Box around letters in word

I learnt a new word the other day: macron. So, what’s a macron? It’s a bar or line over the top of a word or letter, such as those used to indicate the mean in mathematical equations.

And why did I learn this word? Because Stephanie, one of my team’s authors, wanted a line over the top of her capital D. She could get the line using Microsoft Word’s equation editor, but as she had to define what the D with the overbar/overline/overscore meant, she wanted to insert it into the Terms list too. However, it wouldn’t copy properly. So she asked me.

Equations are one of the few areas in Word that I’ve never tackled, so, as I told Steph, it was all a new experience for me. I confirmed that copying the D with the overbar was problematic when I used the equation editor, so I figured there had to be another way to get a line on top of a letter. And there is. In fact, there are several ways and the method you choose should be the one that gives you the result you’re looking for, taking into account your circumstances (e.g. will you have to copy from one document to another? is the method easy for you to use/remember? do you have to create a lot of these? is the font important?).

I Googled the problem and after some hunting around I discovered some great resources (listed at the end of this post), and discovered that the line over the top of a letter is called a ‘macron’. Armed with that little piece of information, back to Google, where I found out more about this beastie.

Please note: Some letters already have a macron built-in. Check the Windows Character Map (Start > All Programs > Accessories > System Tools > Character Map on Vista)  or use a program such as BabelMap to see if there’s an existing character you can use — if there is, use that as it’s the quickest and simplest method. If your letter doesn’t have an existing character (D doesn’t), you’ll have to create it yourself, which is what the rest of this article is about.

The methods below show how to create your own letter with a macron (I’ll use D as the example). I’ve used Word 2007 in these instructions, but Word 2003 and later versions of Word is similar for the most part.

Easiest ever method!

September 2018: Anik8G, a commenter on this post, shared his solution and it’s super easy. You can probably ignore all other solutions and use his. He has a short YouTube video that describes what he does: https://www.youtube.com/watch?v=3_h7ukThU_4, but you’ll likely need a little more information for it to work.

His solution uses the built-in Math AutoCorrect feature, which you need to turn on if it’s not already on. It’s under File > Options > Proofing. Click the AutoCorrect Options button, then select the Math AutoCorrect tab and check the two check boxes.

Look at the Replace and With lists, and note down the Replace string you want to add over your letter (in this example, I needed bar). Click OK and get back to your document. Now, type your letter, followed immediately by the Replace string, then a space. For my example, I typed Dbar<space> and that automatically added a bar over the top of the letter. Just brilliant!

Method 1: Use Word’s Equation Editor

Option 1: Use a built-in accent character

1. Go to the Insert tab > Symbols group (far right), then click Equation.
   
2. Select Insert New Equation from the bottom of the list.
   
   This opens the Equation Tools > Design tab and puts a Type equation here box into your document.
   
3. Click Accent on the Design tab > Structures group.
4. Scroll down past the Boxed Formulas section to the Overbars and Underbars section.
5. Click the Overbar icon.
   
   You’ll see something like this in your document:
   
6. Click in the dashed box, then type D.
7. Click outside the equation box to hide it; you can show it again by clicking on the D with the macron.

Your character will look like this:

Option 2: Create your own

1. Go to the Insert tab > Symbols group (far right), then click Equation.
2. Select Insert New Equation from the bottom of the list. This opens the Equation Tools > Design tab and puts a Type equation here box into your document.
3. Type D in the equation box, then select it.
4. Click Accent on the Design tab > Structures group.
5. Click the Bar icon.
   
   You’ll see something like this:
   
6. Click in the dashed box, then type D.
7. Click away from the equation box to hide it; you can show it again by clicking on the D with the macron.

Your character will look like this:

Note that the macron created using this option is slightly narrower than that created using the built-in accent (above), and is closer to the top of the letter.

Advantages:

• Quick and easy
• You get a properly formatted macron over the letter

Disadvantages:

• You may not be able to change the font (I wasn’t able to change it from Cambria Math)
• If you copy this equation from one Word document to another, you must remember to select Keep Source Formatting as soon as you paste it, otherwise the letter and its macron are treated as two separate characters.

Method 2: Use Word’s Equation field, with switches

To use this method, you need to know the character code to create a macron. If you have a numeric keypad, it’s Alt+0175; if you have a keyboard without a numeric keypad, it’s 00af (they are zeros) followed immediately by Alt+x. Test these key combinations in your document first to make sure you can create the macron successfully with the keyboard.

Option 1: Using the built-in field codes and switches

1. Go to the Insert tab > Text group, then click Quick Parts. (Word 2003: Insert > Field)
   
2. Select Field.
3. Scroll down the list of Field names and select Eq.
4. Click Field Codes.
   
5. Click Options.
   
6. Select the O() switch, then click Add to Field.
   
7. In the Field codes: EQ Instructions box, type D,<macron_code> between the parentheses.
   The <macron_code> is the key combination you tested earlier to see if it worked — either Alt+0175 on the numeric keypad, or 00af followed by Alt+x. Make sure you also insert the comma between the D and the macron.
   
8. Click OK to close the Field Options dialog box.
9. Click OK again to close the Field dialog box.

Your letter with its macron should look like that below (I have field shading turned on); change the font if you don’t see the macron:

Option 2: Using the built-in field codes and Equation Editor

1. Go to the Insert tab > Text group, then click Quick Parts. (Word 2003: Insert > Field)
2. Select Field.
3. Scroll down the list of Field names and select Eq.
4. Click Equation Editor.
   
5. A text box is added to the document, along with a floating Equation toolbar.
   
6. Click the Overbar icon, then the icon for the bar.
   
7. Type the letter D in the text box.
   
8. Close the Equation toolbar, then click away from the text box.

You should see something like this:

Option 3: Create your own field

1. Press Ctrl+F9 to insert an empty field.
   
2. Type EQ<space>O (D,<macron_code>) between the curly brackets of the field.
   
3. Right-click on the field, then select Toggle Field Codes to show the result:
   

Advantages:

• Quick and relatively easy

Disadvantages:

• Some fonts, such as Calibri (Body), do not display the macron. If you don’t see the macron over the letter, try changing the font — Arial, Times New Roman (TNR), Courier New all work; however, TNR puts the macron very close to the top of the D, making it hard to read. You’ll need to experiment with fonts.
• You need to know how to create a macron using the keyboard.
• You should have a basic understanding of field codes and switches.

Method 3: Create a box around the letter showing only the top border

1. Go to the Insert tab > Text group, then click Quick Parts. (Word 2003: Insert > Field)
2. Select Field.
3. Scroll down the list of Field names and select Eq.
4. Click Field Codes.
5. Click Options.
6. Select the X() switch, then click Add to Field.
   
7. In the Field codes: EQ Instructions box, type D between the parentheses.
8. Next, type a space after the X followed by to (for ‘top border’) then another space.
   
9. Click OK to close the Field Options dialog box.
10. Click OK again to close the Field dialog box.

Your letter with its macron should look like that below; change the font if you don’t see the macron:

Advantages:

• Quick and relatively easy

Disadvantages:

• You end up with a large space after the letter so if it’s to be part of a word, it will look strange
• You get a longer line over the letter.
• You should have a basic understanding of field codes and switches.

Method 4: Cheat!

Seriously. Sometimes we can overthink stuff, and if it’s a one-off and you’re limited for time, using a workaround may be your best option.

1. Either create a graphic of what you want using graphics software, or take a screen capture of the full equation then crop it to show just what you want.
2. Insert the graphic into the document.

Advantages:

• Quick and easy if you know how to use graphics and/or screen capture software
• Useful if you only have to do a few

Disadvantages:

• Can’t be edited easily if you need to change the letter in the graphic — you may have to create a new graphic or screen shot

See also:

• https://wordribbon.tips.net/T004314_Overlining_Characters.html
• BabelMap — 100,000+ Unicode characters: https://cybertext.wordpress.com/2009/08/14/all-100k-unicode-characters-and-more/
• Suzanne Barnhill’s excellent article on creating overbars: http://wordfaqs.ssbarnhill.com/Overbar.htm (Suzanne is a Microsoft Word MVP)
• Wikipedia article on macrons: https://en.wikipedia.org/wiki/Macron_(diacritic)

[Links last checked September 2018]

With this online tool, you can add a frame around any text. The frame is made out of ASCII and Unicode characters and to draw it, the program computes the bounding box that surrounds the entire input text. The input text can be just a single letter or a digit, a word, a quote, a paragraph of text, or even a vertical list. In the «Box Style» option, you can choose from several different box styles. For example, the «ASCII Box with Corners» style uses the simplest characters available on any keyboard, such as «+» for corners, «-» for horizontal lines, and «|» for vertical lines. The «Unicode Box with Borders» style uses a continuous border line that’s only found on modern computers, and the «Unicode Thick Box» style uses filled block elements for the border. You can also create your own unique box style. To do this, switch to the «Custom» mode and in the options next to it, set the eight symbols that form the box. You can separately customize the top, bottom, left, and right borders, as well as the top-left, top-right, bottom-left-, and bottom-right corners of the box. By default, the box will fit around the text as tightly as possible but to make it looser, you can add padding between the text and the edges of the box. The «Vertical Padding» option adds empty space above and below the text, and the «Horizontal Padding» option adds extra space to the left and right sides of the text. The padding area is usually filled with regular space characters, but if necessary, you can set other symbols to fill the background area inside the box via the «Padding Fill Character» option. If the input text has more than one line, then you can choose how many boxes to draw for your text. For example, you can select the «One Box for All Text» mode and draw one big box around all lines of text. Or you can switch to the «Box for Each Line» mode and draw a border around each individual line of the text. Or you can select the «Box for Each Paragraph» mode and create boxes around individual text paragraphs. Textabulous!

When you need to highlight a portion of text, it’s not always convenient to use a text box. To emphasize a paragraph while keeping it within the main content, you can put a border around that text in Word instead.

You can put a border around specific text, such as a single sentence, or an entire paragraph. Let’s look at how to do both as well as customize the border.

Select the text you want to surround with a border and go to the Home tab. Click the drop-down arrow next to Borders and choose “Borders and Shading.”

Use a Setting option on the left or the buttons below Preview on the right to add the border around the text. You can also adjust the Style, Color, and Width settings in the center of the window to customize the line for the border.

RELATED: How to Add Borders to or Change Borders on a Table in Word

In the Apply To drop-down box on the right side, select “Text” and when you finish, click “OK” to apply the border.

You’ll then see your text outlined with a border.

Put a Border Around a Paragraph

If you have an entire paragraph you’d like to place a border around, the process is similar. However, you have a few extra customization options.

RELATED: How to Put Borders Around Images in Microsoft Word

Select the paragraph you want to surround with a border and head to the Home tab. Click the Borders drop-down arrow and pick one of the quick border options such as Outside Borders or All Borders.

This places the border around the paragraph from margin to margin on each side and gives you a fast way to add the border. But you can also customize the border and adjust the space between the border and the text.

Select the bordered paragraph, click the drop-down arrow next to Borders on the Home tab, and choose “Borders and Shading.”

Like with customizing the border for specific text, you can change the Style, Color, and Width for the border line. Confirm that “Paragraph” is selected in the Apply To drop-down box. Then, to adjust the spacing, click “Options” on the right side of the window.

At the top, use the arrows or enter the number of points for the spacing on the top, bottom, left, and right of the border in relation to the text. As you make the changes, you’ll see a preview directly below. Click “OK” when you finish.

Make any other adjustments you want in the Borders and Shading window and click “OK” when you’re done to apply the border.

RELATED: How to Change Page Margins in Word

Remove a Border From Text in Word

If you decide later to remove a border you’ve added, it takes only a few clicks. Select the text or paragraph containing the border and revisit the Home tab. Click the drop-down arrow next to Borders and pick “No Border.”

Text boxes in Word are great ways to call out portions of text. But if you want to keep your text in line with the rest and simply highlight a small piece, consider surrounding it in a border. For other types of borders, take a look at how to create a page border in Word.

READ NEXT

• › How to Mirror or Flip Text in Microsoft Word
• › How to Outline Text in Adobe Photoshop
• › Google+ Will Come to a Final End on July 5, 2023
• › The Best DNS Servers for Secure Browsing
• › Get to Your Windows 11 Desktop: 7 Fastest Methods
• › Universal Audio Volt 2 Review: A Workhorse Audio Interface With Vintage Charm
• › Why the Right-Click Menu in Windows 11 Is Actually Good
• › Why One Ultrawide Is Better Than Two Monitors