Adding sheets in excel vba

Once you start learning VBA one of the coolest things you can do is to write a VBA code to insert new a worksheet in a workbook.

Well, there is already a shortcut key to insert a new worksheet or you can also use the normal option but the benefit of using a VBA code is you can add multiple worksheets with a single click and you can also define that where you want to add it.

For this, you need to use the Sheets.Add method, and in this post, we will be learning how to use it to add one or more worksheets in a workbook.

Sheets.Add Method

Sheets.Add ([Before], [After], [Count], [Type])

• Before: To add a new sheet before a sheet.
• After: To add the new sheet before a sheet.
• Count: Number of sheets to add.
• Type: Type of the sheet you want to add (LINK)

Open the visual basic editor and follow these steps.

• First, you need to enter Sheets.Add method.
• Then you need to define the place to add the new sheet (Before or After).
• Next thing is to enter the count of worksheets.
• In the end, the type of sheet.

Different Ways to Add New Sheets in a Workbook using a VBA Code

Below you have different ways to add a new sheet to a workbook:

1. Add a Single Sheet

To add a single sheet, you can use the below code, where you didn’t specify any argument.

Sub SheetAddExample1()
ActiveWorkbook.Sheets.Add
End Sub

This code tells Excel to add a sheet in the active workbook, but as you don’t have any argument it will use the default values and add one worksheet(xlWorksheet) before the active sheet.

Here’s one more way to write this, check out the below code.

Sub SheetAddExample2()
Sheets.Add
End Sub

As you are already in the active workbook you can use the below code as well. It does the same thing.

2. Add Multiple Sheets

To add multiple sheets in one go, you just need to define the COUNT argument with the number of sheets you want to add.

Sub AddSheets3()
Sheets.Add Count:=5
End Sub

Now the count of the sheets that you have defined is 5, so when you run this code it instantly adds the five new sheets in the workbook.

3. Add a Sheet with a Name

If you want to rename the sheet after adding it, you can use the following code:

Sub AddNewSheetswithNameExample1()
Sheets.Add.Name = "myNewSHeet"
End Sub

In the above code, we have used the name object (LINK) which helps you to specify the name of a sheet.

4. Add a Sheet with a Name from a Cell

You can also take the value to use as the sheet’s name from a cell.

Sub AddNewSheetswithNameExample2()
Sheets.Add.Name = Range("A1")
End Sub

In the above code, cell A1 is used to get the name for the new sheet.

5. Add a Sheet After/Before a Specific Sheet

As these arguments are already there in the Sheets.Add where you can specify the sheet to add a new sheet before or after it.

Sub AddSheetsExample5()
Sheets.Add Before:=Worksheets("mySheet")
Sheets.Add After:=Worksheets("mySheet")
End Sub

Now in the above code, you have two lines of code that you have used before and after an argument in the Sheet.Add method. So, when you run this code it adds two sheets one is before and one is after the “mySheet”.

6. Add a New Sheet at Beginning

By using the before argument using you can also add a sheet at the beginning of the sheets that you have in the workbook.

So basically, what we are going to do is we’re going to specify the sheet number instead of the sheet name.

Sub AddSheetsExample6()
Sheets.Add Before:=Sheets(1)
End Sub

In the above code, you have used sheet number (1) that tells VBA to add the sheet before the sheet which is in the first position in all the worksheets. In this way, it will always add the new sheet at the beginning.

7. Add a New Sheet at the End (After the Last Sheet)

To add a new sheet in the end you need to write the code in a different way. So, for this, you need to know how many sheets there in the workbook are so that you can add a new sheet at the end.

Sub AddSheetsExample8()
Sheets.Add After:=Sheets(Sheets.Count)
End Sub

In the above code, Sheet.Count returns the count of the sheets that you have in the workbook, and as you have defined the after argument it adds the new sheet after the last sheet in the workbook.

8. Add Multiple Sheets and use Names from a Range

The following code counts rows from the range A1:A7. After that, it loops to add sheets according to the count from the range and uses values from the range to name the sheet while adding it.

Sub AddSheetsExample9()

Dim sheets_count As Integer
Dim sheet_name As String
Dim i As Integer

sheet_count = Range("A1:A7").Rows.Count

For i = 1 To sheet_count
  sheet_name = Sheets("mySheet").Range("A1:A7").Cells(i, 1).Value
  Worksheets.Add().Name = sheet_name
Next i

End Sub

But with the above code, there could be a chance that the sheet name you want to add already exists or you have a blank cell in the name range.

In that case, you need to write a code that can verify if the sheet with the same name already exists or not and whether the cell from where you want to take the sheet name is blank or not.

If both conditions are fulfilled only then it should add a new sheet. Let me put it in steps two steps:

First, you need to write an Excel User Defined Function to check if a sheet with the same name already exists or not.

Function SheetCheck(sheet_name As String) As Boolean

Dim ws As Worksheet

SheetCheck = False
 
For Each ws In ThisWorkbook.Worksheets
 
    If ws.Name = sheet_name Then
    
        SheetCheck = True
        
    End If
 
Next
 
End Function

Second, you need to write a code using this function and that code should also check if the name cell is blank or not.

Sub AddMultipleSheet2()

Dim sheets_count As Integer
Dim sheet_name As String
Dim i As Integer

sheet_count = Range("A1:A7").Rows.Count

For i = 1 To sheet_count

    sheet_name = Sheets("mySheet").Range("A1:A10").Cells(i, 1).Value
    
    If SheetCheck(sheet_name) = False And sheet_name <> "" Then
    Worksheets.Add().Name = sheet_name
    End If

Next i

End Sub

Now in the above code, you have used the VBA IF Statement and in this statement, you have the sheet check function which checks for the sheet name and then you have a condition to check if the name cell has a blank value.

Sample File

• VBA Worksheet – Excel VBA Examples – VBA Tutorial

This tutorial will discuss how to add / insert worksheets using VBA.

This simple macro will add a Sheet before the ActiveSheet:

Sub Add ()
    Sheets.Add
End Sub

After inserting a Sheet, the new Sheet becomes the ActiveSheet. You can then use the ActiveSheet object to work with the new Sheet (At the bottom of this article we will show how to insert a new sheet directly to a variable).

ActiveSheet.Name = "NewSheet"

Add Sheet with Name

You can also define a Sheet name as you create the new Sheet:

Sheets.Add.Name = "NewSheet"

Create New Sheet with Name from a Cell

Or use a cell value to name a new Sheet:

Sheets.Add.Name = range("a3").value

Add Sheet Before / After Another Sheet

You might also want to choose the location of where the new Sheet will be inserted. You can use the After or Before properties to insert a sheet to a specific location in the workbook.

Insert Sheet After Another Sheet

This code will insert the new sheet AFTER another sheet:

Sheets.Add After:=Sheets("Input")

This will insert a new Sheet AFTER another sheet and specify the Sheet name:

Sheets.Add(After:=Sheets("Input")).Name = "NewSheet"

Notice the extra parenthesis required in the second example (the first example will generate an error if the second parenthesis are added).

or Before:

Sheets.Add(Before:=Sheets("Input")).Name = "NewSheet"

In these examples we explicitly named the Sheet used to determine the sheet location. Often you’ll want to use the Sheet Index number instead, so that you can insert the sheet to the beginning or end of the Workbook:

Add Sheet To End of Workbook

To add a Sheet to the end of the workbook:

Sheets.Add After:=Sheets(Sheets.Count)

Add Sheet To Beginning of Workbook:

To add a Sheet to the beginning of the workbook:

Sheets.Add(Before:=Sheets(1)).Name = "FirstSheet"

Add Sheet to Variable

This code assigns the new Sheet to a variable as the sheet is created:

Dim ws As Worksheet
Set ws = Sheets.Add

From here you can reference the new sheet with the variable ‘ws’:

ws.name = "VarSheet"

More Add Sheet Examples

Create Sheet if it Doesn’t Already Exist

You might want to create a sheet only if it doesn’t already exist.

VBA Programming | Code Generator does work for you!

Create Worksheets From List of Names

The following routine will look at the contents of a single column set up Excel worksheets within the current workbook with these names. It makes a call to another function to see if a sheet with that name already exists, and if so the sheet isn’t created.

Private Sub CommandButton1_Click()

Call CreateWorksheets(Sheets("Sheet2").Range("A1:a10"))

End Sub

Sub CreateWorksheets(Names_Of_Sheets As Range)
Dim No_Of_Sheets_to_be_Added As Integer
Dim Sheet_Name As String
Dim i As Integer

No_Of_Sheets_to_be_Added = Names_Of_Sheets.Rows.Count

For i = 1 To No_Of_Sheets_to_be_Added

Sheet_Name = Names_Of_Sheets.Cells(i, 1).Value

'Only add sheet if it doesn't exist already and the name is longer than zero characters

If (Sheet_Exists(Sheet_Name) = False) And (Sheet_Name <> "") Then
    Worksheets.Add().Name = Sheet_Name
End If

Next i

End Sub

Function Sheet_Exists(WorkSheet_Name As String) As Boolean
Dim Work_sheet As Worksheet

Sheet_Exists = False

For Each Work_sheet In ThisWorkbook.Worksheets

    If Work_sheet.Name = WorkSheet_Name Then
        Sheet_Exists = True
    End If

Next

End Function

So if we have the following text in cells A1:A30 in Sheet 2:

Then the following sheets will be created:

Note that although “Dog” appears twice, only one sheet is created.

To download the .XLS file for this tutorial, click here.

<<Return to VBA Examples

Создание, копирование, перемещение и удаление рабочих листов Excel с помощью кода VBA. Методы Sheets.Add, Worksheet.Copy, Worksheet.Move и Worksheet.Delete.

Создание новых листов

Создание новых рабочих листов осуществляется с помощью метода Sheets.Add.

Синтаксис метода Sheets.Add

expression.Add [Before, After, Count, Type]

где expression — переменная, представляющая собой объект Sheet.

Компоненты метода Sheets.Add

• Before* — необязательный параметр типа данных Variant, указывающий на лист, перед которым будет добавлен новый.
• After* — необязательный параметр типа данных Variant, указывающий на лист, после которого будет добавлен новый.
• Count — необязательный параметр типа данных Variant, указывающий, сколько листов будет добавлено (по умолчанию — 1).
• Type — необязательный параметр типа данных Variant, указывающий тип листа: xlWorksheet** (рабочий лист) или xlChart (диаграмма), по умолчанию — xlWorksheet.

*Если Before и After не указаны, новый лист, по умолчанию, будет добавлен перед активным листом.

**Для создания рабочего листа (xlWorksheet) можно использовать метод Worksheets.Add, который для создания диаграмм уже не подойдет.

Примеры создания листов

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

‘Создание рабочего листа: Sheets.Add Worksheets.Add ThisWorkbook.Sheets.Add After:=ActiveSheet, Count:=2 Workbooks(«Книга1.xlsm»).Sheets.Add After:=Лист1 Workbooks(«Книга1.xlsm»).Sheets.Add After:=Worksheets(1) Workbooks(«Книга1.xlsm»).Sheets.Add After:=Worksheets(«Лист1») ‘Создание нового листа с заданным именем: Workbooks(«Книга1.xlsm»).Sheets.Add.Name = «Мой новый лист» ‘Создание диаграммы: Sheets.Add Type:=xlChart ‘Добавление нового листа перед ‘последним листом рабочей книги Sheets.Add Before:=Sheets(Sheets.Count) ‘Добавление нового листа в конец Sheets.Add After:=Sheets(Sheets.Count)

• Лист1 в After:=Лист1 — это уникальное имя листа, указанное в проводнике редактора VBA без скобок.
• Лист1 в After:=Worksheets(«Лист1») — это имя на ярлыке листа, указанное в проводнике редактора VBA в скобках.

Создаваемый лист можно присвоить объектной переменной:

Dim myList As Object ‘В активной книге Set myList = Worksheets.Add ‘В книге «Книга1.xlsm» Set myList = Workbooks(«Книга1.xlsm»).Worksheets.Add ‘Работаем с переменной myList.Name = «Listok1» myList.Cells(1, 1) = myList.Name ‘Очищаем переменную Set myList = Nothing

Если создаваемый лист присваивается объектной переменной, он будет помещен перед активным листом. Указать дополнительные параметры невозможно.

Копирование листов

Копирование рабочих листов осуществляется с помощью метода Worksheet.Copy.

Синтаксис метода Worksheet.Copy

expression.Copy [Before, After]

где expression — переменная, представляющая собой объект Worksheet.

Компоненты метода Worksheet.Copy

• Before* — необязательный параметр типа данных Variant, указывающий на лист, перед которым будет добавлена копия.
• After* — необязательный параметр типа данных Variant, указывающий на лист, после которого будет добавлена копия.

*Если Before и After не указаны, Excel создаст новую книгу и поместит копию листа в нее. Если скопированный лист содержит код в проекте VBA (в модуле листа), он тоже будет перенесен в новую книгу.

Примеры копирования листов

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

‘В пределах активной книги ‘(уникальные имена листов) Лист1.Copy After:=Лист2 ‘В пределах активной книги ‘(имена листов на ярлычках) Worksheets(«Лист1»).Copy Before:=Worksheets(«Лист2») ‘Вставить копию в конец Лист1.Copy After:=Sheets(Sheets.Count) ‘Из одной книги в другую Workbooks(«Книга1.xlsm»).Worksheets(«Лист1»).Copy _ After:=Workbooks(«Книга2.xlsm»).Worksheets(«Лист1») ‘Один лист активной книги в новую книгу Лист1.Copy ‘Несколько листов активной книги в новую книгу* Sheets(Array(«Лист1», «Лист2», «Лист3»)).Copy ‘Все листы книги с кодом в новую книгу ThisWorkbook.Worksheets.Copy

* Если при копировании в новую книгу нескольких листов хотя бы один лист содержит умную таблицу — копирование невозможно. Один лист, содержащий умную таблицу, копируется в новую книгу без проблем.

Если рабочие книги указаны как элементы коллекции Workbooks, в том числе ActiveWorkbook и ThisWorkbook, листы нужно указывать как элементы коллекции Worksheets, использование уникальных имен вызовет ошибку.

Перемещение листов

Перемещение рабочих листов осуществляется с помощью метода Worksheet.Move.

Синтаксис метода Worksheet.Move

expression.Move [Before, After]

где expression — переменная, представляющая собой объект Worksheet.

Компоненты метода Worksheet.Move

• Before* — необязательный параметр типа данных Variant, указывающий на лист, перед которым будет размещен перемещаемый лист.
• After* — необязательный параметр типа данных Variant, указывающий на лист, после которого будет размещен перемещаемый лист.

*Если Before и After не указаны, Excel создаст новую книгу и переместит лист в нее.

Примеры перемещения листов

Простые примеры перемещения листов:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

‘В пределах активной книги ‘(уникальные имена листов) Лист1.Move After:=Лист2 ‘В пределах активной книги ‘(имена листов на ярлычках) Worksheets(«Лист1»).Move Before:=Worksheets(«Лист2») ‘Размещение после последнего листа: Лист1.Move After:=Sheets(Sheets.Count) ‘Из одной книги в другую Workbooks(«Книга1.xlsm»).Worksheets(«Лист1»).Move _ After:=Workbooks(«Книга2.xlsm»).Worksheets(«Лист1») ‘В новую книгу Лист1.Move

Если рабочие книги указаны как элементы коллекции Workbooks, в том числе ActiveWorkbook и ThisWorkbook, листы нужно указывать как элементы коллекции Worksheets, использование уникальных имен вызовет ошибку.

Перемещение листа «Лист4» в позицию перед листом, указанным как по порядковому номеру, так и по имени ярлыка:

Sub Peremeshcheniye() Dim x x = InputBox(«Введите имя или номер листа», «Перемещение листа «Лист4»») If IsNumeric(x) Then x = CLng(x) Sheets(«Лист4»).Move Before:=Sheets(x) End Sub

Удаление листов

Удаление рабочих листов осуществляется с помощью метода Worksheet.Delete

Синтаксис метода Worksheet.Delete

expression.Delete

где expression — переменная, представляющая собой объект Worksheet.

Примеры удаления листов

‘По уникальному имени Лист1.Delete ‘По имени на ярлычке Worksheets(«Лист1»).Delete ‘По индексу листа Worksheets(1).Delete ‘В другой книге Workbooks(«Книга1.xlsm»).Worksheets(«Лист1»).Delete

Если рабочие книги указаны как элементы коллекции Workbooks, в том числе ActiveWorkbook и ThisWorkbook, листы нужно указывать как элементы коллекции Worksheets, использование уникальных имен вызовет ошибку.

Как обратиться к рабочему листу, переименовать, скрыть или отобразить его с помощью кода VBA Excel, смотрите в этой статье.

Apart from cells and ranges, working with worksheets is another area you should know about to use VBA efficiently in Excel.

Just like any object in VBA, worksheets have different properties and methods associated with it that you can use while automating your work with VBA in Excel.

In this tutorial, I will cover ‘Worksheets’ in detail and also show you some practical examples.

So let’s get started.

All the codes I mention in this tutorial need to be placed in the VB Editor. Go to the ‘Where to Put the VBA Code‘ section to know how it works.

If you’re interested in learning VBA the easy way, check out my Online Excel VBA Training.

Difference between Worksheets and Sheets in VBA

In VBA, you have two collections that can be a bit confusing at times.

In a workbook, you can have worksheets and as well as chart sheets. The example below has three worksheets and one chart sheet.

In Excel VBA:

• The ‘Worksheets’ collection would refer to the collection of all the worksheet objects in a workbook. In the above example, the Worksheets collection would consist of three worksheets.
• The ‘Sheets’ collection would refer to all the worksheets as well as chart sheets in the workbook. In the above example, it would have four elements – 3 Worksheets + 1 Chart sheet.

If you have a workbook that only has worksheets and no chart sheets, then ‘Worksheets’ and ‘Sheets’ collection is the same.

But when you have one or more chart sheets, the ‘Sheets’ collection would be bigger than the ‘Worksheets’ collection

Sheets = Worksheets + Chart Sheets

Now with this distinction, I recommend being as specific as possible when writing a VBA code.

So if you have to refer to worksheets only, use the ‘Worksheets’ collection, and if you have to refer to all sheets (including chart sheets), the use the ‘Sheets’ collection.

In this tutorial, I will be using the ‘Worksheets’ collection only.

Referencing a Worksheet in VBA

There are many different ways you can use to refer to a worksheet in VBA.

Understanding how to refer to worksheets would help you write better code, especially when you’re using loops in your VBA code.

Using the Worksheet Name

The easiest way to refer to a worksheet is to use its name.

For example, suppose you have a workbook with three worksheets – Sheet 1, Sheet 2, Sheet 3.

And you want to activate Sheet 2.

You can do that using the following code:

Sub ActivateSheet()
Worksheets("Sheet2").Activate
End Sub

The above code asks VBA to refer to Sheet2 in the Worksheets collection and activate it.

Since we are using the exact sheet name, you can also use the Sheets collection here. So the below code would also do that same thing.

Sub ActivateSheet()
Sheets("Sheet2").Activate
End Sub

Using the Index Number

While using the sheet name is an easy way to refer to a worksheet, sometimes, you may not know the exact name of the worksheet.

For example, if you’re using a VBA code to add a new worksheet to the workbook, and you don’t know how many worksheets are already there, you would not know the name of the new worksheet.

In this case, you can use the index number of the worksheets.

Suppose you have the following sheets in a workbook:

The below code would activate Sheet2:

Sub ActivateSheet()
Worksheets(2).Activate
End Sub

Note that we have used index number 2 in Worksheets(2). This would refer to the second object in the collection of the worksheets.

Now, what happens when you use 3 as the index number?

It will select Sheet3.

If you’re wondering why it selected Sheet3, as it’s clearly the fourth object.

This happens because a chart sheet is not a part of the worksheets collection.

So when we use the index numbers in the Worksheets collection, it will only refer to the worksheets in the workbook (and ignore the chart sheets).

On the contrary, if you’re using Sheets, Sheets(1) would refer to Sheets1, Sheets(2) would refer to Sheet2, Sheets(3) would refer to Chart1 and Sheets(4) would refer to Sheet3.

This technique of using index number is useful when you want to loop through all the worksheets in a workbook. You can count the number of worksheets and then loop through these using this count (we will see how to do this later in this tutorial).

Note: The index number goes from left to right. So if you shift Sheet2 to the left of Sheet1, then Worksheets(1) would refer to Sheet2.

Using the Worksheet Code Name

One of the drawbacks of using the sheet name (as we saw in the section above) is that a user can change it.

And if the sheet name has been changed, your code wouldn’t work until you change the name of the worksheet in the VBA code as well.

To tackle this problem, you can use the code name of the worksheet (instead of the regular name that we have been using so far). A code name can be assigned in the VB Editor and doesn’t change when you change the name of the sheet from the worksheet area.

To give your worksheet a code name, follow the below steps:

1. Click the Developer tab.
2. Click the Visual Basic button. This will open the VB Editor.
3. Click the View option in the menu and click on Project Window. This will make the Properties pane visible. If the Properties pane is already visible, skip this step.
4. Click on the sheet name in the project explorer that you want to rename.
5. In the Properties pane, change the name in the field in front of (Name). Note that you can’t have spaces in the name.

The above steps would change the name of your Worksheet in the VBA backend. In the Excel worksheet view, you can name the worksheet whatever you want, but in the backend, it will respond to both the names – the sheet name and the code name.

In the above image, the sheet name is ‘SheetName’ and the code name is ‘CodeName’. Even if you change the sheet name on the worksheet, the code name still remains the same.

Now, you can use either the Worksheets collection to refer to the worksheet or use the codename.

For example, both the line will activate the worksheet.

Worksheets("Sheetname").Activate
CodeName.Activate

The difference in these two is that if you change the name of the worksheet, the first one wouldn’t work. But the second line would continue to work even with the changed name. The second line (using the CodeName) is also shorter and easier to use.

Referring to a Worksheet in a Different Workbook

If you want to refer to a worksheet in a different workbook, that workbook needs to be open while the code runs, and you need to specify the name of the workbook and the worksheet that you want to refer to.

For example, if you have a workbook with the name Examples and you want to activate Sheet1 in the Example workbook, you need to use the below code:

Sub SheetActivate()
Workbooks("Examples.xlsx").Worksheets("Sheet1").Activate
End Sub

Note that if the workbook has been saved, you need to use the file name along with the extension. If you’re not sure what name to use, take help from Project Explorer.

In case the workbook has not been saved, you don’t need to use the file extension.

Adding a Worksheet

The below code would add a worksheet (as the first worksheet – i.e., as the leftmost sheet in the sheet tab).

Sub AddSheet()
Worksheets.Add
End Sub

It takes the default name Sheet2 (or any other number based on how many sheets are already there).

If you want a worksheet to be added before a specific worksheet (say Sheet2), then you can use the below code.

Sub AddSheet()
Worksheets.Add Before:=Worksheets("Sheet2")
End Sub

The above code tells VBA to add a sheet and then uses the ‘Before’ statement to specify the worksheet before which the new worksheet should to be inserted.

Similarly, you can also add a sheet after a worksheet (say Sheet2), using the below code:

Sub AddSheet()
Worksheets.Add After:=Worksheets("Sheet2")
End Sub

If you want the new sheet to be added to the end of the sheets, you need to first know how many sheets are there. The following code first counts the number of sheets, and the adds the new sheet after the last sheet (to which we refer using the index number).

Sub AddSheet()
Dim SheetCount As Integer
SheetCount = Worksheets.Count
Worksheets.Add After:=Worksheets(SheetCount)
End Sub

Deleting a Worksheet

The below code would delete the active sheet from the workbook.

Sub DeleteSheet()
ActiveSheet.Delete
End Sub

The above code would show a warning prompt before deleting the worksheet.

If you don’t want to see the warning prompt, use the below code:

Sub DeleteSheet()
Application.DisplayAlerts = False
ActiveSheet.Delete
Application.DisplayAlerts = True
End Sub

When Application.DisplayAlerts is set to False, it will not show you the warning prompt. If you use it, remember to set it back to True at the end of the code.

Remember that you can’t undo this delete, so use the above code when you’re absolutely sure.

If you want to delete a specific sheet, you can do that using the following code:

Sub DeleteSheet()
Worksheets("Sheet2").Delete
End Sub

You can also use the code name of the sheet to delete it.

Sub DeleteSheet()
Sheet5.Delete
End Sub

Renaming the Worksheets

You can modify the name property of the Worksheet to change its name.

The following code will change the name of Sheet1 to ‘Summary’.

Sub RenameSheet()
Worksheets("Sheet1").Name = "Summary"
End Sub

You can combine this with the adding sheet method to have a set of sheets with specific names.

For example, if you want to insert four sheets with the name 2018 Q1, 2018 Q2, 2018 Q3, and 2018 Q4, you can use the below code.

Sub RenameSheet()
Dim Countsheets As Integer
Countsheets = Worksheets.Count
For i = 1 To 4
Worksheets.Add after:=Worksheets(Countsheets + i - 1)
Worksheets(Countsheets + i).Name = "2018 Q" & i
Next i
End Sub

In the above code, we first count the number of sheets and then use a For Next loop to insert new sheets at the end. As the sheet is added, the code also renames it.

Assigning Worksheet Object to a Variable

When working with worksheets, you can assign a worksheet to an object variable, and then use the variable instead of the worksheet references.

For example, if you want to add a year prefix to all the worksheets, instead of counting the sheets and the running the loop that many numbers of times, you can use the object variable.

Here is the code that will add 2018 as a prefix to all the worksheet’s names.

Sub RenameSheet()
Dim Ws As Worksheet
For Each Ws In Worksheets
Ws.Name = "2018 - " & Ws.Name
Next Ws
End Sub

The above code declares a variable Ws as the worksheet type (using the line ‘Dim Ws As Worksheet’).

Now, we don’t need to count the number of sheets to loop through these. Instead, we can use ‘For each Ws in Worksheets’ loop. This will allow us to go through all the sheets in the worksheets collection. It doesn’t matter whether there are 2 sheets or 20 sheets.

While the above code allows us to loop through all the sheets, you can also assign a specific sheet to a variable.

In the below code, we assign the variable Ws to Sheet2 and use it to access all of Sheet2’s properties.

Sub RenameSheet()
Dim Ws As Worksheet
Set Ws = Worksheets("Sheet2")
Ws.Name = "Summary"
Ws.Protect
End Sub

Once you set a worksheet reference to an object variable (using the SET statement), that object can be used instead of the worksheet reference. This can be helpful when you have a long complicated code and you want to change the reference. Instead of making the change everywhere, you can simply make the change in the SET statement.

Note that the code declares the Ws object as the Worksheet type variable (using the line Dim Ws as Worksheet).

Hide Worksheets Using VBA (Hidden + Very Hidden)

Hiding and Unhiding worksheets in Excel is a straightforward task.

You can hide a worksheet and the user would not see it when he/she opens the workbook. However, they can easily unhide the worksheet by right-clicking on any sheet tab.

But what if you don’t want them to be able to unhide the worksheet(s).

You can do this using VBA.

The code below would hide all the worksheets in the workbook (except the active sheet), such that you can not unhide it by right-clicking on the sheet name.

Sub HideAllExcetActiveSheet()
Dim Ws As Worksheet
For Each Ws In ThisWorkbook.Worksheets
If Ws.Name <> ActiveSheet.Name Then Ws.Visible = xlSheetVeryHidden
Next Ws
End Sub

In the above code, the Ws.Visible property is changed to xlSheetVeryHidden.

• When the Visible property is set to xlSheetVisible, the sheet is visible in the worksheet area (as worksheet tabs).
• When the Visible property is set to xlSheetHidden, the sheet is hidden but the user can unhide it by right-clicking on any sheet tab.
• When the Visible property is set to xlSheetVeryHidden, the sheet is hidden and cannot be unhidden from worksheet area. You need to use a VBA code or the properties window to unhide it.

If you want to simply hide sheets, that can be unhidden easily, use the below code:

Sub HideAllExceptActiveSheet()
Dim Ws As Worksheet
For Each Ws In ThisWorkbook.Worksheets
If Ws.Name <> ActiveSheet.Name Then Ws.Visible = xlSheetHidden
Next Ws
End Sub

The below code would unhide all the worksheets (both hidden and very hidden).

Sub UnhideAllWoksheets()
Dim Ws As Worksheet
For Each Ws In ThisWorkbook.Worksheets
Ws.Visible = xlSheetVisible
Next Ws
End Sub

Related Article: Unhide All Sheets In Excel (at one go)

Hide Sheets Based on the Text in it

Suppose you have multiple sheets with the name of different departments or years and you want to hide all the sheets except the ones that have the year 2018 in it.

You can do this using a VBA INSTR function.

The below code would hide all the sheets except the ones with the text 2018 in it.

Sub HideWithMatchingText()
Dim Ws As Worksheet
For Each Ws In Worksheets
If InStr(1, Ws.Name, "2018", vbBinaryCompare) = 0 Then
Ws.Visible = xlSheetHidden
End If
Next Ws
End Sub

In the above code, the INSTR function returns the position of the character where it finds the matching string. If it doesn’t find the matching string, it returns 0.

The above code checks whether the name has the text 2018 in it. If it does, nothing happens, else the worksheet is hidden.

You can take this a step further by having the text in a cell and using that cell in the code. This will allow you to have a value in the cell and then when you run the macro, all the sheets, except the one with the matching text in it, would remain visible (along with the sheets where you’re entering the value in the cell).

Sorting the Worksheets in an Alphabetical Order

Using VBA, you can quickly sort the worksheets based on their names.

For example, if you have a workbook that has sheets for different department or years, then you can use the below code to quickly sort these sheets in an ascending order.

Sub SortSheetsTabName()
Application.ScreenUpdating = False
Dim ShCount As Integer, i As Integer, j As Integer
ShCount = Sheets.Count
For i = 1 To ShCount - 1
For j = i + 1 To ShCount
If Sheets(j).Name < Sheets(i).Name Then
Sheets(j).Move before:=Sheets(i)
End If
Next j
Next i
Application.ScreenUpdating = True
End Sub

Note that this code works well with text names and in most of the cases with years and numbers too. But it can give you the wrong results in case you have the sheet names as 1,2,11. It will sort and give you the sequence 1, 11, 2. This is because it does the comparison as text and considers 2 bigger than 11.

Protect/Unprotect All the Sheets at One Go

If you have a lot of worksheets in a workbook and you want to protect all the sheets, you can use the VBA code below.

It allows you to specify the password within the code. You will need this password to unprotect the worksheet.

Sub ProtectAllSheets()
Dim ws As Worksheet
Dim password As String
password = "Test123" 'replace Test123 with the password you want
For Each ws In Worksheets
ws.Protect password:=password
Next ws
End Sub

The following code would unprotect all the sheets in one go.

Sub ProtectAllSheets()
Dim ws As Worksheet
Dim password As String
password = "Test123" 'replace Test123 with the password you used while protecting
For Each ws In Worksheets
ws.Unprotect password:=password
Next ws
End Sub

Creating a Table of Contents of All Worksheets (with Hyperlinks)

If you have a set of worksheets in the workbook and you want to quickly insert a summary sheet which has the links to all the sheets, you can use the below code.

Sub AddIndexSheet()
Worksheets.Add
ActiveSheet.Name = "Index"
For i = 2 To Worksheets.Count
ActiveSheet.Hyperlinks.Add Anchor:=Cells(i - 1, 1), _
Address:="", SubAddress:=Worksheets(i).Name & "!A1", _
TextToDisplay:=Worksheets(i).Name
Next i
End Sub

The above code inserts a new worksheet and names it Index.

It then loops through all the worksheets and creates a hyperlink for all the worksheets in the Index sheet.

Where to Put the VBA Code

Wondering where the VBA code goes in your Excel workbook?

Excel has a VBA backend called the VBA editor. You need to copy and paste the code into the VB Editor module code window.

Here are the steps to do this:

1. Go to the Developer tab.
2. Click on the Visual Basic option. This will open the VB editor in the backend.
3. In the Project Explorer pane in the VB Editor, right-click on any object for the workbook in which you want to insert the code. If you don’t see the Project Explorer go to the View tab and click on Project Explorer.
4. Go to Insert and click on Module. This will insert a module object for your workbook.
5. Copy and paste the code in the module window.

You May Also Like the Following Excel VBA Tutorials:

• Working with Workbooks using VBA.
• Using IF Then Else Statements in VBA.
• For Next Loop in VBA.
• Creating a User-Defined Function in Excel.
• How to Record a Macro in Excel.
• How to Run a Macro in Excel.
• Excel VBA Events – An Easy (and Complete) Guide.
• How to Create an Add-in in Excel.
• How to Save and Reuse Macro using Excel Personal Macro Workbook.
• Using Active Cell in VBA in Excel (Examples)
• How to Open Excel Files Using VBA (Examples)

How to Create a Worksheet in Excel?

MS Office provides option to create dynamic spreadsheet in Excel during run-time.

Also, users can do to other worksheet operations like copy, move, rename and delete though VBA. Let’s begin by creating a new workbook or try downloading the Sample File at end of this topic.

If you want to learn how to do it in simple method, follow these simple steps.

Excel VBA Dynamic Spreadsheet Add – Copy Content

Here is an example, in which we have a list of worksheet names and their content present in single sheet. We are going to add new sheets as mentioned in the list and copy the content to corresponding sheet.

To begin with, create a new workbook and enter the Columns as in below image.

The above screenshot has columns as explained below.

• Column 1: list of Worksheet names to be created dynamically.
• Column 2 to 4: data to be copies against the sheet name it is mapped.

Sheets.Add After – Excel VBA Create Worksheet

Sheets.Add is the VBA command in Excel create worksheets dynamically during run-time. To perform other worksheet operations, we use the below functions.

• Add – To add a new sheet
• Copy – Copy a existing sheet
• Move – Move the sheet’s order
• Delete – Delete a sheet

Apart from these functions, below list are some of the useful properties that we use often inside Excel Macro.

• Name – To get or change the name of a worksheet
• Count – To get number of worksheets
• Visible – To make a sheet’s visibility.

To do this, copy paste the below code in Excel VB Editor and execute the code by pressing F5. (If you are new to Excel Macro, refer the Hello World program Blog in this site).

Private Sub CommandButton1_Click()
    Excel_VBA_Add_WorkSheets
End Sub

Private Sub Excel_VBA_Add_WorkSheets()
    'Declaration of Variables
    Dim iRow As Integer
    Dim Rown As Integer
    Dim TabName_Prev As String
    Dim TabName_Curr As String

    'Initialize Variables
    iRow = 1
    Rown = 1
    TabName_Prev = "Test"

    'Excel VBA Create Worksheet
    While Trim(ThisWorkbook.Sheets("Sheet1").Cells(iRow, 1)) <> ""
        iRow = iRow + 1
        TabName_Curr = Trim(ThisWorkbook.Sheets("Sheet1").Cells(iRow, 1))
        If TabName_Curr = "" Then GoTo End_Of_Process_Label

        'Create Sheet
        If TabName_Curr <> TabName_Prev Then
            ThisWorkbook.Sheets("Sheet1").Activate
            Sheets.Add after:=Sheets(Sheets.Count) 'Sheets.Add.Name = "New SheetName" will also work
            On Error Resume Next
            ActiveSheet.Name = TabName_Curr
            Rown = 1
        End If

        'Copy Data To Newly Added Sheet
        Rown = Rown + 1
        ThisWorkbook.Sheets(TabName_Curr).Cells(Rown, 1) = Trim(ThisWorkbook.Sheets("Sheet1").Cells(iRow, 2))
        ThisWorkbook.Sheets(TabName_Curr).Cells(Rown, 2) = Trim(ThisWorkbook.Sheets("Sheet1").Cells(iRow, 3))
        ThisWorkbook.Sheets(TabName_Curr).Cells(Rown, 3) = Trim(ThisWorkbook.Sheets("Sheet1").Cells(iRow, 4))
        TabName_Prev = Trim(ThisWorkbook.Sheets("Sheet1").Cells(iRow, 1))
    Wend

End_Of_Process_Label:
    MsgBox "Excel VBA - Worksheet Added Dynamically - Process Completed"
    Sheets.VPageBreaks
End Sub

Download Sample Excel document with Above Macro : Download 519

Excel VBA Adding Worksheet – Additional Reference

• http://support.microsoft.com/kb/107622
• http://stackoverflow.com/questions/3840628/creating-and-naming-worksheet-in-excel-vba