to Find Merged Cells in a Workbook

If you create a bunch of merged cells, you might need to find them all later. Thankfully it’s not a painful process.

This can be done using the Find & Select command.

Go to the Home tab and click on the Find & Select button found in the Editing section, then choose the Find option. This will open the Find and Replace menu

You can also use the Ctrl + F keyboard shortcut.

You don’t need to enter any text to find, you can use this menu to find cells formatted as merged cells.

1. Click on the Format button to open the Find Format menu.
2. Go to the Alignment tab.
3. Check the Merge cells option.
4. Press the OK button in the Find Format menu.
5. Press the Find All or Find Next button in the Find and Replace menu.

Unmerge All Merged Cells

Fortunately, unmerging all merged cells in a sheet is very easy.

1. Select the entire sheet. You can do this two ways.
   • Click on the select all button where the column headings meet the row headings.
   • Press Ctrl + A on your keyboard.
2. Go to the Home tab.
3. Press the Merge & Center command.

This will unmerge all the merged cells and leave all the other cells unaffected.

Why You Shouldn’t Merge Cells

There are a lot of reasons why you shouldn’t merge cells.

• You can’t sort data with merged cells.
• You can’t filter data with merged cells.
• You can’t copy and paste values into merged cells.
• It will create accessibility problems for screen readers by changing the order in which text should be read.

This isn’t an exhaustive list, there are likely many more you will come across should you choose to merge cells.

Alternative to Merging a Cell

Good news!

There is a much better alternative than merging cells.

This alternative has none of the negative features that come with merging cells but will still allow you to achieve the same visual look of a merged cell.

It will allow you to display text centered across a range of cells without merging the cells.

Unfortunately, this technique will only work horizontally with one row of cells. There is no option to do something similar with a vertical range of cells.

Select the horizontal range of cells that you would like to center your text across. The first cell should contain the text which is to be centered while the remaining cells should be empty.

This example shows text in cell B2 and the range B2:C2 is selected as the range to center across.

Go to the Home tab and click on the small launch icon in the lower right corner of the Alignment section. This will open up the Format Cells dialog box with the Alignment tab active.

You can also press Ctrl + 1 to open the Format Cells dialog box and navigate to the Alignment tab.

Select Center Across Selection from the Horizontal dropdown options in the Text alignment section.

The text will now appear as though it occupies all cells but it will only exist in the first cell of the centering selection and each cell is still separate.

Pros

• The text appears centered across the selected range similar to a merged cell.
• No negative effects from merged cells.
• Can be used inside an Excel table.

Cons

• Can not center across a vertical range of cells.

Conclusions

There are lots of ways to merge cells in Excel. You can also easily unmerge cells too if you need to.

There are many things to consider when merging cells in Excel.

As you have seen, there are lots of pitfalls to merged cells that you should consider before implementing them in your workbooks.

Do you have a favorite merge method or warning about the dangers of merged cells that are not listed in the post? Let me know about it in the comments.

There are various ways you can merge cells in Excel.

One of the most used ways is using the Merge & Center option in the Home tab.

The issue with using Merge & Center is that it can merge the cells, but not the text within these cells (i.e., you lose some data when you merge the cells).

Let’s say we have a data set as shown below:

If I select cell A1 and B1 and use the Merge & Center option, it will keep the text from the left-most cell (A1 in this case) and but you will lose the data from all other cells.

Excel is not completely ruthless though – it warns you before this happens.

If you try and merge cells which have text in it, it shows a warning pop-up letting you know of this (as shown below).

If you go ahead and press OK, it will merge the two cells and keep the text from the leftmost cell only. In the above example, it will merge A1 and B1 and will show the text John only.

Merge Cells in Excel Without Losing the Data

If you don’t want to lose the text in from cells getting merged, use the CONCATENATE formula. For example, in the above case, enter the following formula in cell C1: =CONCATENATE(A1,” “,B1)

Here we are combining the cells A1 and B1 and have a space character as the separator. If you don’t want any separator, you can simply leave it out and use the formula =CONCATENATE(A1,B1).

Alternatively, you can use any other separator such as comma or semi-colon.

This result of the CONCATENATE function is in a different cell (in C1). So you may want to copy it (as values) in the cell which you wanted to merge.

You can also use the ampersand sign to combine text. For example, you can also use =A1&” “&B1

The Benefit of Not Merging Cells in Excel

When you use Merge & Center option to merge cells, it robs you of the ability to sort that data set. If you try and sort a data set that has any merged cells, it will show you a pop-up as shown below:

Alternative to Using Merge & Center

If you want to merge cells in different columns in a single row, here is an alternative of Merge & Center – the Center Across Selection option.

Here is how to use it:

• Select the cells that you want to merge.
• Press Control + 1 to open the format cells dialogue box.
• In the Alignment tab, in the Horizontal drop-down, select Center Across Selection.

• Click OK.

This would merge the cells in a way that whatever you enter in the leftmost cell gets centered, however, you can still select each cell individually. This also does not show an error when you try and sort the data.

NOTE: For Center to Across to work, make sure only the leftmost cell has data.

You May Also Like the Following Excel Tutorials:

• How to Unmerge Cells in Excel (3 Easy Ways + Shortcut)
• CONCATENATE Excel Range (with and without separator).
• How to Find Merged Cells in Excel.
• How to Combine Cells in Excel.
• How to Combine Multiple Workbooks into One Excel Workbook.

Merge and Unmerge Cells in Excel

by Avantix Learning Team | Updated February 19, 2022

Applies to: Microsoft^® Excel^® 2013, 2016, 2019, 2021 and 365 (Windows)

In Excel, you can merge cells using the Ribbon or the Format Cells dialog box. You can also access merge commands by right-clicking or using keyboard shortcuts. Typically, when a user wants to merge cells, they are trying to place longer headers in one cell (such as January Actual Sales). You can merge cells horizontally across columns or vertically across rows.

If you want to combine data from cells in a worksheet (such as first name and last name) in another cell, you can use the CONCATENATE function, the CONCAT function, the CONCATENATE operator, the TEXTJOIN function or Flash Fill.

Recommended article: How to Combine Cells in Excel using Concatenate (3 Ways)

Do you want to learn more about Excel? Check out our virtual classroom or in-person Excel courses >

Merge cells options are available in the Alignment group on the Home tab in the Ribbon:

Merge cells removes data

If you merge cells with text, only the text in the upper leftmost cell will be used and text in cells to the right (and below) will be removed. If there is data to the right or below in the cells that you are merging, a dialog box appears warning that Excel will keep the upper left values and remove other data.

Merge cells issues

Merged cells cause problems in lists or data sets as Excel will have difficulty associating data with merged headers or merged cells in the data with the correct headers. If you have longer headers in lists or data sets, it’s best to create shorter headers in single cells above the associated data. You will not be able to sort or filter a range with merged cells.

It’s usually better to use Center Across Selection rather than Merge Cells because Excel will not merge the selected cells into one cell, it will simply center the data. This command is available through the Format Cells dialog box. If you are want to merge a title across the top of a worksheet, this is usually the best choice.

Excel merge cells options

Excel merge options include:

• Merge & Center – this will merge the selected cells into one cell and center the data from the upper leftmost cell across the selected cells (if cells to the right or below the upper leftmost cell in the selection contain data, it will be removed).
• Merge Across – this will merge the selected cells into one cell  from the leftmost cell across the selected cells (if cells to the right of the leftmost cell in the selection contain data, it will be removed). It does not automatically center the data. Merge Across only works for selections across columns, not rows.
• Merge Cells – this will merge the selected cells into one cell  from the upper leftmost cell across the selected cells (if cells to the right or below the upper leftmost cell in the selection contain data, it will be removed). It does not automatically center the data.
• Unmerge Cells – this will unmerge a cell that has been merged.
• Center Across Selection (in the Format Cells dialog box) – this will center the data in the selected cells but will not merge the cells into one cell.

In the following example, cells A1 to D1 have been merged using Merge & Center:

Merge cells using the Ribbon

To merge cells using the Ribbon in Excel:

1. Select the cells you want to merge by dragging over the cells or click in the first cell and Shift-click in the last cell. The cells must be adjacent to each other.
2. Click the Home tab in the Ribbon.
3. In the Alignment group, click the arrow beside Merge & Center. A drop-down menu appears.
4. Select the merge option you want. The data in the top leftmost cell or uppermost cell will be merged across the selected cells. Data in the other cells will be removed.

Options to merge cells and unmerge cells appear in the Ribbon when you click the arrow beside Merge & Center:

Merge cells using keyboard shortcuts

If you want to access commands on the Ribbon in Excel using your keyboard, you can press Alt to display key tips and then press the displayed key(s).

To merge cells using keyboard shortcuts (key tips):

1. Select the cells you want to merge by dragging over the cells or click in the first cell and Shift-click in the last cell. The cells must be adjacent to each other.
2. Press Alt > H > M (this is a sequential shortcut so press Alt then H then M). A drop-down menu with merge options appears in the Ribbon.
3. Press the displayed letter for the command you want. The data in the top leftmost cell or uppermost cell will be merged across the selected cells. Data in the other cells will be removed.

The following are the keyboard or key tips shortcuts for merging and unmerging cells:

• Merge & Center – press Alt > H > M > C.
• Merge Across – press Alt + H + M + A.
• Merge Cells – press Alt > H > M > M.
• Unmerge Cells – press Alt > H > M > U.

Key tips appear in the Ribbon when you press Alt > H > M as follows to display merge options:

Unmerge cells

You can unmerge a cell that has been merged.

To unmerge a cell using the Ribbon:

1. Select the merged cell.
2. Click the Home tab in the Ribbon.
3. In the Alignment group, click the arrow beside Merge & Center. A drop-down menu appears.
4. Select Unmerge Cells.

You can also use the key tips shortcut method to unmerge a cell.

Use Center Across Selection as an alternative to merge cells

You can also use the Format Cells dialog box in Excel to access the Center Across Selection option. In this case, you are actually applying formatting and the cells are not merged. You can display the Format Cells dialog box easily by right-clicking or by pressing Ctrl + 1 (at the top of the keyboard).

To apply Center Across Selection using the Format Cells dialog box:

1. Select the cells with the data you want to center (in the leftmost cell).
2. Press Ctrl + 1 or right-click the selected cells and select Format Cells. A dialog box appears.
3. Click the Alignment tab.
4. From the Horizontal drop-down menu, choose Center Across Selection.
5. Click OK.

Center Across Selection appears in the Format Cells dialog box:

Center across selection is really the best option for merged titles.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Remove Duplicates in Excel (3 Easy Ways)

How to Lock Cells in Excel (Protect Formulas and Data)

3 Excel Strikethrough Shortcuts to Cross Out Text or Values in Cells

Use Conditional Formatting in Excel to Highlight Dates Before Today (3 Ways)

How to Replace Blank Cells in Excel with Zeros (0), Dashes (-) or Other Values

Related courses

Microsoft Excel: Intermediate / Advanced

Microsoft Excel: Data Analysis with Functions, Dashboards and What-If Analysis Tools

Microsoft Excel: Introduction to Power Query to Get and Transform Data

Microsoft Excel: New and Essential Features and Functions in Excel 365

Microsoft Excel: Introduction to Visual Basic for Applications (VBA)

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at info@avantixlearning.ca if you’d like to arrange custom instructor-led virtual classroom or onsite training on a date that’s convenient for you.

Copyright 2023 Avantix^® Learning

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at info@avantixlearning.ca

Knowing the ins and outs of Excel is essential for organizing data, understanding analytics, and getting the most from your marketing efforts. The tool is great for quickly processing vast amounts of data, but it can be overwhelming if you don’t spend the majority of your workday whipping up spreadsheets.

Fortunately, a few basic skills are all you need to put together an easy-to-read spreadsheet. One is knowing how to merge cells in Excel. Whether you’re planning blog articles for the upcoming quarter, creating an email list for a targeted campaign, or designing SEO-friendly Google ads, merging cells is a handy way to organize your information.

To sharpen your skills, we’ll cover several ways to combine cells.

• How to merge two cells
• How to merge and center cells
• How to merge multiple cells
• How to merge cells without losing data
• A shortcut to merge cells
• Why can’t I merge cells?

Don’t want to start from scratch? Use these free Excel templates as a foundation for your own marketing spreadsheets.

Merging is a way to turn two small cells into one new, large cell. This is useful for organizing information and creating headers, without the need to resize individual cells. Here’s how to do it.

Step 1: Highlight the two adjacent cells you want to merge (I’m merging A1 and B1 in the example).

Source

Step 2: Under the Home tab, click the ‘Merge’ icon and choose ‘Merge Cells’.

Source

Step 3: That’s it! You’ve merged the cells.

Source

Note: When combining cells, only the data in the upper left cell is saved. Make sure to save the information from the other cell so it’s not lost. If you happen to have data in both A1 and B1, Excel won’t simply wipe it. This alert will pop up:

Source

Don’t want to delete the data? Click ‘Cancel,’ and copy/paste the information into a separate document or cell before merging. If you only need the information in the upper-left cell, click ‘OK’ to merge the cells.

How to Merge and Center Cells in Excel

Say you’re building a marketing report and want your titles to be centered above your data. Merge and center cells by following these steps.

Step 1: Highlight the cells you want to merge.

Source

Step 2: Under the Home tab, click the ‘Merge’ icon and choose ‘Merge & Center.’

Source

Step 3: Your cells will merge and the data will be centered within the cell.

Source

How to Merge Cells in Excel Shortcut

Clicking the correct ‘Merge’ function over and over can be a drag if you need to combine a lot of cells. For fast merging, start by highlighting the cells you want to merge. Then, type the following key combinations.

Excel Shortcuts for Windows

1. Merge Cells: ALT H+M+M
2. Merge & Center: ALT H+M+C
3. Merge Across: ALT H+M+A
4. Unmerge Cells: ALT H+M+U

Excel Shortcuts for OS

The Apple operating system doesn’t have an ALT key, so you have to set up your own shortcut to merge cells.

1. In Excel, click ‘Tools’ under the navigation bar.
2. Select ‘Customize Keyboard.’
3. A pop-up will appear. Under the header ‘Specify a Command’ there are two columns: Categories and Commands. For Categories, select ‘Home Tab.’ For Commands, select ‘Merge Cells.’
4. Select the text box under ‘Press new keyboard shortcut.’ Type the key combination for your shortcut. For example: CONTROL+M.
5. Click ‘OK’ to set your shortcut.
6. You can now use CONTROL+M to merge cells in Excel.
7. Set up additional shortcuts for Merge Across, Merge & Center, or Unmerge.

Source

How to Merge Multiple Cells in Excel

You know the basics, but now you want to get creative and merge more than two cells. Depending on your desired spreadsheet layout, you can use the Merge Across, Merge Cells, or Merge & Center function.

1. Merge Across

This option is used to merge cells within a single row. You can’t use ‘Merge Across’ to combine cells within a column or across multiple rows.

In this example, I’m setting up PPC ads and want to see my description copy in row 17. If I simply resize column F, my table will have too much space between column F and G. Merging multiple cells across row 17 lets me see the copy and keep the table neat.

Step 1: Highlight all the cells you want to merge within the row.

Source

Step 2: Under the Home tab, click the ‘Merge’ icon and choose ‘Merge Across.’

Source

Step 3: The cells merge across the entire highlighted area.

Source

2. Merge & Center

You can merge and center multiple cells across rows and down columns. Just remember the data in the upper-left cell is the only information that will stay once merged. In the example below, I use ‘Merge & Center’ to combine rows 15, 16, and 17 with columns F, G, and H.

Source

Source

3. Merge Cells

The ‘Merge Cells’ function is ideal to combine multiple adjacent cells across rows and columns. It works just like the ‘Merge & Center’ function, except the data will be left-aligned instead of centered after merging.

Source

How to Merge Cells in Excel Without Losing Data

Want to merge cells without losing information from all but the upper left cell? Easy. You can use the ampersand (&) or the CONCATENATE function to combine data from two or more cells.

In the example below, I’m creating copy for Instagram and want to combine the caption with its corresponding link.

Ampersand

Step 1: Choose the cell where you want to put the merged data. Make sure this is separate from the cells you’re merging.

Step 2: Type = in the blank cell and select the first cell to combine.

Step 3: Type & and use » » to leave a space between cell data.

Step 4: Type & again before choosing the next cell. Repeat for all the cells you want to combine. An example formula is =D5&» «&E5.

Step 5: Hit Enter. In the example, you can see how the text from cells D5 and E5 merged into F5.

Source

CONCATENATE or CONCAT

The CONCATENATE function (or CONCAT) is another way to combine two or more text strings together.

The formula in Excel is =CONCATENATE (text1,text2,…). Text1 is the first cell to merge and can be a text value, number, or cell reference. Text2 is the next item to join. For this function, you can merge up to 255 items or 8,192 characters.

Step 1: Highlight a new blank cell where you want to merge the data.

Step 2: In the formula bar, type =CONCATENATE(

Source

Step 3: A formula builder will pop up, allowing you to choose Text1, Text2, and so on. Select the cells you want to merge, in order from first to last. To include spaces between the cell data, you must include ,» «, within the formula. [i.e. =CONCATENATE(D5,» «,E5)]

Source

Step 4: Hit Enter. The data from your selected cells will be combined in the CONCATENATE cell.

Source

Why Can’t I Merge Cells in Excel?

A lot can go wrong if your formula or formatting isn’t set up correctly. If you’re struggling to merge cells, try these troubleshooting tips.

1. Ensure you’re not actively editing a cell you want to merge. The ‘Merge’ icon will be shaded out if you’re in the middle of making changes. To fix this, simply hit ‘Enter’ to stop editing or click onto another cell before clicking back to the cell you’d like to merge.

1. Check if one of the cells is part of an Excel table. Tables have a unique format that don’t allow merging. You can tell you’re on a Table if the ‘Chart Design’ or ‘Format’ tabs across the top of your workbook are highlighted in green and the ‘Merge’ icon is shaded out.

1. Look at the sharing permissions of the Excel workbook. If it’s not shared with you or is protected, you won’t be able to make any changes or merge cells.

How to Unmerge Cells

Maybe you got a little excited trying out your new skills and merged one cell too many. Don’t panic. Simply unmerge your cells by following these steps.

1. Highlight the cells you want to unmerge.
2. Under the Home tab, click the ‘Merge’ icon and choose ‘Unmerge Cells.’
3. Your cells will go back to the original formatting, but you will have lost the information from before the merge.
4. If you need that information, click ‘Command’ + Z (OS) or ‘CTRL’ +Z (Windows) to undo your actions until you see the data pop up.