Excel vba save all workbooks

To save an Excel workbook using VBA, you need to use the SAVE method to write a macro. And in that macro, you need to specify the workbook that you want to save and then use the SAVE method. When you run this code, it works like the keyboard shortcut (Control + S).

1. Specify the workbook hat you want to save.
2. Type a dot to get the list of all the properties and methods.
3. Select the “Save” method out of those or type “Save”
4. In the end, run the code to save the workbook.

In this tutorial, we will look at different ways that we can use to save a workbook. So make sure to open the VBA editor from the developer tab to use the code you have in this tutorial.

Helpful Links: Run a Macro – Macro Recorder – Visual Basic Editor – Personal Macro Workbook

Save the ActiveWorkbook

If you want to save the active workbook in that case you can use a code like the following code, instead of specifying the workbook by its name.

ActiveWorkbook.Save

When you use the ActiveWorkbook as the workbook, VBA always refers to the workbook which is active despite in which file you are writing the code.

Save the Workbook where you are Writing Code

If you want to save the file where you are writing the code you need to use “ThisWorkbook” instead of the workbook name.

ThisWorkbook.Save

Save All the Open Workbooks

Here we can use a loop to loop through all the workbooks that are open and save them one by one. Look at the below code.

Sub vba_save_workbook()
'variable to use as a workbook
Dim wb As Workbook
'For each to loop through each open workbook and save it
For Each wb In Workbooks
    wb.Save
Next wb
End Sub

The above code uses the FOR EACH loop in each workbook it uses the SAVE method to each file one by one.

Note: If you are trying to save a workbook with the SAVE method that is not saved already, Excel will show a dialog box to ask for your permission to save that file, and then you need to choose if you want to save that file on the default location in the default format.

Now here’s the point: As you are using a macro to save the workbook, that file should be saved in the macro-enabled format and the best way to deal with this situation is to use the SAVE AS method (we’ll see in the next section of this tutorial).

To SAVE a file that is not saved yet, using VBA,  you need to use the SAVE AS method. In this method, you can define the file name and the path where you want to save the file, and apart from that, there are ten more arguments that you can define.

expression.SaveAs (FileName, FileFormat, Password, WriteResPassword, ReadOnlyRecommended, CreateBackup, AccessMode, ConflictResolution, AddToMru, TextCodepage, TextVisualLayout, Local)

In the following code, you don’t have any argument with the “SAVE AS” method.

When you run this code, it asks you a few things, like, which format you want to use to save the file, do you want to replace the existing file that is already saved with the same name. So it’s better to define the use of some of the arguments.

Save As File on the Current Location

By default, VBA uses the current location to save the file. When you write code with the SAVE AS method and just specify the name that file straight goes to the current folder. You can see in the following code where you have the which saves the active workbook.

Sub save_as_file()
    ActiveWorkbook.SaveAs Filename:="myNewWorkbook"
End Sub

Save As File on a Specific Location

The filename argument also allows you to use the location path in case you want to use a different location to save the file.

Sub save_as_file()
    ActiveWorkbook.SaveAs _
        Filename:="C:UsersDellDesktopmyNewBook"
End Sub

In the above code, you have the path in the FileName argument and VBA uses that path to the file.

Note: You can also use this method to check if a workbook exists in a folder or not before you use the SAVE AS method to save it on a particular location and you can learn more about SAVE AS method from here.

More on VBA Workbooks

VBA Close Workbook | VBA Delete Workbook | VBA ThisWorkbook | VBA Rename Workbook | VBA Activate Workbook | VBA Combine Workbook | VBA Protect Workbook (Unprotect) | VBA Check IF a Workbook is Open | VBA Open Workbook | VBA Check IF an Excel Workbook Exists in a Folder| VBA Create New Workbook (Excel File)

• VBA Workbook

This VBA Tutorial covers how to save a file using the Save and Save As commands in VBA.

Save Workbook – VBA

The VBA Save command saves an Excel file similarly to clicking the Save icon or using the Save Shortcut (CTRL + S).

Save a Specified Workbook

To save a workbook, reference the workbook object and use the Save command.

Workbooks("savefile.xlsm").Save

Save the Active Workbook

Note: This is the current active workbook from with in the VBA code, which is different from ThisWorkbook which contains the running code.

ActiveWorkbook.Save

Save the Workbook Where the Code is Stored

ThisWorkbook.save

Save all Open Workbooks

This will loop through all open workbooks, saving each one.

Dim wb as workbook

For Each wb In Application.Workbooks
	wb.Save
Next wb

Save all open workbooks that were not opened ReadOnly

Note: opening a workbook in ReadOnly mode prevents the file from being saved.
To save the file you will need to use Save As and save the file with a different name.

Dim wb as workbook

For Each wb In Application.Workbooks
	If not wb.ReadOnly then
		wb.Save
	End if
Next wb

Save a workbook defined by a variable

This will save a workbook that was assigned to a workbook object variable.

Dim wb as workbook

set wb = workbooks("savefile.xlsm")
wb.save

Save a workbook defined by a string variable

This will save a workbook that’s name was saved to a string variable.

Dim wbstring as string

wbstring = "savefile.xlsm"
workbooks(wbstring).save

Save a workbook defined by the order it was opened.

Note: The first workbook opened would have 1, the second 2, etc.

workbooks(1).save

VBA Programming | Code Generator does work for you!

Save a workbook based on a cell value

This will save a workbook that’s name is found in a cell value.

Dim wbstring as string

wbstring = activeworkbook.sheets("sheet1").range("wb_save").value
workbooks(wbstring).save

Save As – VBA

The VBA Save As command saves an Excel file as a new file, similar to clicking the Save As icon or using the Save As Shortcut (Alt > F > A).
Above, we identified all the ways to specify which workbook to save. You can use those exact same methods to identify workbooks when using Save As.

Save As behaves similarly to Save, except you also need to specify the name of the new file.
In fact, Save As has many potential variables to define:

SaveAs Syntax:

workbook object .SaveAs(FileName, FileFormat, Password, WriteResPassword, _
ReadOnlyRecommended, CreateBackup, AccessMode, ConflictResolution, _
AddToMru,TextCodepage, TextVisualLayout, Local)

A full description of all of the SaveAs arguments is included below. For now we will focus on the most common examples.
Note: These arguments can be entered as string with parenthesis or as defined variables.

Save As Syntax Examples:

Workbook Save As – Same Directory

ActiveWorkbook.SaveAs Filename:= "new"

or

ActiveWorkbook.SaveAs "new"

or

Dim wbstring as string

wbstring = "new"
ActiveWorkbook.SaveAs Filename:= wbstring

AutoMacro | Ultimate VBA Add-in | Click for Free Trial!

Workbook Save As – New Directory

ActiveWorkbook.SaveAs Filename:= "C:new"

or

Dim wbstring as string

wbstring = "C:new"
ActiveWorkbook.SaveAs Filename:= wbstring=

Workbook Save As – New Directory, Specify File Extension

ActiveWorkbook.SaveAs Filename:= "C:new.xlsx"

or

Dim wbstring as string

wbstring = "C:new.xlsx"
ActiveWorkbook.SaveAs Filename:= wbstring

Workbook Save As – New Directory, Specify File Extension – Alt Method

You can also specify the file format in it’s own argument.

.xlsx = 51 '(52 for Mac)
.xlsm = 52 '(53 for Mac)
.xlsb = 50 '(51 for Mac)
.xls = 56 '(57 for Mac)

ActiveWorkbook.SaveAs Filename:= "C:new", FileFormat:= 51

Workbook Save As – Add Password to Open File

ActiveWorkbook.SaveAs Filename:= "C:new.xlsx", Password:= "password"

AutoMacro | Ultimate VBA Add-in | Click for Free Trial!

Workbook Save As – Add Password for Write Privileges

If correct password is not supplied then workbook opens as Read-Only

ActiveWorkbook.SaveAs Filename:= "C:new.xlsx", WriteRes:= "password"

Workbook Save As – Read-Only Recommended

TRUE to display a message box, recommending that the file is opened read-only.

ActiveWorkbook.SaveAs Filename:= "C:new.xlsx", ReadOnlyRecommended:= TRUE

Other Save As Examples

Create Save As Dialog Box

This Generates the Save As Dialog Box, prompting the user to Save the file.
Keep in mind that this simple code may not be appropriate in all cases.

Application.GetSaveAsFilename

AutoMacro | Ultimate VBA Add-in | Click for Free Trial!

Create Save As Dialog Box with Default File Name Provided

Application.GetSaveAsFilename InitialFilename:="test.xlsx"

Create Save As Dialog Box with Default File Name Provided

Application.GetSaveAsFilename InitialFilename:="test.xlsx"

Create & Save New Workbook

This will create a new workbook and immediately save it.

Dim wb As Workbook

Set wb = Workbooks.Add
Application.DisplayAlerts = False
wb.SaveAs Filename:=”c:Test1.xlsx”
Application.DisplayAlerts = True

Disable Save Alerts

As you work with saving in VBA, you may come across various Save Warnings or Prompts. To disable warnings, add this line of code:

Application.DisplayAlerts=False

and to re-able alerts:

Application.DisplayAlerts=True

In this tutorial, I will cover the how to work with workbooks in Excel using VBA.

In Excel, a ‘Workbook’ is an object that is a part of the ‘Workbooks’ collection. Within a workbook, you have different objects such as worksheets, chart sheets, cells and ranges, chart objects, shapes, etc.

With VBA, you can do a lot of stuff with a workbook object – such as open a specific workbook, save and close workbooks, create new workbooks, change the workbook properties, etc.

So let’s get started.

If you’re interested in learning VBA the easy way, check out my Online Excel VBA Training.

Referencing a Workbook using VBA

There are different ways to refer to a Workbook object in VBA.

The method you choose would depend on what you want to get done.

In this section, I will cover the different ways to refer to a workbook along with some example codes.

Using Workbook Names

If you have the exact name of the workbook that you want to refer to, you can use the name in the code.

Let’s begin with a simple example.

If you have two workbooks open, and you want to activate the workbook with the name – Examples.xlsx, you can use the below code:

Sub ActivateWorkbook()
Workbooks("Examples.xlsx").Activate
End Sub

Note that you need to use the file name along with the extension if the file has been saved. If it hasn’t been saved, then you can use the name without the file extension.

If you’re not sure what name to use, take help from the Project Explorer.

If you want to activate a workbook and select a specific cell in a worksheet in that workbook, you need to give the entire address of the cell (including the Workbook and the Worksheet name).

Sub ActivateWorkbook()
Workbooks("Examples.xlsx").Worksheets("Sheet1").Activate
Range("A1").Select
End Sub

The above code first activates Sheet1 in the Examples.xlsx workbook and then selects cell A1 in the sheet.

You will often see a code where a reference to a worksheet or a cell/range is made without referring to the workbook. This happens when you’re referring to the worksheet/ranges in the same workbook that has the code in it and is also the active workbook. However, in some cases, you do need to specify the workbook to make sure the code works (more on this in the ThisWorkbook section).

Using Index Numbers

You can also refer to the workbooks based on their index number.

For example, if you have three workbooks open, the following code would show you the names of the three workbooks in a message box (one at a time).

Sub WorkbookName()
MsgBox Workbooks(1).Name
MsgBox Workbooks(2).Name
MsgBox Workbooks(3).Name
End Sub

The above code uses MsgBox – which is a function that shows a message box with the specified text/value (which is the workbook name in this case).

One of the troubles I often have with using index numbers with Workbooks is that you never know which one is the first workbook and which one is the second and so on. To be sure, you would have to run the code as shown above or something similar to loop through the open workbooks and know their index number.

Excel treats the workbook opened first to have the index number as 1, and the next one as 2 and so on.

Despite this drawback, using index numbers can come in handy.

For example, if you want to loop through all the open workbooks and save all, you can use the index numbers.

In this case, since you want this to happen to all the workbooks, you’re not concerned about their individual index numbers.

The below code would loop through all the open workbooks and close all except the workbook that has this VBA code.

Sub CloseWorkbooks()
Dim WbCount As Integer
WbCount = Workbooks.Count
For i = WbCount To 1 Step -1
If Workbooks(i).Name <> ThisWorkbook.Name Then
Workbooks(i).Close
End If
Next i
End Sub

The above code counts the number of open workbooks and then goes through all the workbooks using the For Each loop.

It uses the IF condition to check if the name of the workbook is the same as that of the workbook where the code is being run.

If it’s not a match, it closes the workbook and moves to the next one.

Note that we have run the loop from WbCount to 1 with a Step of -1. This is done as with each loop, the number of open workbooks is decreasing.

ThisWorkbook is covered in detail in the later section.

Also read: How to Open Excel Files Using VBA (Examples)

Using ActiveWorkbook

ActiveWorkbook, as the name suggests, refers to the workbook that is active.

The below code would show you the name of the active workbook.

Sub ActiveWorkbookName()
MsgBox ActiveWorkbook.Name
End Sub

When you use VBA to activate another workbook, the ActiveWorkbook part in the VBA after that would start referring to the activated workbook.

Here is an example of this.

If you have a workbook active and you insert the following code into it and run it, it would first show the name of the workbook that has the code and then the name of Examples.xlsx (which gets activated by the code).

Sub ActiveWorkbookName()
MsgBox ActiveWorkbook.Name
Workbooks("Examples.xlsx").Activate
MsgBox ActiveWorkbook.Name
End Sub

Note that when you create a new workbook using VBA, that newly created workbook automatically becomes the active workbook.

Using ThisWorkbook

ThisWorkbook refers to the workbook where the code is being executed.

Every workbook would have a ThisWorkbook object as a part of it (visible in the Project Explorer).

‘ThisWorkbook’ can store regular macros (similar to the ones that we add-in modules) as well as event procedures. An event procedure is something that is triggered based on an event – such as double-clicking on a cell, or saving a workbook or activating a worksheet.

Any event procedure that you save in this ‘ThisWorkbook’ would be available in the entire workbook, as compared to the sheet level events which are restricted to the specific sheets only.

For example, if you double-click on the ThisWorkbook object in the Project Explorer and copy-paste the below code in it, it will show the cell address whenever you double-click on any of the cells in the entire workbook.

Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
MsgBox Target.Address
End Sub

While ThisWorkbook’s main role is to store event procedure, you can also use it to refer to the workbook where the code is being executed.

The below code would return the name of the workbook in which the code is being executed.

Sub ThisWorkbookName()
MsgBox ThisWorkbook.Name
End Sub

The benefit of using ThisWorkbook (over ActiveWorkbook) is that it would refer to the same workbook (the one that has the code in it) in all the cases. So if you use a VBA code to add a new workbook, the ActiveWorkbook would change, but ThisWorkbook would still refer to the one that has the code.

Creating a New Workbook Object

The following code will create a new workbook.

Sub CreateNewWorkbook()
Workbooks.Add
End Sub

When you add a new workbook, it becomes the active workbook.

The following code will add a new workbook and then show you the name of that workbook (which would be the default Book1 type name).

Sub CreateNewWorkbook()
Workbooks.Add
MsgBox ActiveWorkbook.Name
End Sub

Open a Workbook using VBA

You can use VBA to open a specific workbook when you know the file path of the workbook.

The below code will open the workbook – Examples.xlsx which is in the Documents folder on my system.

Sub OpenWorkbook()
Workbooks.Open ("C:UserssumitDocumentsExamples.xlsx")
End Sub

In case the file exists in the default folder, which is the folder where VBA saves new files by default, then you can just specify the workbook name – without the entire path.

Sub OpenWorkbook()
Workbooks.Open ("Examples.xlsx")
End Sub

In case the workbook that you’re trying to open doesn’t exist, you’ll see an error.

To avoid this error, you can add a few lines to your code to first check whether the file exists or not and if it exists then try to open it.

The below code would check the file location and if it doesn’t exist, it will show a custom message (not the error message):

Sub OpenWorkbook()
If Dir("C:UserssumitDocumentsExamples.xlsx") <> "" Then
Workbooks.Open ("C:UserssumitDocumentsExamples.xlsx")
Else
MsgBox "The file doesn't exist"
End If
End Sub

You can also use the Open dialog box to select the file that you want to open.

Sub OpenWorkbook()
If Dir("C:UserssumitDocumentsExamples.xlsx") <> "" Then
Workbooks.Open ("C:UserssumitDocumentsExamples.xlsx")
Else
MsgBox "The file doesn't exist"
End If
End Sub

The above code opens the Open dialog box. When you select a file that you want to open, it assigns the file path to the FilePath variable. Workbooks.Open then uses the file path to open the file.

In case the user doesn’t open a file and clicks on Cancel button, FilePath becomes False. To avoid getting an error in this case, we have used the ‘On Error Resume Next’ statement.

Saving a Workbook

To save the active workbook, use the code below:

Sub SaveWorkbook()
ActiveWorkbook.Save
End Sub

This code works for the workbooks that have already been saved earlier. Also, since the workbook contains the above macro, if it hasn’t been saved as a .xlsm (or .xls) file, you will lose the macro when you open it next.

If you’re saving the workbook for the first time, it will show you a prompt as shown below:

When saving for the first time, it’s better to use the ‘Saveas’ option.

The below code would save the active workbook as a .xlsm file in the default location (which is the document folder in my system).

Sub SaveWorkbook()
ActiveWorkbook.SaveAs Filename:="Test.xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
End Sub

If you want the file to be saved in a specific location, you need to mention that in the Filename value. The below code saves the file on my desktop.

Sub SaveWorkbook()
ActiveWorkbook.SaveAs Filename:="C:UserssumitDesktopTest.xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
End Sub

If you want the user to get the option to select the location to save the file, you can use call the Saveas dialog box. The below code shows the Saveas dialog box and allows the user to select the location where the file should be saved.

Sub SaveWorkbook()
Dim FilePath As String
FilePath = Application.GetSaveAsFilename
ActiveWorkbook.SaveAs Filename:=FilePath & ".xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
End Sub

Note that instead of using FileFormat:=xlOpenXMLWorkbookMacroEnabled, you can also use FileFormat:=52, where 52 is the code xlOpenXMLWorkbookMacroEnabled.

Saving All Open Workbooks

If you have more than one workbook open and you want to save all the workbooks, you can use the code below:

Sub SaveAllWorkbooks()
Dim wb As Workbook
For Each wb In Workbooks
wb.Save
Next wb
End Sub

The above saves all the workbooks, including the ones that have never been saved. The workbooks that have not been saved previously would get saved in the default location.

If you only want to save those workbooks that have previously been saved, you can use the below code:

Sub SaveAllWorkbooks()
Dim wb As Workbook
For Each wb In Workbooks
If wb.Path <> "" Then
wb.Save
End If
Next wb
End Sub

Saving and Closing All Workbooks

If you want to close all the workbooks, except the workbook that has the current code in it, you can use the code below:

Sub CloseandSaveWorkbooks()
Dim wb As Workbook
For Each wb In Workbooks
If wb.Name <> ThisWorkbook.Name Then
wb.Close SaveChanges:=True
End If
Next wb
End Sub

The above code would close all the workbooks (except the workbook that has the code – ThisWorkbook). In case there are changes in these workbooks, the changes would be saved. In case there is a workbook that has never been saved, it will show the save as dialog box.

Save a Copy of the Workbook (with Timestamp)

When I am working with complex data and dashboard in Excel workbooks, I often create different versions of my workbooks. This is helpful in case something goes wrong with my current workbook. I would at least have a copy of it saved with a different name (and I would only lose the work I did after creating a copy).

Here is the VBA code that will create a copy of your workbook and save it in the specified location.

Sub CreateaCopyofWorkbook()
ThisWorkbook.SaveCopyAs Filename:="C:UserssumitDesktopBackupCopy.xlsm"
End Sub

The above code would save a copy of your workbook every time you run this macro.

While this works great, I would feel more comfortable if I had different copies saved whenever I run this code. The reason this is important is that if I make an inadvertent mistake and run this macro, it will save the work with the mistakes. And I wouldn’t have access to the work before I made the mistake.

To handle such situations, you can use the below code that saves a new copy of the work each time you save it. And it also adds a date and timestamp as a part of the workbook name. This can help you track any mistake you did as you never lose any of the previously created backups.

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
ThisWorkbook.SaveCopyAs Filename:="C:UserssumitDesktopBackupCopy" & Format(Now(), "dd-mm-yy-hh-mm-ss-AMPM") & ".xlsm"
End Sub

The above code would create a copy every time you run this macro and add a date/time stamp to the workbook name.

Create a New Workbook for Each Worksheet

In some cases, you may have a workbook that has multiple worksheets, and you want to create a workbook for each worksheet.

This could be the case when you have monthly/quarterly reports in a single workbook and you want to split these into one workbook for each worksheet.

Or, if you have department wise reports and you want to split these into individual workbooks so that you can send these individual workbooks to the department heads.

Here is the code that will create a workbook for each worksheet, give it the same name as that of the worksheet, and save it in the specified folder.

Sub CreateWorkbookforWorksheets()
Dim ws As Worksheet
Dim wb As Workbook
For Each ws In ThisWorkbook.Worksheets
Set wb = Workbooks.Add
ws.Copy Before:=wb.Sheets(1)
Application.DisplayAlerts = False
wb.Sheets(2).Delete
Application.DisplayAlerts = True
wb.SaveAs "C:UserssumitDesktopTest" & ws.Name & ".xlsx"
wb.Close
Next ws
End Sub

In the above code, we have used two variable ‘ws’ and ‘wb’.

The code goes through each worksheet (using the For Each Next loop) and creates a workbook for it. It also uses the copy method of the worksheet object to create a copy of the worksheet in the new workbook.

Note that I have used the SET statement to assign the ‘wb’ variable to any new workbook that is created by the code.

You can use this technique to assign a workbook object to a variable. This is covered in the next section.

Assign Workbook Object to a Variable

In VBA, you can assign an object to a variable, and then use the variable to refer to that object.

For example, in the below code, I use VBA to add a new workbook and then assign that workbook to the variable wb. To do this, I need to use the SET statement.

Once I have assigned the workbook to the variable, all the properties of the workbook are made available to the variable as well.

Sub AssigntoVariable()
Dim wb As Workbook
Set wb = Workbooks.Add
wb.SaveAs Filename:="C:UserssumitDesktopExamples.xlsx"
End Sub

Note that the first step in the code is to declare ‘wb’ as a workbook type variable. This tells VBA that this variable can hold the workbook object.

The next statement uses SET to assign the variable to the new workbook that we are adding. Once this assignment is done, we can use the wb variable to save the workbook (or do anything else with it).

Looping through Open Workbooks

We have already seen a few examples codes above that used looping in the code.

In this section, I will explain different ways to loop through open workbooks using VBA.

Suppose you want to save and close all the open workbooks, except the one with the code in it, then you can use the below code:

Sub CloseandSaveWorkbooks()
Dim wb As Workbook
For Each wb In Workbooks
If wb.Name <> ThisWorkbook.Name Then
wb.Close SaveChanges:=True
End If
Next wb
End Sub

The above code uses the For Each loop to go through each workbook in the Workbooks collection. To do this, we first need to declare ‘wb’ as the workbook type variable.

In every loop cycle, each workbook name is analyzed and if it doesn’t match the name of the workbook that has the code, it’s closed after saving its content.

The same can also be achieved with a different loop as shown below:

Sub CloseWorkbooks()
Dim WbCount As Integer
WbCount = Workbooks.Count
For i = WbCount To 1 Step -1
If Workbooks(i).Name <> ThisWorkbook.Name Then
Workbooks(i).Close SaveChanges:=True
End If
Next i
End Sub

The above code uses the For Next loop to close all the workbooks except the one that has the code in it. In this case, we don’t need to declare a workbook variable, but instead, we need to count the total number of open workbooks. When we have the count, we use the For Next loop to go through each workbook. Also, we use the index number to refer to the workbooks in this case.

Note that in the above code, we are looping from WbCount to 1 with Step -1. This is needed as with each loop, the workbook gets closed and the number of workbooks gets decreased by 1.

Error while Working with the Workbook Object (Run-time error ‘9’)

One of the most common error you may encounter when working with workbooks is – Run-time Error ‘9’ – Subscript out of range.

Generally, VBA errors are not very informative and often leave it to you to figure out what went wrong.

Here are some of the possible reasons that may lead to this error:

•  The workbook that you’re trying to access does not exist. For example, if I am trying to access the fifth workbook using Workbooks(5), and there are only 4 workbooks open, then I will get this error.
• If you’re using a wrong name to refer to the workbook. For example, if your workbook name is Examples.xlsx and you use Example.xlsx. then it will show you this error.
• If you haven’t saved a workbook, and you use the extension, then you get this error. For example, if your workbook name is Book1, and you use the name Book1.xlsx without saving it, you will get this error.
• The workbook you’re trying to access is closed.

Get a List of All Open Workbooks

If you want to get a list of all the open workbooks in the current workbook (the workbook where you’re running the code), you can use the below code:

Sub GetWorkbookNames()
Dim wbcount As Integer
wbcount = Workbooks.Count
ThisWorkbook.Worksheets.Add
ActiveSheet.Range("A1").Activate
For i = 1 To wbcount
Range("A1").Offset(i - 1, 0).Value = Workbooks(i).Name
Next i
End Sub

The above code adds a new worksheet and then lists the name of all the open workbooks.

If you want to get their file path as well, you can use the below code:

Sub GetWorkbookNames()
Dim wbcount As Integer
wbcount = Workbooks.Count
ThisWorkbook.Worksheets.Add
ActiveSheet.Range("A1").Activate
For i = 1 To wbcount
Range("A1").Offset(i - 1, 0).Value = Workbooks(i).Path & "" & Workbooks(i).Name
Next i
End Sub

Open the Specified Workbook by Double-clicking on the Cell

If you have a list of file paths for Excel workbooks, you can use the below code to simply double-click on the cell with the file path and it will open that workbook.

Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Workbooks.Open Target.Value
End Sub

This code would be placed in the ThisWorkbook code window.

To do this:

• Double click on the ThisWorkbook object in the project explorer. Note that the ThisWorkbook object should be in the workbook where you want this functionality.
• Copy and paste the above code.

Now, if you have the exact path of the files that you want to open, you can do that by simply double-clicking on the file path and VBA would instantly open that workbook.

Where to Put the VBA Code

Wondering where the VBA code goes in your Excel workbook?

Excel has a VBA backend called the VBA editor. You need to copy and paste the code into the VB Editor module code window.

Here are the steps to do this:

1. Go to the Developer tab.
2. Click on the Visual Basic option. This will open the VB editor in the backend.
3. In the Project Explorer pane in the VB Editor, right-click on any object for the workbook in which you want to insert the code. If you don’t see the Project Explorer go to the View tab and click on Project Explorer.
4. Go to Insert and click on Module. This will insert a module object for your workbook.
5. Copy and paste the code in the module window.

You May Also Like the Following Excel VBA Tutorials:

• How to Record a Macro in Excel.
• Creating a User Defined Function in Excel.
• How to Create and Use Add-in in Excel.
• How to Resue Macros by placing it in the Personal Macro Workbook.
• Get the List of File Names from a Folder in Excel (with and without VBA).
• How to Use Excel VBA InStr Function (with practical EXAMPLES).
• How to Sort Data in Excel using VBA (A Step-by-Step Guide).